วีดีโอ

Poor video. You should have practiced.

You can do all this, or just dump in a bottle of K-seal and drive.

DO NOT DO THIS to your Prius IF you plan on keeping the car!!! Bought ours brand new in 2013 and it has 250K miles, but recently developed the Bad Head Gasket “shakes” issue. Thankfully found Gasket Masters videos BEFORE seeing this guys so-called “fix”. Am in process of doing GM’s excellent REAL fix. Correcting the issues is an involved project but not overly expensive DIY, unless you have other problems like a bad water pump. Also fixed/cleaned my EGR/coolant loop and throttle body/intake manifold, which were nearly blocked with carbon/soot. All in, I will spend about 3 days & $300 to have a vehicle that should last ANOTHER 250K miles. BTW in many cities GM can do the real fix in half a day for allot less than $2000. They also have videos that show what you do to an engine when you use this guys liquid “used car salesman trick”.

Thanks so much

Size of anl fuse?

I see the + wire going from red terminal through firewall and back to the trunk. But, in the trunk, there are 2 wires. Where does the negative wire come from?

My 2010 prius only vibrates only when I apply low Gass or going on 30-45klm and d funny thing it doesn't have check engine light on. Need help

Good stuff! Thanks for your help, man!

you said… 🫵😂 “little cock” 10:25

My head gasket is leaking oil into the cylinder. This wouldn't help me.

Mine was at 175k miles and I had to replace the engine according to mechanic suggestion, due to blown head gasket

Drain plug at 6:45 ish. All I came here for. Thanks for the video.

Next time record while you’re doing it

How many miles did the fix last for?

Just to clarify, you're still running without a thermostat?

How is the battery on it now?

3 years later, is it still working?

thank you so much!

What about a clean coolant system with water after using the radiator flush

I have cylinder 1 misfire but the car is not dying.

Thank you for posting the video. We have a 2010 Prius with 342,000km on it has ran great up to now. We did have the rattling going on didn't know what it was but when the heat stopped (we live in Canada) we found out coolant was leaking. Once you did this repair did the heater work again? Thanks again for posting the video!!

Hey bud so what part of that fixed your heat issues?

Not fixed

Thanks for this awesome video, Orlando. I'm on my 3rd Prius (a 2018 Prius Two Eco). Before that, I had a 2010 Prius Four and a 2013 Prius v. I LOVE these cars.

So its now 3 yrs later since you did this job. how has the repair held up?

Try putting flat microfying glass to make it hotter maybe 300 degrees hot..........

Very nice :-) I’m working on the same project at the moment. I think it would be nice to have the inlet tube reach the floor. Hope you had a happy Halloween🎃

Do you have mechanic jobs for me..i,am 12 years experience on automobile

Great review I bought a Mars Red 2014 350 second hand I love it 😀 got my first oil change yesterday let Precision do it $75 bucks but I'm planning to do myself hence why I'm here 👍🏾👍🏾

Use Moroso ceramic seal to fix head gaskets, Its $25 & they use it on actual race cars

so you removed the engine waterpump's thermostat as a safety precaution against it being damaged by the thermagasket mixture. it take a little cry and some tight spot moments to remove that thermostat that but a good idea if you dont want to damage sensitive parts.

Thank you so much for this video guide! I’ve scoured the internet for a guide specifically for a Prius when it comes to these head gasket sealer methods and yours is the most comprehensive that I’ve found. I’m gonna try the same thing on my Gen 3 Prius I’m just using a different brand (not blue devil). I love my Prius too much to let her go!

hello I just got the same cooler a couple days ago. I have a smaller yeti cooler. some things I found out after I got it out of the box. supposedly with the marketing materials they said that the drain plug is recessed Well it is slightly recessed but the cap itself sticks way out unlike the yeti which is recessed completely so if you wedge it in somewhere it won't break off or have any other issues. The vacuum release is a nice feature there isn't any gasket on it which is surprising for a cooler that's this expensive. I like the handles but one thing I noticed on mine I saw you operate yours and anyway the rubber latches are about two and a half times stiffer than the yeti. I hung some iron weights with a strap comparing the two because it seemed like it was difficult to open the frosted frog even though I'm not disabled or anything. The yeti rubber latches take 10 lb of downforce to operate. The frosted frog takes about 20 to 25 lb of downforce to operate. It seems like you have to sort of grunt and really put some effort into operating the rubber latches compared to competitive coolers. So I'm not really sure I'm going to keep it It otherwise looks like it would hold ice really well I like the color and it is only the latches and the protruding drain plug that for me are the major issues.btw, The current price as you probably know is quite a bit higher than what you paid! I bought this supposedly on sale at about $300.

Don't do it ! You will regret it in the long term.

👍

People DO NOT fill your radiator with stop leak garbage. It may seal the head gasket temporarily but it will also plug the fine ports in the engine , radiator and heater core. This will cost you so much more money later when you have to replace all the other parts it plugs up. I only would use that garbage if I was stranded in a area I had no way of getting home. Also his lower radiator hose clamp isn't fully on the thermostat, that will be a issue for sure.

I have the same problem cyc 1 mis fire changed spark plugs and coils. Gives me less jerking what can it be?

Such a good idea!!! Thank you 🤙🏽

If you’re in a pinch the head gasket sealer will work for awhile but it will ultimately still fail. The sealer then clogs the passageways and radiator as well. Best to just replace head gasket. Otherwise your just prolonging the problem. I’ve replaced 4 of these head gaskets, it’s fairly easy. Gasket masters have some great videos on how to do it.

i love mine had it 3 days !

I just bought some Thermagasket for my 2013 Prius 3rd gen. 178,000 miles, cylinder 2 & 4 are the issue. Let's hope this stuff works, if I can get at least 10k additional miles I'll be very happy with the product.

It should be nice if you show what did you used, what brand at least show the box. Search thermo gasket it didn't show anything.

Hi Orlando, is it still working for the Prius?

Hey thanks for the video I I also think the Prius is the best car in the world Got 2014 prius p0101 losing coolant too so thinking of Blue Devil or Thermagasket before removing the gasket

Radiator and hiter probably cloged

Is it still working im curious

I'm having same problem 2010 prius z200 engine .I cleaned out the EGR cooler intake manifold ..replace plugs .cleaned the injectors..cleaned the EGR valve still clanking .and same p0301 code p0300 .car is no loosing any coolant .bought it two weeks ago sucks .I know I can put that stuff in to seal the gasket but sooner or later it will happen again I know is a big job but got to do the right thing guys a temporary fix will leave you stranded when you least expect it .not good idea ...I don't have the heart to pour that stuff in and fix it just to sell it . I told the guy that sold it to me ,that anything you do wrong to others will come back to you sooner or later I told him you should had told me the truth dude. I know I'm stuck with it now. God sees everything nothing scape His eyes ...and like I've said cheap fix and sell it to someone else won't work for me, I Can't see anyone going through same thing I'm going through. Just to get even and let someone else get the same problem.....be wise love your fellow brother. Treat others the way you want to be treated...blessings

Hello , how it is the Prius , with the head gasket repair sealant?

How is your Prius now? Just curious? Cause I have the same issue, but I just approved a engine replacement for $2600 - $2700!!! Appreciate a response.

$100 to fix a Prius head gasket?!? That’s a lot of tampons going into that car.