วีดีโอ

Oh thanks! I was not aware that it works only with OpenVR. I agree, if game was designed to work on standalone headsets that kind of optimisation is unacceptable.

@@juu226 The game wors only with OpenXR, not OpenVR. The game runs on both Quest 2 and Quest 3 at 36 fps, which with ASW are reprojected to 72 fps. The game is developed with Unreal Engine 5, which has already sparked controversy in flat-screen game development due to poor optimization and the studios' lack of experience with modern tools. In many cases, the use of Unreal Engine 5 is a serious mistake. Maybe in the coming years, there will be studios that create blockbusters with good performance, but for now, it is limited to high-end hardware, which is a mistake.

@@alexzalvez I mant that I did knot know that VRperfkit is working only on OpenVR. I was surprised seeing it is not on Unity like Arizona Sunshine, graphics is not any better and textures are even lower res so I don't understand that decision, UE usually has problems with stuttering. I saw that day 0 patch is avaliable, maybe until next dozen it will polished as it should be 🙂

@@juu226 You can also use VRperfkit with many Oculus games with oculus runtime like Asgard's Wrath. The fixed foveated rendering and CAS filter helps a lot. I don't like FSR 1.0 for VR

@@alexzalvez I know I use it for years to optimize many games, it works even with HL:Alyx but usually I run it for only foveated redndering and preffer steam upscaling instead of FSR but in some titles CAS or FSR does the job better than build in solutions.

If you mean motions sickness when jumping through portals I don't have any.

@ Nice

@@juu226 he means the controllers for the portal gun

​@@judaspriestforever153 in game everything works fine but mod use only one hand so other is just for joystick movement

Not yet but from what I read ASR i AS2 are on same framework so should work similar.

Some drops are caused by recording with OBS. Most of the work is on GPU side here, on maxed out textures vram is fully loaded but so far (2 hours) I did not had any issues on that settings (drops only for moments like high explosions etc.). But performance is worse without VR performance toolkit even on half res textures so if you have same GPU I would recommend you to inject it (leave upscaling off, just use VRS), I pasted link in description.

At third part of video you have 120 cap, game will not render over on this GPU anyway so 60 is more realistic. So I dont get what was your point?

I did not tried turning it off completely but true, motion blur might take framerate down a bit, as well as recording.

Hard to say you need to match up resolution and graphics settings to compare and using dispay port vs real time compression via wireless links is also the case.

Sorry I did not played bonelabs yet but read on reddit that it had same issue, It was updated not long ago so maybe (just maybe) they fixed it.

Actually this was my first one on UEVR try and I did not got proper setup (there where problems with missaligment of center screen, arrow was not going where it should so it was almost impossible to hit target so I gave up) I just recorded this video to show how this game perform in stereoscopy on 3060 laptop. I do not get motion sick but low framerates can be eye exausting so I don't try most of UEVR games (most of them need 4080-4090 PC Imho)

@@juu226 Thanks for the quick response. I guess it will take some configuration fine tuning to get 90fps and the targeting. I really appreciate your inclusion of the overlay. I have a 4090 but UEVR performance still is too demanding on most titles.

@@ggegguri So even on 4090 you need to start by reducing every detail... Probably we have to wait 2 more GPU generations to play today UE games with this mod exept those less demanding. So far best performance I had with ILLWill (you can try demo) it works great in VR even on my low spec so you should have a good time there. BlackTail is not so bad in that term if I could run it but I see there is still no profile for it on uevr-profiles.com/

@@juu226 Thank you so much for pointing out the profiles website!!! I'm so stoked to find so many games I own under Works Perfectly. I hope one of them is tolerable enough for a full playthrough. Although I have trouble with fps, I'll have a go with IllWill.

@@ggegguri You welcome, if you have Outer Worlds or Subnautica there have dedicated mods (not UEVR) with 6 dof motion controls, should work fine.

No at this video, but with this game you can use fixed foveated rendering mod.

No game is scary.

On my laptop there is mini display port. I read that on some video out is also on mini USB-C so maybe try mini usb to display port converter.

@juu226 thank you. I went ahead with the hdmi. It recognised it all as dp, but when I hit connect. No pictures to tje headset but there is sound. So I'll send that back and try the usb c

@@leftyg4587 hdmi is probably to slow, usb-c will be over 20gb/s so should work but your laptop model has to have built in usb-c to dp alternative mode, most of newer models should or maybe you have thunderbolt this will also might work. good luck.

@juu226 OK thanks. I'm just under thunderbolt. It mite be enough. It's annoying when the app tels me I got a superior rig but no dp 😤

Press Home button on keyboard, you should see that info on left screen corner when game starts

@@juu226 Thank you, the problem has been solved

It is just a demo lets hope they can optimise it.

Nie da się. Chyba że w Magia i Miecz.

You can play withought a pc if you have a quest 2 or 3 and you use pluto sphere application or use nomad

Yea it was my first encounter ever so I was not sure what to do...

@@juu226 alright, ty. I might just build by myself a rtx 4060 ti 16gb setup.

If it is a PC not laptop i5 10 gen should be enough.

You supposed to see all settings in video tell me more I will try to explain.

@@juu226 it has custom preset from what I can tell

@@TheDaiky7 Sorry I forgot that it is not in english, yes custom: details - low, water quality - high, AA quality - low, ambient oclusion - off

Thanks, I will.

Hi, I am not sure what you mean. It does not require any mods, it is regular VR game and should run easy on your PC.

@@juu226 oh sorry I thought this was a UEVR mod didn’t realize it was an actual vr game

@@BigShootzVR Yep it is CryEngine game, but there are mods for flat screen CryEngine games to VR - FarCry 1 (works perfectly) and Crysis (this one I will not even start on my PC and it still does not have 6dof controls)

@@juu226 Ok and for me I have to have the full motion controls or at least half like Hitman VR or RE7 but like I said before I can’t even get the UEVR to download without Microsoft immediately deleting it!

@@BigShootzVR I see, you can use other browser to download if yours default prevents it and before running UEVR you need add an exeption to its folder in windows defender, I just did it yesterday for new version of UEVR (1.4 beta) and it works. But for most games you need better GPU than 3060 so it might be not worth it. I found only ILLWILL and System Shock playble on my laptop (SS does not have motion controls unfortunatelly).

If you mean sudden drops to low framerate making game unplayable but after restarting in same place everything works fine then yes it happens sometimes and imho those are some kind of memory leaks, I had this issues in Wizards Darkt Times and couple of times in Hubris.

@@juu226 Sounds right, I seem to not have the issues with air link but my cord shows good, the issue with air link is worse performance for me though; do you have any fix you've found?

​@@mastermason4766 I don't have Quest and I am using direct display port to GPU. But you can try free Steam Link app for Quest or paid Virtual Desktop - I saw lot of people complains about air link quality and experience. check "RIP Airlink, my impressions of Steam Link PCVR streaming for Quest 3, 2 and Pro" on YT.

@@juu226 Thanks, i'll check that out

@@mastermason4766air link uses a lot of vram for some reason, more than cable.

I had same issue, go to SteamVR controller settings and choose other binding from workshop.

Yes first part in 720, you can see resolution in overlay so I don't understand what you mean.

@@juu226 the highest quality you can even watch this video in is 720

@@insertnamehere4419 "GPU does not have problems to render in stereo but CPU struggles to keep up at moments" which part did you not understand?

@@juu226 Irrelevent to my comment/s. But you go ahead and beat that drum. I'm saying your PC is inadequate for VR, I dont give a crap what component is the cause.

@@insertnamehere4419 Nobody cares what you think about his laptop performance.

Hey, VR chat will be hard to show since some rooms are very demanding on GPU and will run poorly and some are basic which will work great, it depends who creates them and how many users are in place so it will be different experience for everyone.

Thank you for great demo, I recorded updated demo with more detailed monitoring tool for VR if you interested, this game will be so nice: th-cam.com/video/cU7uaL5CG9M/w-d-xo.html

Check if you have exact same settinds as me, I am sure I was not using DLAA upsampling.

Hey I don't have openxr toolkit but i tried vrperformance toolkit to apply foveated on UEVR modded games, no luck - they are not crashing but tool can;t apply all of the hooks judging from log. Maybe you need to choose this API (openXR) on SteamVR options first and then it will work but it is my guess only.

@@juu226 thanks. Overall when playing UEVR games I am trying to avoid Steam VR and rely only on WMR. Steam VR is reducing performance significantly in most of the games I’ve tried in UEVR. I think the only game that works smooth for me with Steam VR and UEVR combined is Roboquest.

@@juu226 I actually might try the tool you have mentioned. It seems like it is dedicated towards steam VR runtime rather than open XR runtime. Thanks for the tip.

@@pistopitpit I understand, don't have WMR hmd. Good luck with finding a way to apply this but check if you don't have bottlenecks on CPU, if so foveated rendering might not help there.

I could try but I have no other hmd to compare and there are some good videos on this topic check " Through the Lens - PICO Neo 3 Link VR with Virtual Desktop" from Day Dreamer VR

Thanks, I can see it is CPU but this Aorus was sold with dual channel memory so I there are 2 8GB sticks. Maybe 32GB ram could help a bit but I think I will not invest more on this one.

​ @juu226 just want to help you get the most out of your laptop, because I know how frustrating it is to have frame drops or inconsistent frame time's when gaming in VR since it's way more noticable and annoying than traditional flat screen gaming. Therefore causing the games to render as unplayable.

As far as I know it will not support motion controllers.

I am using Pico app and wired connection so can't say nothing about meta, but laptop with 4060 should met minimum specs if 3060 does. Pico app says that it is vr ready.

@@juu226 ok I’ma just stick with using steam pcvr for my oculus

You mean laptop or headset?

@@juu226 the headset. Or both because why not

@@Thakeb Ok sure, so never play on laptop battery, It is not enough power for good performance;) Headset is around 4-6 hours of gameplay when connected with display port. It will recharge but slower than power usage when playing, there is some option to buy external power supply and connect it to display port adapter but I think I am not playing long enough in one session to take advantage on that. Standalone (android apps) it will be around 2 hours, wireless to pc - maybe 3 hours.

@@juu2266 hours ? Too enough for me (: . I’m planning on purchasing a vr headset but there are too many options. Do you recommend buying this headset ? it has everything i need but I really want to hear your opinion if you don’t mind.

I was suprised too, one of the best looking and optimised games in VR.

If you buy Quest 2, 3 or Pico 4 you have both options anyway so try and decide what works better for you (you need fast router for wireless), I have Pico 3 Link and despite having wireless opportunity ended up using display port connection (simple plug and play without any problems regarding streaming and video compression). Off course without any cables is always more comfortable but it is easy to get used to it.

I think you could have slighlty better performance in games than on 3060 laptop so yes, sure. Native VR games will generally run better than modded ones.

@@juu226 Alr thanks

Yes in CC on gaming profile it is set to balanced by default, what is your problem?

@@juu226why do you make tests on power plan balanced? its misleading. Bruh

@@pixelsymbols ok I get it, it is not real benchamark, just gameplay capture. I play on power plan balanced since there is no noticable difference between this and high performance during gameplay (if any at all - hard to notice without some serious benchmarking scheme) so I leave it by default, misleading woulb be if I put there false data.

@@juu226 k 💜

I could but I don't have this game, it is to heavy for rtx3060 laptop to play in comfort from what I have deducted from performance captures on stationary GPUS. If you have decent GPU Pico Neo 3 link shoud be fine since it is display port connection.

No latency issues but I use display port connection.

framerate is independent from bandwit but true, I use Wi-Fi extender so connection is far from perfect. I use GFNow occasionaly now since founders/priority is so slow now even with loading times.