**Title: How to Edge a Kitchen Worktop with Edging Strip Using Spray Glue and a Laminate Trim Router**
**Introduction:**
In this video, I'll show you how to edge a kitchen worktop using an edging strip and spray glue, finishing it off with a laminate trim router for a professional, seamless look. Whether you're refurbishing an old worktop or working on a new installation, this step-by-step guide will help you get it right.
---
### ✅ **Materials & Tools You'll Need:**
- Edging strip (laminate or veneer)
- Spray adhesive (contact adhesive)
- Laminate trim router
- Roller or block (for pressing the edging)
- Clamps (optional)
- Masking tape
- Fine sandpaper or file
- Safety equipment (gloves, eye protection)
---
### ✅ **Step 1: Prepare the Worktop Edges**
Ensure the worktop edges are clean and smooth before applying the edging strip. Use fine sandpaper to remove any rough areas or debris, creating a flat surface for optimal adhesion.
### ✅ **Step 2: Measure and Cut the Edging Strip**
Measure the length of the worktop edge and cut the edging strip to size. Leave a little excess on each end to ensure full coverage-you can trim this later for a perfect finish.
### ✅ **Step 3: Apply Spray Adhesive**
Apply a thin, even coat of spray adhesive to both the worktop edge and the back of the edging strip. Follow the manufacturer's instructions for proper bonding time, usually allowing the adhesive to become tacky for 2-5 minutes.
### ✅ **Step 4: Attach the Edging Strip**
Carefully align the edging strip with the worktop edge and press it firmly into place once the adhesive is tacky. Use a roller or block to apply even pressure along the entire length, ensuring a strong bond. You can use clamps or masking tape to hold the strip in place while the adhesive cures.
### ✅ **Step 5: Trim Excess Edging with a Laminate Trim Router**
After the adhesive has set , use a laminate trim router to remove any excess edging strip. Run the router carefully along the top and bottom edges of the worktop for a flush, clean finish.
### ✅ **Step 6: Smooth the Edges**
Use fine sandpaper or a file to smooth down any rough or sharp edges left by the router. This will give the worktop a polished, professional look while preventing any sharp corners.
### ✅ **Step 7: Final Touches**
Inspect your worktop for any imperfections. Touch up small areas with adhesive or sand down any remaining rough spots to ensure a flawless finish.
---
**Conclusion:**
And there you have it! You’ve successfully edged your kitchen worktop using an edging strip, spray glue, and a laminate trim router. This technique will give you a durable, smooth finish for a polished look. If this tutorial helped you, please hit the like button and subscribe for more DIY tips and tricks.
**Call to Action:**
Feel free to drop your questions or project ideas in the comments below!
---
This version includes green checkmarks to emphasize each step visually in your TH-cam description.