วีดีโอ

How is it shifting after atf fluid change to amsoil atf ?

Hello, what is the torque wrench value?

Thanks for this honest review. I'll be going another route since I only have a pancake compressor.

the manufacturer recommends using the original fluid ATF WS automatic transmission fluid

The air will always enter around the threads on the bleed nipple, long before I got the Bilitool I got a bleed nipple same size as on the car, I drilled a hole straight through the nipple and soldered the tiny hole on the side of the nipple, then I replaced the nipple with the one I modified, snug it down attach your hose and you'll never get any bubbles from around the threads. Remember to put back the original bleed screw.

Does the car manual tell you how much fluid your transmission needs or you measured the amount you took out ?

Does this also double as servicing the front differential?

Can you still buy this setup ?

Used the Bilitools brake bleeder to flush the brake system on three cars. Also used it to remove gear oil from the rear differential on my 2002 Ford Ranger, thus avoiding having to remove the differential cover. It's a slow process because of the viscosity of the differential fluid (80w-90), but it removed all of the fluid. Next up: powersteering fluid maintenance. This tool has many uses.

I do not care much for those hitches using chains. You have to remove it before backing up etc. Big pain.

Thanks

What psi did you use?

Thank you for this information! God bless 😊

"Cold temps" not in tacoma. Lol. My 212k lmm acting like it needs new pkugsn negative 12 this morning barely started

Wow! That was way too easy .. MY nissan Altima 2012 required me to remove the glovebox. The filter literally to the left of the glove in an area you could barely fit 2 fingers.

Pre LP & LP same location?

Thanks for the video, helpful. You need a different exhaust on that thing tho!

you did share the part number! sorry... superhelpful video! thanks!

Hey are you willing to share the wire part number for the back break wear semsor

a gallon of coolant loss is crazy.

I can’t tell if you did this or mentioned it but you usually would want to keep the car level during the whole job

What the hell is wrong with your shoes. Whyvare tour toes still grippin the ground....lol?

Hi

Great vid. You make it look easy. Ill definitly go this route since being quotes 400 for stock install. 1/2 the price for twice the product doing it my self. I have a 2001 3500 dually. Will these fit?

Any preliminary modifications required? Or just unbolt old and put in new. I also have all the EGR still in tact. Stock y bridge and everything. This is just unbolt old and bolt new?

Get some plastic ramps fella!!!!

Did you use a shim kit for the hitch?

Or video help alote thank you 😊

Thank you, thank you for posting this! My local dealer wanted to charge me $750 to change these filters. I ended up spending just $13 on generic Audi cabin filters which fit perfectly. There is no way I could have it done without your help. Using a scale of 1 to 10, with 1 being straight forward and 10 being not-so-straightforward, this is definitely a 1/10. However from a fidgety, backbreaking, claustrophobia, and needing to be somewhat of a contortionist, it's a 11/10. AND, if you lose your grip on a bracket nut (like I did) and it falls 'somewhere', then the job escalates to a 17/10 while you spend hours trying to locate it. Overall, well worth doing it yourself because Lambo dealers charge like a wounded bull (pun intended). Thanks again for the video. You rock!

This is nice! The way it’s made up of multiple sections makes it a much larger open area than others.

It was a great time. Mom was enjoying the cruise too.

Fr I guess it time to pack up our bags and call it quits since he’s says it’s not a nice enough whip. All seriousness your car is stunning

Interesting video. IMO, I would NOT purchase this tool for bleeding brakes only, unless I was shop that did this all day long. But, for DIY, this is NOT the proper tool. I recommend a 6L or 8L or 15L fluid extractor. Can just purchase a brake bleeder adapters which are cheap, if the tool does not come it them. Which is a more versatile tool. Can use it for oil changes too. Plus, refill or keep the master cylinder from going dry piece is a horrendous design!! Just terrible!! I'd call this tool a failure...and do not buy.

why’s everybody hating on this man’s lambo 😭😭

Gtv

😂😢😢😂

That orange with the sun on it literally is one of the best all time colours for anything

Är du svensk eller för det var ju svensk rap😊😊😊

Yeah but even if we own those we won't let you drive our car because we'd be afraid you'd crash it and you would scratch the rim

Even if it ain’t the fastest car in the world ur still riding a lambo and he’s still a nerd on the internet lol

Sound like someone ate a hater sandwich and washed it down with a large glass of dumbass😅

That car is trash if it was a Diablo or Lamborghini Countach Maybe.

😂😂😂

Johnson George Brown Anna Harris William

Awesome thanks for the cabin airfilter video. Looks easy to do

make edits not clips with music

make short form and u guys be more popular

daangg

I thought you are supposed to run the heim out some threads, no?

Respect