วีดีโอ

You're welcome!

Glad it was helpful!

Hi! I can build one for you from the ground up or I can possibly track one down for you. How soon do you need one? Thank you, Tim Lower

Is this a hooklift application or roll-off?

@ I plan to go hooklift and I’d like an auto tarp as well. Thank you.

@@adamholbrook2281 I would try and decide on a hooklift brand. If you want to run different size cans Swap Loader is one to consider or Stellar. They will know what cab to axle you'll need and will also be able to guide you on the bumper. Check website for FMCSA. Keep in mind most hooklift vendors have bumper extensions that bolt or weld on that extends the bumper to keep you running legally. Make sure to also consider the transmission before picking a chassis. 3000RDS will provide more benefits than a 2500RDS. If you can deal with only running the hook in neutral and in reverse only, the 2500RDS will be fine. If you want to run it in forward and reverse gears you need the Allison 3000RDS. Limited forward speeds with the Allison 3000RDS too. Allow 10"-12" for a tarp tower along with your cab to axle.

You're so welcome!

They are actually a sealed OEM light. However, grote has a replacement LED sealed headlight. It's the same headlight used in Mack LE garbage trucks. Part# ends in 909515. We have them in stock if you would like to call us for a quote. Every customer that has upgraded to them love them. Thanks for watching!

@@michaelbartosiewicz752 why do you feel that way about the RPL22? We have many customers that love this gate. It’s lightweight, power down, and has ramp latch holes in every dock ext if you want to use a ramp. So I’d like to hear what it is you don’t like.

Mack will offer 4” deeper cab with the Anthem driver seat in the next model year/ 2026 builds.

It sure is!

@@rrtruckcenters I'd buy one. Saw it at the 2024 Toronto International Truck Show.

@@rrtruckcentersdoes it come with an option for a air bag gauge

@@carlosmedrano3549 Can you please elaborate? Air bag gauge for what? The FTR currently does not come with safety air bags. It will have air gauges for the air system for the air brakes only. Does that answer your question?

@@rrtruckcenters yeah sorry a suspension load gauge where it shows the psi in the air suspension

Sorry sir, we do not.

Safe Fleet. Look for trailer curtains. REAR ROLLER CURTAIN (RRCV)

Top bunk bed I can’t figure out how to lift it up

Same here anyone knows how to do it

Let me look into this for you and I’ll get back to you in a couple of days. Thanks

I've seen people do this, but I cannot say I'm aware of body company (Morgan for example) that does a build like this. There's a company in PA that you can take it to for a custom bunk build after it's built. www.pitremodeling.com/video

Yes, but you might favor the 5.29 gearing for faster speed and lower RPM's.

​@@rrtruckcentersс передаточным 5.29 он сможет ездить только очень медленно. Нужно, хотя бы 4,1

اين الوكيل بمصر ؟ اريد الرد

The FTR has a lot of company running the Cummins B6.7 motor… Mack MD’s, Hino L6 and L7, International 4300, and Freightliner M2. With our emission levels we continue to have to meet, Cummins is one of the few remaining standing. It takes too much R&D money to invest in the designs of these engines with the constant level changes. Also the reason we are seeing the push to EV’s. At least if the EV’s stop working we can use Cummins diesel generators to charge them.

No it's not the 6.7 that's in the ram

At least with it being the Cummins, you can get the delete done and have it running like it should.

Yes you can Frank, but must be ordered as derated from the factory. You can also order an MD6 with a 10k front and 21k rear. Only snag with a MD6 you cannot get it with a Allison 3000RDS if you're looking for a heavy PTO application (rear loader or dump truck).

@@rrtruckcenters Gotcha, makes sense. What are time frames to place orders through you these days?

I will get with my rep and work on this for you in the future, thanks.

The GVWR of the chassis is 25,950 lbs total laden weight. The dry ship weight from factory is 10,492 lbs. I normally add 1,000 lbs to the dry weight to cover when fluids are added, etc. Most applications you will be around 10,000 lbs of payload by the time you add a body. I can't state exact since every body application weights are different. So most applications you'll be able to haul around 10,000 lbs give or take on this truck under CDL. The only application that would limit your hauling weight would be like a rear loader, but you wouldn't run that on this truck since it's it's not the right tranny for that application. So 25,950gvwr is your total laden/hauling weight with body, driver, fuel, and co-worker in the cab. If you go across a scale and you're over that amount you can get a ticket.

@@rrtruckcenters I've been looking at it all wrong. I thought GVWR is the weight the truck is at NOT INCLUDING THE LOAD on the back. Cause I was thinking to myself, "Why would someone that doesn't have a CDL buy a vehicle that weighs 25,950 and it's 50 lbs from being over weight" lol cause then that would leave them 50lb limit of freight.

@@beezytalkingshit9319 sounds like you're on track now. GVWR= total hauling weight with load, driver, and fuel.

My 2023 ftr hooklift ways 17k with a 20yrd can and 50 gallon of fuel . 23k air ride rear 12k front

@@beezytalkingshit9319 that's funny. But I can see why you would think people are dumb. If you look at my truck I limit my self by de rating to 25,950gvw however if I'm over ( witch I do) sometimes I come in at 29k it's not a big deal. I would get nailed by the d.o.tbut as far as the truck it's just a # game for the government. The axel are 12k front and a 21 rear but 23k suspension so I'm not anywhere near hurting the truck because it's really a 33k truck with a different sticker

Hi Luke, anyone that does those small sleepers should be able to add one. Like any bunk, you have to factor in the length as your cab to axle measurement will change. The rear wall is sheet metal like all other trucks so it's the matter of having someone that is experienced with doing those. Thanks

Sorry it does not. The MD6 can we equipped with Allison 2500HS or 2500RDS. If you need an Allison 3000 but under CDL you can spec a MD7 with a derating of 25,995gvwr and spec with a Allison 3000RDS.

Nik, thank you for watching! The standard gear ratio is 5.57 but you can option for 4.88 if you choose. If you run mainly flat ground, the 4.88 would be the one you would favor. Concerning the room behind the cab... they currently do not have a deeper extended cab. I was not aware that DOT has a minimum requirement for a DOT regulation for a sleeper, so for that I thank you! The cab does have a track in the ceiling that could be used for a privacy curtain though, but that is not advertised. With your provided info, now I know why. Thanks.

Yesi just bought a 2023 ftr I haven't measured it but it's pretty big I'd say close to 24. There's a track in the ceiling for a curtain.

Only Eaton Fuller manual trans available now, sir.

@@rrtruckcenters ok Thankyou for letting me know

The 19.5” tire. I will warn you though, Isuzu, on the new trucks, they install all drive tires, including on the steer axle. If I were buying a new Isuzu I would immediately remove the steer tires and save them for the rear axle and install true steer tires. The 19.5” take on the potholes much better in the snow belt areas. Thanks

@@rrtruckcenters is the suspension ride quality better than driving a Chassis cab ( ford 350,450,550) Or is about the same? I read online that chassis cab Ford are very uncomfortable to drive/ride is Isuzu better??? Many thanks

@@vikingored7469 there’s many factors that come into play when answering this question. If we are just talking ride alone, yes I would say they’re similar. When you factor in turning radius, visibility, comfort of hauling three people for a day cab, hands down the Isuzu wins the battle.

Hi Carlos, the Mack MD Series is currently only available with the Allison 2500HS or 2500RDS. No manuals are available. Thanks for watching.

Amil, we are not aware of any relocation kits available for the DEF tank. I feel it's safe to give you a no on that question, as there would be some wiring harnesses and sensors that would come in to play.