วีดีโอ

my locking screw broke off my first 10 shots

I had the 9mm version and it was nothing but malfunctions. ('I've been shooting for over 50 years, so don't tell me it was the ammo, magazines etc. it was just crap) now one in .22 came into our shop for me to repair. it's a POS. The customer said it's been repaired a few times and keeps falling apart.

where do i get a holster for it? i have a g17 gen 3 with the laser / light

I've gone with the Harbor Freight Rock Tumbler. I use the small stainless steel rods in it. I vary with solvents but last night I used some Balistol, Citric acid powder, liquid dish detergent and water. I ran the baffles for 24 hours and they came out almost completely clean. I did have to scrap some lead caked on a few using a small knife and/or a brass bristle tooth brush. Another thing I did last time, and I believe which made cleaning a breeze this time was to, once completely clean, I baked the baffles and tube in an oven at 250 degrees for about 30 minutes. From the oven and still hot I immersed all the peaces in a jar of silicone oil (which I purchase on Amazon for this purpose). After the pieces cooled (I actually left mine in the bath overnight) I let the silicone oil drip off the pieces but re-assembled the suppressor with the pieces still coated in oil. The oil does two things... I think it acts to make the suppressor essentially a "wet" suppressor and I really believe the heat treatment and soaking allowed me to wipe off most of the carbon. The Rock Tumbler and steel rods removed most of the lead. The biggest issue for me now is the lead. It is not as excessive as it was before the silicone oil treatment but is still occurs. I'm wondering, since the melting point of lead is much lower than stainless steel I wonder if I can "spot" melt the lead using a blowtorch??

I had no issues putting the oiler and sling on mine. No mods were needed

Chiappa M1 Carbine is super fake gun. I had purchased one in 2012 until 2023 I never took it to the gun ranche to shoot. Everything is plastic, magazine, trigger, trigger guard, and both sights are plastics as well. The reason why kept it for a decade and never took it to a ranche because I felt so sorry to the gun is not a real gun like the wwii M1 30 Carbine. So I took it to the gun shop and sold it for cash.

Can you find the black and gray ones anymore?

kicking around the idea of getting one....i had an M-1 carbine back in the 1980's and it has been my favorite firearm ever, (i have owned firearms since 1964)......

ok, was gong to get my chainsaw to open the bpx. nope still couldnt get in. used my mora and shattered the plastic box. problem solved.

Can the Rx be used with a 300 blackout??

Just finding this video. What is the diameter of the Rx?

Where can you buy one?

Thank you for making the video that way -- you need patience to run many rounds for the baffles to be completely clean. The ratio is also important. You can use purple power in full strength too (no dilution), which would make the cleaning faster.

I got this same light iv come to the conclusion tha I got a bad light it’s drains my battery pretty quick

I purchased one of those for my g17 that basically stays in my nightstand drawer. It is definitely bright enough for inside the home and walking around the perimeter of my property. I wouldn't put the light through too much stress or drop it very much but for what I need it to do it works fine.

What is that lanyard called I’ve been looking and I can’t find any that fit right

Sum m1-22 cum wit a tag on de trigger guard that recommends Federal ammo.. I'v used CCI & SK & Federal wit no problem.. luv my littl m1-22 but still gotta git my m1 30cal out now & then..

You have the ONLY video on the rugged rx on TH-cam

Any recommendations on cleaning aluminum baffles n parts?

how much

Is $69.99 at Academy sports as August 30 2021

I put this on my 300blk pistol. I think it’s great quality

I will buy that rx

Where did you get the sling??

I purchased one I love it but the green bean and stopped working is there a number I can call for the warranty gun shop told me I had to send it back to get another one is there a number I can call😳😞

LOL I love how in the slow-motion you see it eject two casings in completely opposite directions.. I mean you get what you pay for. This still comes in at a fair amount less than the next cheapest .22 semi-auto rifle in my area. Looks nice, but doesn't perform great. And I would not expect it to. I learned very early on that firearms like this and the GSG-16 for example are nothing more than cool toys. Fun to pull out and let friends shoot, but try and get any real accuracy out of them, use them for extended periods or use it at any distance and you will be disappointed. Not to mention cheap semi-auto .22's jam. They just do, and that really takes away from the fun. I say stick to a Ruger 10/22 or Savage A22, and save up for the real M1. Good video btw!

How do u sight in laser

The packaging is ridiculously difficult to open. Not a great first impression.

I used C.L.R. and it gets my baffles clean..

Where did you buy the baffle removal tool? I have tried finding online but everyone is sold out.

How can you honestly review an item you've never used?

I had one, what a piece of shit! My charging handle broke off and continually jammed. DO NOT BUY, YOU WILL REGRET IT.The customer service is nonresistant. Could not replace charging handle.

Most important question. Can you screw the surges adapt module to the RX?

I bought it and it's really nice

I waited til the first suppressed shot then subbed

ERMA LR22 VS RUGER 1022

Hey Matt, do you still have the Rx? How do you like it? Want to sell it? I've been looking to buy one but can't find it in stock anywhere

Had mine for two years and not a problem. The batteries are high but other than that works great. I have it on my Glock 19 . Not spending 100's of dollars on a light when this one works great for me.

Where did you get that pouch from! Looks cool

Look for an old Erma. Can't speak for all of them but mine works flawless.

Mine is a jamo’matic but I still love it, and my kids love it especially after seeing an M1 Carbine in The Walking Dead. I’ve shot pretty much everything through it but CCI, but I’m going to give it a try now that’s I’ve shot up all my other brands.

I have a question about your blast baffle. I ordered this very same suppressor got to look at the internals of mine and my blast baffle is stainless steel like the rest of the other baffles. In the video your blast blast baffle looks like it’s made out of a different metal. is that a first run batch and did they change up the material used for the blast baffle.

"Chespest" ??????? C H E A P E S T ! These are good cans, I have several.

I have one in black composite. It is very good you just have to oil it and use CCI ammo 1200 fps or higher. You follow this instruction you will be ok.

Talks too much get to man

Before you buy a Chiappa READ THIS! I am over 60 years old and am a recognised local gun expert. I have owned thousands of guns in my life time and currently own well over 100. So when I recant the following, I know what I'm talking about! I purchased a new synthetic stock version M1-22. It was keyholling at 20 feet, and the rear sight needed be set nearly as far to the left as it would go to even get it to hit a sheet of plywood. Accuracy was non-existent. I should add that the rear sight adjustment knob would just spin and appeared to be stripped out. After some dialog with Chiappa I was allowed to return the rifle for repair. A month passed after tracking indicated they had received the gun, yet I'd heard nothing from them. I sent them a message, several days later they responded that the rifle's repair had been but "put on hold" as they needed to take it to a range, they had none at their repair facility, and that this could take a couple weeks. Another month went by, still no word. Just as I was going to contact them again UPS showed up with the gun. It arrived with a test target showing three groups shot at 20 yards. Each was 2" or more to the right of the bull. I noticed, the rear sight was adjusted nearly as far to the left as it would go. An invoice stated, "Barrel replaced", "Accuracy is now good". While "accuracy" might have now been acceptable, the fact the the rear sight was nearly as far to the left as it would travel was a clear indication that something was still wrong. I test fired the gun and duplicating their test target. I messaged Chiappa again. They responded with a lecture on bullet differences, shooting styles, and advising ME to shoot the gun again. I had to re-point out that it was THEIR own test that resulted in rifle's performance(test target). They further stated that the sight travel was "within our acceptable standards"! Currently the gun is on target at 50 yards with the rear sight is against the LEFT stop. I'm left to wonder if I were to instal a scope if it would have enough adjustment to get it sighted in? A word on ammunition. The gun shoots fine with CCI Minimags, however one in five PMC Zapper will explode with a bast of gas in your face. You may have seen the video of this same behavior using Winchester ammo. I am currently in a state of limbo with Chiappa on this gun. One thing is for sure, given the quality evident in this gun, combined with the attitude demonstrated by the company, I'll never own another of their products! Dennis

I purchased one from Academy sports in July 2019, works fine but the battery life is terrible. I think I have a bad unit as the battery goes dead even when not in use. I put a brand new battery in it and left it alone for a few days. I went to turn it on and the battery was dead. I contacted Iprotect, they need my proof of purchase which I dont have. I contacted Academy Sports, they are looking up my purchase for me, hopefully they find it. Once I get that I can fill out a warranty claim. Anyway, I hope to get it worked out!

My son has one. It's fussy on ammo. He hates it! I told him before he picked it out that it's a replica designed for looks. I think it's a pretty little rifle that shoots OK. My 10/22 blows it away on reliability.

Great review, I have one and it is not as reliable as a Ruger 10/22. But they do look awesome as you said, Thanks!

Need help looking for a holster that fits a Springfield 3.8 with this light attached