วีดีโอ

6:46 could you mark "made in china" directly on the scale... that would be funny

I have to disagree with you on a couple points with this knife. I have the same model in brown micarta. There is some slight flex in the handle but only where the liner lock cut-out is located. This is similar to other micarta handle knives with liner locks. Yes the clip is not great and should have two screws, but I haven't had a problem. Lastly, the front flipper tab works fine. It's best used for the "reach-around" method. This knife costs about 40 and IMO it's a good deal on a budget knife with a interesting lock for that price.

Im like alot of us and spend amounts of money the average person wouldn't ever understand. But the value for money on the migurons is insane. Moyarl is the best budget knife ive had so far. And titanium clips on sub $50 knives is crazy. Ive had premium knives with flimsier pocket clips.

👍

The Slyther is one of my favorites. I got the two tone blade with grey G10.

Appreciate the crappy knife reviews!

is that a self-defense

Can you make it thinner by removing/replacing parts ?

I got the Fintiso button lock..not sure of the name..but it is great. Picked it up with the 40% off coupon the other week for $27 after taxes and with free shipping. Really digging it a ton and think I might have to try this one out from the vid as well

Thanks for the video. I have both tools and they are nearly identical. I will try your mods. They come with the double ended bit, however the Philips side is #1 Philips. I switched it out for a double ended bit which has a #2 Phillips on one end. I only use the knife blade and screwdriver and would prefer the small and lighter weight Gerber Armbar Slim Drive. However, the Gerber doesn't have a belt clip. Also the bit is similar but doesn't have the ball. It is held by magnet only and I lost the bit when I dropped it while working on a lift. I can't find a replacement bit. I'm going to try to grind off the ball from one of the replacement bits I purchased. If that works I will use the Mossy Oak belt pouch with my Gerber.

Ordered and received a mossy oak 12in1 multitool. Upon inspection found the flat drivers to be machined so thin were actually sharp and most likely would bend if used. Going to return. Do all of these 12 in 1 multitools have the same problem? Anyone have same experience????

I bought one, and turned round and got another; both Mossy Oak.

vossteed should made one !!! in a 70-80bucks range !!!! that thing would rock i bet !!

Good video man. Was wondering about this tool and I ended up buying it for the same reasons: half the size of a Leatherman and I don't need pliers in my day to day. Thanks for the mod suggestions and looking forward to future vids.

You know what I appreciate about this video? I didn't feel like you were trying to sell me something from a company that sponsored you like many of the "big," channels do. It just seemed like a no BS, honest review.

I "liked" your video bro....lol. You seem pretty knowledgeable about these tools, but more so the entertainment value is good. You'll see as you move forward with these videos, what more you should include, and what crap you could do without. Good luck in future videos, new subscriber here !

I just picked this one up for $27 after tax...what a steel.

Scales look great

Bought one that was on sale 25% off, then a 44% coupon. $20.00 for 14c28n, I will do that daily.

Awesome video! I was unable to understand the brand/model of the 4th knife you talked about,.. Can you share more details? I really like it!

Buying knives a couple months. You go boy. 1:30 1:31

I greatly like your suggestions on quality blade deals. I bought the Fintiso you suggested. Surprisingly Excellent knife.

Revive model by Defcon is legit. Good steel. Great size. Do a review please.

I love the Sacra, but this PF isn't for me. Back flipper only is a deal breaker. That carbon fiber is really nice, though. Also, I've often thought the same thing about some of these reviewers who claim to have carried extensively every knife they review. Do some? Probably. I'm sure most do not. Durka durka.

Definitely saving up for the f5.5 but this will do for now. $14 with discount on amazon rn.

if you want a good quality 60 blade you should look into the 60xt blades for the havalon piranta knife, or the 60a blades. they are really nice blades, they are thick so you might need to use some sandpaper to expand a little bit where the blade clips on. the 60xt blade are a little bit thinner than the 60a blades so they might fit better! the cheap 60 blades are kinda dangerous because they will snap easily and fly everywhere... buy descent blades, swann morton is also good blades, but the havalon piranta blades are the best!

What is your favorite beverage?

60-62HRC rating is very good. I hope it is true but it definitely does the job for my needs.

I appreciate your unprofessional reviews. My only suggestion is to remove some of the adjectives. Especially the F words.

I almost bought this model but with my hesitation I ended up getting a better deal on the other model from Fintiso (ATLAS). This is the ROOK series. Fintiso Models, not all are available on Amazon though. ROOK SERIES ATLAS SERIES APOLLO SERIES COBRA SERIES POSTS

You give it to a little. He will never cut himself and he will think it soon cool. Lol

...what-on???

The only complaint I have with the review is that the accident with the scabbard is your own fault as you put it in backwards... If I still had my knife collection, I would have had to have one of these in my WEIRD knife collection, but it would have never got used at all...

So why not name the better options at 45 bucks bro... And since your filming this on your fucken phone😅😅😅.. Don't sound so fucken bored doing it.. 🤣🤣🤣🤣..

This was hard to watch ...

That thing looks about as useful as tits on a boar hog.

Ridiculous ❤

I have that same gray PVD blade/gray G10 Moyarl liner lock, purchased after you recommended it to me on Reddit. It’s phenomenal, easily the best quality for the money for anything under $100. They look even better in person. Photos and videos can’t fully capture the shimmering effect of the PVD coating. And the Moyarl is actually the perfect size for me to reverse flick with my index finger instead of my middle finger, which is really nice and not something that I’m able to do easily with any other knife with a blade hole.

Miguron makes great stuff. I have a couple of their AMEight branded fancy shits and theyre great. But i want a Moyarl bad. Also cant believe i havent grabbed one yet but ive got to grab the Pyrite Alt also.

Thanks for the review. Yeah, that looks like some design that got set to the side from an actual OEM maker. You're right about it having features that hint towards a designer that has a bit more experience than just shitting out gas station knives. Im always interested in these random Amazon gems. Ive done the same thing with searchinf for 14c, vg10 etc. Have stumbled upon some cool random stuff.

Dude, your general WTF'ness over this... "implement" was the best part of this vid. Had me rolling 🤣. Got a sub from me.

I enjoy the fantasy you dreamed up lol. I ordered the aluminum version after seeing this review. I must have at least 10 knives that I bought on Amazon that I'm like that deal is to good to pass up and now I can't help but look at them and think I could have bought a few quality folders but such is life.

On a dying planet why does this exist and is getting shipped across the world? It’s like a cheap metal tumbleweed in the service of general entropy

you can hang it on the wall and scare the crap out of your guests, or repurpose the handle by removing the mechanics and adding a couple of slabs to make a usable handle... the steel is good, and the shape is enough to scare the junkies... nothing more, nothing less...

Junk from Chyna

😂😂😂

A $10 knife and $9 scissors would be twice as useful as that monstrosity.

I got the silver one, and I really like it. I’m a sucker for these weird Amazon knives. Looking forward to them coming out with more models

crazy that you picked the EMPEDC clone. favorite fidget knife in the arsenal by far. same exact $40 Ultem style too. once i got it tuned, i was floored by how butter smooth and rock solid it was…at almost less than what the tax would be on the Relative. centering, blade play, detent, action, it checks all the boxes of much more supposed refined knives. i originally bought it to see if i would like the original, but now i just don’t see the point because ill probably be disappointed. i’ve bought 2 more since then in Ti and going for the frag handle Nymble clone next.

I’m enchanted by this as well. Your fumbling and general overwhelmed unboxing brought me to tears of laughter; thank you Dirk!