วีดีโอ

only the very first model of the WA480 had the belt drive reduction gearbox, MT switched since a while to a 2 shift planetary gear with a smaller BL motor, that is the same drive system the L260H has. But I still like my belt drive system as I have optimized it: the 4250 BL motor has got hall sensor, so it can start up very smooth, nearly like a stepper motor. Then I changed the pinion and the belt so from a 20:50 ratio to a 14:60, which reduce the speed and make it smoother. Overall I can say, that with this mods, the original belt drive is great, you have a very good low speed behaviour, a good "max speed" without shifting a lot of power / torque due to the big BL motor... but the adaption of the hall sensors is not so easy... that is the new gear box: th-cam.com/video/CGSx2nE3IQQ/w-d-xo.html and that is the sensored BL Motor upgrade: th-cam.com/video/yjYdPIWwmUs/w-d-xo.html

it is a Squere 70 A ESC; as I I was during the time one of the first commercial AM32 ESC, meanwhile you can get plenty: sequremall.com/collections/accessories-for-climbing-cars/products/sequre-2670-brushless-esc-2-6s-lipo-powered-70a-firmware-blheli_32-am32-supports-128khz-pwm-frequency-suitable-for-fpv-racing-drone-multi-axis-drones-fixed-wing-uav-model-boats-climbing-vehicles?variant=42957004406972

@@wbuchner666 ok thx mate

@fadesm: I like it as well, it was the first prototype, but I am sure MT will release one soon, so stay tuned

I got my one direct from MT Modelstore in China, since I have the direct contacts to the factory. What I like is the wide range of the performance: - Driving can be extremely slow on the low gear with the AM32 ESC, on the other side it can drive quite fast, so you can do the transfers or faster moves if needed. Most of the time I was on the high gear, but still the low speed behaviour is smooth. -The same on the hydraulic, very smooth and low speed movements, but also power for a fast lifting of the arm and still enough oil flow to close the bucket...

@@wbuchner666 thanks for your feedback, I was reading your post on the german forum. very nice upgrades you've done. I really love the L260 version of the real model, this RC version is looking great too. Congrats on your new RC loader.

Es gibt im Modellbauforum einen Bericht, aber eine Anleitung oder Druckdateien wird es nicht geben

@Brunoxtr yes I designed a new banana which is from the geometry between the initial one with less bucket travel and the latest stock one with too much travel frimmy point of view

@@wbuchner666 Is there any way you can share the blue print or diagram so I can make a similar one please

Nein, das ist meine eigene Konstruktion nichts Bruder, hier gibt es mehr Details zur Baustellenampel: die Entfernung waren ca. 45m, mehr war räumlich wegen der Straße nicht möglich, die Funkverbindung war nicht das Problem modelltruckforum.com/forum/index.php?thread/62705-funk-baustellen-und-mobile-kreuzungsampel/&postID=840146#post840146

Hi the hubs of the rims are fixed with the M3 button head screws, you have to remove them. Then you can take of the hub, the inner part of the rims is secured with a shaft locking ring on the inner side, than you can remove the outer part of the planetary gear... but why do you want to replace it, they looks from stock quite goo, ok a little bit big, but that is linked ot the planetary gear and the ball bearing behind...

​Ah i see that mean i can remove that hubs it seems to me rims without hubs its better like real one you know ​@@wbuchner666

Hi Lars, ich habe von Kampfshoff eine 1000ml Minipumpe verbaut, dazu muss aber auch eine doppelte Ansaugleitung verbaut werden... nachdem ich noch die 1. Generation Brushlessantrieb habe, habe ich den auf Sensor umgebaut, dadurch ist das anfahren schöner....

@@wbuchner666 ah OK, vielen Dank für die Info😉👍🏻 Ich hoffe, ich kann das umsetzen, wenn es dazu kommt 😅

I ordered it direct from MT in China. and I haven't had big problems, one servo from a valve died... but I did some upgrades, which are meanwhile incorporated in the latest versions...

Hallo, der Auszug ist im 1. Segment mit einer Trapezspindel realisiert und wird über einen Seilzug auf den 2. übertragen. kann dir evtl, vom CAD Modell ein Foto machen....

sorry for my late answer, the weight is 18kg so maybe a little bit lighter and smaller than the WA470, but overall "nicer" and with more functions. like hydraulic quic coupler or aux hydraulic...

@@wbuchner666 also how can I look for this kind of events I see on TH-cam’s

@@outsdr925 this video was taken on a private parcours, but I was also in Friedrichshafen, Wels (Austria) and some other, we have a nice community here in Bavaria...

Der Motor hat laut Aliexpress 15W ist ein R-555 mit einem Durchmesser von 33,5mm und einer Länge von 57mm

What do you want to see? the hydraulic is under the battery tray so you don't see a lot, but you can check my other videos, where you see the WA480 in action, maybe this gives you a better understanding how it operates...

Hello, yes I improved the settings a lot, with the Radiomaster TX16S you can use customized curves for each valve, togehter with the mixer for the pump it improves the control of the cylinder a lot...

@@wbuchner666 Ah Okay ..That cool Thx for your replay i appreciate it man 😊👍

Hallo, im Prinzip gar nicht viel: mir war nur die Pumpe etwas laut und die Fördermenge zu gering, jetzt ist eine Kampshoff Minipumpe mit 1000ml drin, die aber über 2 Saugschläuche am Tank angeschlossen ist, der Rest ist nur optimieren der Ventilkurven im Sender

Der komplette Drehmotor wurde durch einen 36mm Planetengetriebemotor (Bürsten) mit 43 RPM getauscht, angesteuert wird der Bürstenmotor durch einen Servonaut MFX

@@wbuchner666 Danke für deine Erklärung

@@wbuchner666 ich fragte weil ich mir den Bagger im Januar zulegen wollte

Ich habe den Sender schon lange ausgebaut und verkauft nutze meine Radiomaster. Kann Dir da leider nicht helfen....

@@wbuchner666 danke dir trotzdem fg

Hello, the valves are the standard ones from MT-Modlestore with a preasureless return on neutral position, as the valve is mountend "deep" inside the back it is hard to make photos. on my other video with the new pump you see at min 1:14 the valves: th-cam.com/video/AxQ3lZrTRHw/w-d-xo.html

the bucket was designed and CNC edging by a friend. The rest of the mechanics is my design and build, but MT will also release a high tip bucket soon, but I like my one , especially since it is lighter, I used only 1mm steel and just doubled it on the area where it is needed... last but not least my one is unique... 😝no one else has it....

@@wbuchner666 Ah excellent work👍 yeah i wish from MTRC made bucket like your one and light weight than Original one especially JDM 870K she have heavy bucket... Half the weight from the bucket 🤣🤣🤣🤣 ..well Thx Again dude ..we wanna more video good luck Cheers🍺

@@The-Warm-voice1359 you are right a light bucket has a lot of advantages. But I think in a mass production, where speed is key, thicker steel parts are much easier to weld... therefore most of the commercial buckets either for loader or excavator have quite thick steel plates. But I am sure MT's high tip bucket is working and from cost point of view a great deal. my unique one pcs bucket was quite expensive, if you calculate every part I need to order...

@@wbuchner666 very well bro .👍 Yeah when the bucket comes heavy that will hinder lifting the arm when lifting the sand But JDM 870K have heavy bucket it is very strong ....do you know my dear friend JDM 870K strongest than xd komatsu wa470 and MTRC komatsu wa480 even JZM cat 950 wheel loader ..when you try 870k you will change your mind 🤗

Hi, I am very happy with the loader, I haven't had any problems so far and my son is playing always full power without regard to losses. So a hardcore testdriver 😂... But I have upgraded the motor to a sensored brushless motor and a more powerful Kampfshoff pump.. I would buy the loader again.....

Thanks this is great information. I read it has a belt reduction drive on the transmission is that correct? Obviously been no trouble

​@@hopvalleyminimining7672your welcome. yes it has a belt drive reduction, but it is working very well. the axle have in addition an outside planetary gear, so the torque on the main gear is not so much... And it is very silent....

Thank you that’s great to hear from someone who has already been using one for a while. Feel much more confident in ordering

no problem with the sound, the volume was still set to a low level, as I did some test drives at home before... anyway it was overall quite noisy on the parcours, the sorting machine and so on are making already a lot of noise, so if everybody has a loud sound module you can't talk... and most important for me on a sound module is the horn… 📯

@@wbuchner666 Ohh good job then yeah i love that 2 i thought you have problem with sound group But when you do this thing for your guys Until Can spake with each other i want say well done so is that bucket on your komatsu the new flat

@@The-Warm-voice1359 the new flat bucket is great, to be honest: I think for 95% of the jobs for a RC wheel loader the flat bucket ist the best option, I leave meanwhile the delta bucket with teeth at home...

@@wbuchner666 i agreed the flat bucket is perfect it also gives a beautiful view and about the original bucket with teeth that for rocks jobs i'm think about one like him but i will let the seller paint him in yellow color and then buy him is great for dirt and sand and sand combing

Hallo Mike die gibt es seit neusten bei MT Modelstore in deren Aliexpress Shop notfalls per Mail anfragen, falls sie noch nicht gelistet ist...