วีดีโอ

Thank you very much. I would like to find the best thinner for revell30 like you did, but my chemistry is at low level. Lucky this kit is available in shops, so I can try it again in future. I have question, what do you think is the best pressure settings for painting revell 30 ??? How about thinnering?? 3:2?? 1:1??

@@KoKo-kokolas as you are using the enamel, white spirit is the thinner to use, the others are for acrylic so are not going to work( I know from mixing them up and having a devil of a job cleaning up the mess!). As for air pressure, I go with about twenty psi, but I’m no expert and much depends on your location and weather conditions.

😀

It is good quality/ parts fit very well. I think it would be good to learn /show mounting of front chassis - this part is hard to set correctly. Also if you will use revell 30 paint you will have some issues worth to show

Hi, yeah it is Strawberry kit, it is super quality.

Thank you for your reply.I shall order it. All the best.

i am amateur music maker ;)

I think RGB look nice at evening when 2 rams together , in dual i see ugly hole between rams ;) But seriously: ,Intel says "Intel® processors come in four different types: Single Channel, Dual Channel, Triple Channel, and Flex Mode. Maximum supported memory speed may be lower when populating multiple DIMMs per channel on products that support multiple memory channels." I am using 2x single controller for each memory , by using dual it will make me using only 1x controller so speed may be lowered. In this video you can see fps change in higher resolutions, th-cam.com/video/Xdb9SSv0w9E/w-d-xo.html , it is easy too see in 1080 p most games shows 20 fps more in dual channel , in 1440p it is only 3-4 fps only, and if you will check youtube you will find video with 4 k resolution , and it clearly shows +2 fps in most games for single channels. If you are really interested, i can run cinebench r23/ r24 tests , or any other, i think testing old games -like 3 or 4 or more years- is without sense, these were prepared for years earlier . New games which will come in this year should use new technologies ,maybe then it will be more clear about using dual in highend games . Synthetical tests or old game sare not showing true idea . If you wish , i can test software whichever you want to .

Yea. With its price it should be more detailed

Thank You!

Thank you for this info. I could not find any info about colors or painting.

Okay. 😀

Agreed! BAF!

Hah. Thanks for good advice and taking care about my fingers. I use it because it is sharp enough to do precision cuts. I know it looks horrible, but I am trying to not cut myself . ;)

I agree, at least use single sided ones, less chance of a nasty cut.

Thank you. I will assembly next one in about month- Q class

Thats true. I spent whole day scratching and it was not enough

Have fun with it!

Masking failed. Yep

Thanks . I am glad that people like you also assembling model kits. Yea it was horrible to glue it. I will do q.class soon.

And I will do video. Have you heard about addons to this kits

?

@@KoKo-kokolas I gave up on trying to glue the kit etch parts and found it easier to replace them with thin brass rod soldered together. Much stronger as well.

There are no aftermarket sets that I am aware of so unfortunately, any enhancement of the kit has to be scratch built. Probably the greatest improvement you can make to the kit is to rig the tail surfaces. I use 0.1mm nickel silver wire from Albion Alloys.

Heyhey. It is nice to hear that You are also building kits.

I am amateur/ i saw you r pro. I m glad that you like mine job.

@@KoKo-kokolas thank you! I would say that I am an enthusiastic amateur rather than a pro! I just enjoy putting kits together and finding ways to make them look like I'd want them to look when finished.

Волнообразная линия голубого цвета по бокам фюзеляжа, тоже круто???!!! Не говоря о других крутостях!!!

Or breakfast table..

Yes, this mask is like gum

First time I have use this one. It is very good for masking tanks or air .

I was very impressed with your build got some tips from it keep them coming 😀

Scalpel is blunt ;)

New bios version support all 13 series

Hey , i have Mount on front panel inside case. There was not enough space on top ,also out of case was hard to set up. In hard stress my cpu 12600k is 45celcius on max cooler power

@@KoKo-kokolas how did you mount fans? Pull in air or out?

@@sefaaltntas8240 air out all coolers, i have 2x120 on top,1 x120 back top,3x120 on aio , and 2x 120 at front under front case cover, and only 1 cooler air in is this builded in psu which lay at bottom of case

I forgot.... 2x 20 mm on memory ram, 1x20mm on nvme pcie

@@KoKo-kokolas why all them air out? I am planning that 3x120 on aio air in. 3x120 on top air out and 1x140 on back air out.. I saw that on other videos on youtube

How many DDR 5 and DDR 4 slots are there on asus prime z690a.

@@HarvinderSingh-yy8th You cant get both on the same motherboard! This mobo is DDR5 ONLY!

Hey, i am using it untill now. My Mouse is clean and not destroyed at all. It is also strong pad,many times i scratched it and there no sign.

Me too, how is it going? Many ppl said it is very noisy and destroy mouse feet

@@HOHENHEINpt Little to no noise, and it doesn't seem to cause any wear on my mouse feet. I have a razer mamba and it is not scratched at all. Really good size with a nice feel. Makes you feel precise and accurate, giving you the ability to play in control and precise, but the hardness giving it that kick it needs when you need to flick. My flicks are fast and precise with this mousepad, and it feels perfect fit for my 800 dpi space. I should mention however one thing I noticed is that it collects a lot of hair lol.. or well, its just black and itll never really be hairless with my cats running around. But those hairs make it feel really rigid and just annoying to play with. Wipe your mousepad down every once and awhile and you should be good.

@@grayson853 ty só much for ur answer and tips bud. I have a basilisk ultimade, glad to know it wont dmg him. I googled about, everyone said that i would need to replace mouse feet everyone month... wtf lol. Tks

HEY, after this whole time which i was using this pad , i can say it is very noisy , but it do not destroy mouse, it is allways cold and do not make your hands sweat. I am using it very often and sometimes it gets dirty with food, drinks, glue. i can say its quality is very good, there is no scratches at all.

Yes.in games/videocreators- You should have 55-65 celcius maximum.you need buy crynoaut thermal grizzly paste ,on original msi paste i had 78 celcius

@@KoKo-kokolas я купил grizli и noctua какой лучше приминть?

@@razmikkazaryan4439 Noctua h1 6w/mK cryonaut 12,6 w/mK, so winner is Thermal

Hey friend. If you motherboard is freshly bought u should buy the best memory kit you wish to have. This motherboard runs well with all memory. Remember that this motherboard start 4 minutes at first run. Do not reset or turn it off with your new memory.if you have problem with start this motherboard, plz write me.

And ,,, there is 60000 cl 36 on market right now. Consider to buy those.

6000 sry

@@KoKo-kokolas Thanks new ddr5 ram is coming to the market right now prices are insane if i go for 6000 and cl38 but better to wait and see if prices will drop since i have another desktop but this motherboard cost me 130€ brand new so i grab it.