วีดีโอ

Je n'ai pas de balles plomb en gros calibre juste du 22 pour du Tesro et Unique et j'utilise le Ed's Red :-)

Les burettes à huile de l'armée ne réagissent pas à l'acétone. :-)

Et puis, un pétard, il faut que ça ressemble à un pétard !!!

Looks like that !! :-)

Yes I have that screw that feeds at the back.

Thanks

Sur internet, vous recherchez tables Vectan par exemple ! www.google.com/search?client=firefox-b-d&q=geerbrandt+halo

La mienne n'est pas neuve et a appartenu à un champion Suisse, ca va entre 2K et 10k, 6-7k est un bon chiffre..

Si tu as besoin d'un truc n'hésites pas a me demander !! Bon rechargement ! Fabrice

@@reloading_and_gun_channel Avec plaisir ! je viens de recevoir aujourd'hui les outils LEE ainsi que les ogives puis les amorces . Encore merci ! je te ferais signe lorsque je mis met 🥰

I got really short hands and it's not natural for me to ride the safety, makes my whole right hand higher. I use S size gloves on the bike :-)

Absolument, je taille du S en gant de moto et mettre le pouce au dessus de la sécurité comme il se doit me fait monter toute ma main droite.

A star is born !

Thank you

France

Only ever slightly it's mechanical, the trigger has to lift one more part to push assmall mushroom and it's spring, Little gain nonetheless can't give you precise figures !!

I buy them from TLGS in France

Bonjour, ce n'est pas mon arma zeca, je demande et je reviens vers toi !

Thanks 👍

Anything American is a beauty !!

@@reloading_and_gun_channel Amen to that sir!

Hi, I only have problems with that particular pistol, the others go fine with the same reloading sequence (the other meaning all the guns in 9mm I have been reloading since 2012 with the exception of my Ronin), I cannot make the list here as it is too long. The gun is fine, same for the ammo, problem is the proof test procedure standard that differs. CIP in Europe and something else in the USA (Maybe SAAMI). Does not make it a bad gun, just different chamber tolerances. I could also have done a video on the chambers, and that of the SA is less wide. I don't run factory ammo as powder is quicker. I find my ammo more accurate. That being said I keep ammo aside just for my RONIN;-) here is some Wiki data, hope it helps : Proof test differences Under C.I.P. proof test standards a drilled case is used and the piezo measuring device (transducer) is positioned at a predefined distance from the breech face when the length of the cartridge case permits that, including limits. When the length of the cartridge case is too short or too long, pressure measurement will take place at a cartridge specific location defined at a shorter or longer distance from the breech face and depending on the dimensions of the case. Under SAAMI proof test procedures, for bottlenecked cases the centre of the transducer is located 0.175 inches (4.4 mm) behind the shoulder of the case for large diameter (0.250 inches (6.4 mm)) transducers and 0.150 inches (3.8 mm) for small diameter (0.194 inches (4.9 mm)) transducers. For straight cases the centre of the transducer is located one-half of the transducer diameter plus 0.005 inches (0.13 mm) behind the base of the seated bullet. Small transducers are used when the case diameter at the point of measurement is less than 0.35 inches (8.9 mm). The difference in the location of the pressure measurement gives different results than the SAAMI standard.

It's gotta be the best 👌;-)

@@reloading_and_gun_channel Close to the best, I would think. I don't know how many revisions they had, but I do know there's a 14-4. Typically, as time goes along, companies "cost-reduce" their products by using different materials and processes and S&W is no exception. You have not only one of the best S&W models (the 14), but likely one that was made when the level of craftsmanship at the factory was very high.