วีดีโอ

Nice one, bro ✌🏻🏴󠁧󠁢󠁷󠁬󠁳󠁿

I have a 2011 Sportsman 550 Touring. Exit tube on the fuel pump was cracked at the base and I had no idea how to get the unit out past the frame. Just that little sideways shove on the tank was the ticket. THANK-YOU!

Nice tip about inspecting through the oil fill hole 👍🏼

Can these be cut down? Not sure if it’ll effect anything being carbon fiber

Ran Bridgestones for years. All around great tires

What’s the bar bend

I wrecked my yfz snapped the frame and bent my bars I bent them back as best as I could drive it for a while an it felt like the clutch was slipping so I took out the basket Ann plates the basket was worn down real bad so I replaced it an the plates and it was still slipping and then it clicked that the bars was bent on the clutch side and it probably just needed a cable and bars I spent about 700 on parts just for it to be the bars bent

Congrats DUDE! Rebuildin Paradise! Yeeeeah!

Is it still working well? thinking about doing something like this.

Thanks for the video but i have never had a problem with Tusk products its been nothing But great

What rear tire do you use to accompany the front Bridgestone X31?🔥

Nice! I messed with my tubliss all last night and couldn’t get it to seal. Gonna take it all apart and try the slime method.

ahh! ahh god damnit! lol that was hilarious to hear at around 1:40

I want to ride my bike up that thing, and then come back with RC cars haha. I wish i had a formation like that in my backyard

Great info. Appreciate it

hi is there any such problem in ktm sxf 350 2012 cairoli

Ah wish you'd have shown how to remove the extension from the socket as I've got mine dropped down there and can't clear the frame to get it out. Will try the flathead screwdriver method then!

All balls might have a reputation for being cheap, but $25 is kinda a lot for 0.7 ounces of rubber and metal

Can you make a video for the best budget/beginner dirtbikes for different heights/weights?

What size are the clamps?

I appreciate the insight a lot My quad has those Chinese 200cc engines, and it won't shift into first while I'm in idle unless it's already rolling or if I give it a ton of throttle, I don't know why the clutch won't disengage the engine, it's brand new!

Heavy duty is the way to go. The foolishness about extra heat is nonsense. My kenda weighed 3lb the one I removed was 1lb 1oz. Zero difference

Thanks , very helpful . Took me 2-3 hrs . My bike had a cracked fuel pump from factory . Polaris still hasn't the 23-24 sportsmans. 6 months later .

K but.... For us idiots, how do you snap that masterlink clip into place, it was the only thing I wanted to see in this video... A good how-to is start to ready-to-ride finish.

Here comemting just to support and saying thanks for the oppinion man.

How about in the mud?

can you tell why you changed the pump ? xp 1000 touring ...when is hot...is not running smooth on idle and seems too loose power if i drive slow..

Hello, good evening, I have a Polaris 450 ATV from the 2000s, I removed the silencer and put a direct muffler on it, so I don't have any problems riding it like this.

How do I research the correct sprocket size and a good brand? I have a 2017 Husqy 300TE

Did you put bar risers on your bike? I have the same bike my bars feel low.

Hell yeah dude you explain it super well

I see alot of Garmin Etrex 10 on marketplace, they a good buy or should i get the etrex 22?

That tread patterns looks identical to the Michelin Cross Competition and also the Pirelli Scorpion MX 32 Stadium.

Sick! 😮

How many hours on this engine

Watched this video. Now my tire is popped

Just curious, I know that 80 weight oil is commonly used for the transmissions on these two strokes, such as Bel-Ray, Motul 80w etc. However I have wondered for some time why ATF fluid would not be just as good if not better? I can just assume that possibly the clutch simply wouldn't works as well? Curious of your thoughts on this.

I really agree with you on this one! Especially for adventure riding when you start to feel far from home its nice knowing your bike wont let you down. My old Yamaha would still run even without the battery installed

I had 3 of these and they all developed base knobby cracks way too soon. I went to the Dunlop AT81EX (gummy) and this tire has not cracked and really lasts a long time. Saving $25 on a tire isn't saving if you have to change it 3x as often.

Ktms are rubbish, good design.... NOT

Ya but what pressure you running bro ?

The issue for me is the plate doesnt even push out... how do i fix this??

Excellent explanation! Going to check for these now...

also, why is Maxima Extra not included in this video, it's meant to be better again. it's definitely more expensive anyways

Any tips for getting the fuel gauge to show up on the cluster my 21 sportsman’s hasn’t shown up since day 1

Oof

i am very glad you asked i do have a question my front rim is 19 inch(110/80/-R19") any where i go they are talking or offering about 21 inch front tire and hope you have a recommendation for me

cwould you recommend using the ve33 in front? my front rim is 19 inch ?

At what time should the wheel be changed?, thank you!

I want to do the same thing, do you have issues overloading the wires or the fuse blowing up when you have the Fan and the lights on at the same time ?