วีดีโอ

Hiya, like every scheme it isn’t perfect but on a whole it’s spot on and I enjoy using it. Sherwin-Williams are continually developing it and bringing out new products. Their pf345 primer is excellent and fast and their waterbase dries quickly 👍

Hi Brian thanks for reply.. how are the colour matches treating you iv seen lads going edge to edge anytimes.. also that lovely masterflow booth is doing a lovely job, smoke test was great on the test run.. that brings me to my next question 😂. How could I get a little quote on paint scheme and pain booth. I understand it was originally more for smart repairs but it looks like it's in full swing now 😂👍 I'm just trying to get myself set up Bern doing as much research as I possibly can before taking the plunge 😅 thank you ever so much Brian loyal subscriber here love every video I appreciate how much time it takes to record everything

Hiya, I have the same concerns as you and I make my customers very aware of this and what problems it can create. However this car did not have a radar in that area but if it had and the customer still wanted it done then I would have had it recalibrated at my local ADAS centre. This would have been an additional cost. I have tried to ask the manufactures to allow me to do a weld, so we can test the results but no one came back to me. It leaves me with mixed feelings.

@@damageundoneltd, mobile guys don't have access to centers like you do. Besides, basic touch up is easier on the body! Have a good weekend!

Thanks. It is a long video but hopefully interesting at the same time 👍

Providing your board is PUR, i cannot see why not

This is what I found about the product it’s Polyester Recycled Polyester Nylon Polyamide Recycled Nylon Spandex Lycra Modal. So not sure if this is same to pur?

"ASA Polymer outer skin" refers to a protective layer made from Acrylonitrile Styrene Acrylate (ASA) plastic do you think this can be welded material?

Totally different material. PUR is polyurethane. You need to find the correct plastic to repair the board, they can’t be mixed

@@damageundoneltd great thank you so it looks like they make ASA glue stick. Not not available in my area. Thanks again for the video going to try reach out to manufacture

Hiya, My primary smart repairs base gun is the Sagola mini xtreme 1.2 aqua cap. If I’m doing larger areas I’ll swap it for the 3M performance spray gun with a fine nozzle 1.2 or the Meiji finer core 1.3 (great gun) Clear, used to be the Sagola 4600 xtreme 1.2xl DVR cap but that got knocked off top spot by the 1.3mm Sata 5500 CC, absolutely brilliant

As you know i do smart repairs. Looking for 1 gun. Do you think the 3 m performance gun would do the trick for me. Base coat clear coats..? Your thoughts mate Merry Xmas to you and family.....

I’m not sure it is possible but let me know

Cheers, I’m glad you liked it 👍

It certainly is jb. Ps I had a little package arrive yesterday, that I’ll share with you all in the coming week or two 🤫

Ah nice mate I hope you like it🤐👍

Thank you for watching and commenting 👍

I’m not sure

🤣 it would be wasted in my shop All the tinters are held in the machine and topped up when they run low

Ah it's just that the other one I saw was the one that Gabe (Motivated Painters) had he uses PPG and his was a carrousel type setup holding around 15 tinters so he had to load them manually onto the machine for each mix, for some reason he no longer has it.

@JohnWD40TC02 he prob doesn’t have it because it’s was too slow. PPG now have the moonwalk and that’s fully automated, quite a different look to it too

Hi, I don’t know who the original manufacturer is but I do know that these are sold by Farecla to compliment their G360 polish

@damageundoneltd Thanks, it seems to be: FARECLA G-MOP 6 GMC650 :)

Yes they have a selection of brands under the Sherwin-Williams brand

No, this is the colad #snaplid cup system and adapter

Yeah, it was a shame and we don’t know why that was.

There will be more content coming

Nice

It is best to ask your local Sherwin-Williams/octoral paint supplier

You’re very welcome and thank you for letting me know that it helped 👍

Hiya, you’ll find that the coarse is much easier to sand. I don’t have any issues with sanding the fine colad putty but I only is it to skim pinholes or fill in paint chips

Hi Jb The Skeletime system is fantastic and I swear by them as a backing pad and interface kit. Unfortunately, they have yet to find a decent uk distributor, so it’s online purchases and shipping from Italy only. If you contact them and quote “DAMAGE UNDONE” they were doing a little deal www.skeletime.com/products/

Thanks for the reply Wayne, it's a shame they don't have a uk distributor as I think this product would be quite popular, yeah they are more expensive but it's a unique product so there must have been more R&D expenses and better quality. Thanks for the link and the code, I'm determined to get the kit asap but I'm having some health issues to sort out and have the docs yet again tomorrow so it's always on my mind.

Hi To hot weld PUR you need an airless welder and as far as I’m aware there isn’t a welding rod with that mix currently available. You can cold weld or chemical weld it and for that there are loads of 2k pu adhesive options available, you will just need to google those

Hi, I have seen black pur but majority of the times it yellow. There should be a plastic identification stamp on it. Have a look for that, if you can’t see it then do a test weld or if you want to cold/chemical weld it then just read the data sheet to check it’ll work on all plastics

@@damageundoneltd no plastic type identification on the back side, has some date codes but that’s it. Most early 70-80’s semi flexible plastics are polyurethane, and I’m not surprised that Mercedes you show in the video is using this process still. I purchased this kit to repair the damaged cracked air dam, but I contacted the mfg asked if the product would work they answered yes, Vicrez vzr101 Auto Body Plastic Bumper Repair Kit. Going to scuff up a spot on the backside of the air dam today and attempt a surface adhesion test before grinding back the cracks and attempting the repairs, wish me luck!

@blkcoupequattro ok cool, good luck I had to fix this today instagram.com/reel/DADfuV7Mgcv/?igsh=MWJtMnBsY21jbTBkbg==

Ok, I’m sorry to hear this. I believe it is a great spraygun but it does depend on which one you’ve got. Maybe you could share this with me and what the issues you’re getting are and then I could help you. Alternatively if you are in the uk I can ask the uk md and tech to give you a call. He is very helpful

I’ve just listened back to it and I don’t think it is but I will be more aware of your concern on the next one 👍

Like with all these products it isn’t suited to all plastics or plastic repairs but it worked well on this one

You are right there is quite a difference in prices and in the past I have used both the fast mover and Proxl but not the upol. It could be very possible that some of these adhesives come from the same manufacturer but unless I have all 4 side by side and I can check lot numbers etc it very difficult to tell. I am always open to testing product side by side to see how they perform, if they differ and how

If it was a real repair then I’d have spent a little longer on it and it would have looked better but this was a test to see how well it performed. I honestly did not expect it to hold because we had not cleaned the area thoroughly and I wouldn’t say that I keyed it that well either. So yip I was impressed

That’s great but I’m not showing you how to unlock the doors, I’m showing you how to remove the door handle 👍

Thanks for the comment and question. Here is a link to find your local kovax distributor www.kovax.eu/our-partners/find-a-dealer

Thank you

Yes, you can. I have to wear glasses and have not issues

Yes you’re correct 👍

Thanks, I’m glad it helped you

@@damageundoneltd Sure did! Knowing where the clips are is 90% of the battle.

Not sure which you mean?

Please Contact master flo masterflo-uk.com/

Most jobs I use around 2 bar

Hiya Here are all my details www.linktr.ee/damageundone