วีดีโอ

Much appreciated

Thanks buddy

Thanks, I had exactly same issue after changing spark plugs and removing air box...

👌

Thank you for the visual! I was attempting a tripod pull, your bipod works best, and upon seeing the use of a socket for a base, that helped me eliminate a VERY ERRONEOUS step I was taking! Tried it, and just as I turned, my "made in China" tool snapped. Guess I will be going to autozone and just rent one if available!

15:00 DO NOT TIGHTEN TO 35. I broke the housing for the pump. Straight up cracked the metal.

Thank you very much 🙏

Thank you that’s all I gotta say very descriptive 🫡🤘

poor vid. You need to clearly show how to get to the pins without damaging the panel. Waste of time to watch.

Thank you for the video showing the mistakes and the solution. I haven't taken mine apart yet but I imagine cold or broken solder joints could be a problem as well as these vehicles age.

Where can I find those screws. What are the exact specs. Mine are missing so I need both of those screw you removed

Thanks!!

My cruise control works maybe 50% of the time, it’s weird

Great content / voice overs.

Ugh I broke those damn yellow clips on my 12 liberty. Anyone know what they’re called? Looking to get a replacement

I love these cars so much ❤

That cap on the bottom of the reservoir is there to help you purge out all the old fluid from the rack.

I got all the way up until 9:21 the bolt is stuck and refuses to come off i’ve been trying to get at it but still no luck

By the looks of it, you could have just added the cruise module and radio control module to the other wheel once you took them off.

Good explanation! 👌🏽

thank you my friend for the great video, God bless you.

Excellent video. Thank You.

Thanks

My curtacy lights don't come on when I open doors does a 2003 liberty sport have them

Excellent. You explain perfectly. Congratulations

This video got me through the project. My sons has the factory bumper bar which took me forever to figure out. Turned out two screws on the insides of the bar and you can pull it back. From there everything else was guided by your video. Thank you much!

Great video. I cannot find the link to the pulley replacement though. Could I get the link? Thanks, man.

I saw it brought her up but still aren’t sure, is there a way to have a bull bar that’s mounted to the tow hook spot and somehow add tow hooks as well. Mainly, is it possible to drill new holes for tow hooks near the stock spot without hurting the bumper integrity.

What is the magical "Calculation" you are talking about when you mention the wire length??

The diagram for the belt is on the front of the jeep. All the writing across the black bar right on the front has the belt information plus spark plug gap info ect

Question. If I take this from a jeep that I get the key fobs too would that work instead of buying new keys and programming it?

Did you replace the hoses out of necessity or as a precaution? Great video by the way ❤

Thank you! I have no clue why my steering wheel is upside down but I’m pretty sure I can flip it myself now.

What light was that?

Awesome video.

Great video. Thank you. When you say the steering wheel is keyed do you mean it can't be rotated to the right or left slightly? I just had my daughter KJ get a wheel alignment and now the steering wheel is off centre. I was going to remove the wheel and rotate it slightly but this may now not be possible. Thanks

Great video! For the Reese hitch, did you have to remove those crossbars that connect the rear of the gas tank skid plate to the frame? I have an OEM hitch that’s missing the replacement crossbars that connect directly to it, I’m wondering if you had to get rid of them for the Reese hitch and if you’ve had any issues/concerns operating without them?

Great help thanks for the video 👍

Can I put a tilt steering wheel on my 03 jeep grand Cherokee Laredo?

About to start this repair. Thanks for posting it. I didn't have to remove the belt or the pulley from the original pump. My daughter went ahead and kept driving the jeep while it was making a "screaming" noise until the steering went out. The belt, pulley, and pump shaft are somewhere on the roadside. There's just a worn out hole in the front of the PS pump 😞

Great video. Here are a few different things I did that helped me out changing mine . I was able to remove the two bolts behind the headlight without removing the grill or headlight. They can be accessed from the engine compartment with a deep socket on a ratchet for one and a long extension with a short socket on a universal drive for the the forward one. Also I removed my oil filter to give more room to wrench on the connections with the hose. I would also recommend pulling the pulley off while the pump is still in the car as it makes it easier to reach the bolts. I put my pulley on the new pump out of the car, but I'm betting you could install the pulley once the new pump is in place to keep the bolts easy to get at as well. With the pulley out of the way you can also reach both hose connections while the pump is installed as well.

Thanks a lot man. Cracked hose in two spots. 6 dollars worth of hose and 20 minutes later I now have working cruise control.

you actually made this job seem easier than anyone I looked at thanks

Thanks for sharing! We're going to tackle this on one of our WJs.

Hello! I enjoyed wtching your video! Did you get the tow hooks from another Jeep Liberty or they came from a different vehicle? Have you see them online as well? Please let me know.- Thank you in advance

Great video. My only question why not remove the pulley while the pump is still on the car.

Nice job!!! Going to buy some off eBay and put them on!! Thanks

I wouldn't have removed that hose. Just get a new one and run it straight

Are you a carpenter by any chance hahaha just kidding , grate video.

Thank you so much for the video!👍🏼👍🏼