วีดีโอ

"He knows a lot about the cutting" WTF

Take the heat shield off convertor. Cut a small square 3 sided hole in convertor, bend metal back. Take a hammer drill with a chisel adapter, break all the honeycomb out, weld the square shut. Done. This will keep piping all in one piece and much safer.

Why not take out all 3???!!!??? Whatever clogged the 1st one will eventually clog the 2nd and 3rd. Just be straightforward and install a whole straight pipe with a resonator 🤷🏾

So would it fkk up the car if you do cat delete 🤔

Are you khazarian?

Wtf did I just see

This is trash lol literally worth a few hundred dollars

Where do u Work so I know not to go there

Lol. I couldn't figure out why the manifold still wouldn't loosen. Thanks to you I found the bolts on the very back, and dropped my 12mm socket into the depths... 😬 Going to call it a night and revisit it tomorrow. 😁

Jumping in again to say that the plug manufactures don't recommend anti-seize due to the risk of over-torqueing them. The anti-seize lubricates them a little too much! That being said, I use it and just be careful not to over-torque them.

Just jumping in to add that you only need to remove the covers on 2 and 3 to get atthe bolts... and the Hyundai H.

06:51 That's what she said!

I do like the custom red paint in step one. Quite the pain in the ass to remove the engine cover when we have to get to work on the machine, but very impressive detailing.

He probably owns the shop, and they weren't gonna say no. But he's likley gonna see spots for a long time. What a douche bag..LMFDO 😂😂

He would have been better off with duct tape 😂

Weld looks like hammered dog 💩

This is the coolest car video I ever seen

this guy gets the internets idiot award of the day. 👌🤣😂

do you still have this car ? :) thanks for the tuto btw :)

You have been nominated for the next Darwin award!

Sounds Like a Piece of Crap!!! Grow Up!!!

I know this vid is old. But how much did you torque the bolts. Im afraid of breaking the bolt

When your eyes are burnt, don't tell us why.

🤡🤡🤡

How the hell this guys survived this long?? No straps on the pipe they are cutting No face shield Using wrong tool No welding mask shield eye protection No right clothes Oil fumes and throwing sparks everywhere Good luck guys

you didn’t need to cut it. it bolts on and off

Holding a grinder like that puts a target on your five head when it decides to kick back on you. Go ahead and take the “No accidents for_days” sign down when you get back to work.

12:09 your eyes 😂😂

What kind of tools did you use?

I have a 2002 4 cylinder with a muffler delete. I’ve been trying to find a body kit for the alero but I dont know where to get it and was wondering if you uave found any yet?

Yess

Face shield buddy

Did you have to add any extra hangers to hold the exhaust so it wouldnt drag? I want to do the same to mine but i can only see one hanger in the back were the muffler was, so im not sure if i cut it and have it come out the side, if it will drag.

The _"I literally have no idea what im doing"_ was surprisingly reassuring since after seeing a fellow practitioner of the bruteforce method it sparked great confidence in me after realizing i wanted a catdelete this morning. The go with the flow figure it out along the way is severely underappreciated and has always served me well. most of the time. Sorta. 80% of the time it worked every time so the odds are in my favor imma just go for it

Why didn't he just unbolt it from the joint ? 😓

🏎

You need an amp to get the full potential out of that sound system

After not posting in a “long minute”, what compelled you to do a video with cheap speakers and a Nissan whatever it is..?

Would they fit in a 2016 c63 s amg?

I hope you got welders flash for being that dumb too look at the weld like that with no shield you sir don’t have a brain grown up

so why didnt u just turn it on at the end of the video?

Bought a 98 accord with headers and a cold air. Needs a tune but I’m like…. May as well slap an exhaust on it hahaha

Protect your eyes FFS!

You should’ve done to catch elites

How did you remove the V6 and Hyundai logo on the plastic cover?

Working with a butter knife 😂

Tired of replacing cats! I believe this is what I want done. Take off cats, straight pipe and leave the rest on. I can’t find any other videos.

Uhmm 99 there's Def a downstream 02. That started in 96.... combined with you calling a valve cover gasket a head gasket... and stating you have 4in exhaust going into a stock cast I think it would benefit for us all to know what shop you work at so we don't go there

Dam this video made me cringe, first of all break every power tool you have, sencond never touch a welder again, third please find a different career like professional gaming or something 😂😅

Bro you don’t supposed to make sparks under your fuel tank