- 59
- 155 578
Tommy Bowler
เข้าร่วมเมื่อ 24 ธ.ค. 2013
I am uploading the pictures of models I build here, rolled up into videos. Some are constructed and painted quicker than others, so gaps between videos will vary. Enjoy and leave a thumbs up if you like something 🙂
H.M.S. Snake - Part 9
All the ratlines are tied. Looking at the next step, I found a problem: I don't have Sheet 4 of the plans to complete the standing rigging. I have emailed the manufacturer, and hopefully, I can get a copy to finish the model off.
มุมมอง: 291
วีดีโอ
H.M.S. Snake - Part 8
มุมมอง 3385 หลายเดือนก่อน
The rigging is started. Staying motivated tieing ratlines is proving hard.
H.M.S. Snake - Part 7
มุมมอง 22111 หลายเดือนก่อน
Onwards and upwards, as they say. In this video I make the masts, bowsprit, and anchors.
H.M.S. Snake - Part 6
มุมมอง 465ปีที่แล้ว
More hull and deck work. I fitted the carronades. The kit instructions said to use 0.5mm thread for them, but I didn't think it looked correct, so I got some 1mm thread and used that instead. I was 7 belaying pins short, so I had to order some more.
Tamiya Electric Handy Drill
มุมมอง 198ปีที่แล้ว
A simple build that will be very useful. Luckily, I had two spare rechargeable AA batteries to run it.
H.M.S. Snake - Part 5
มุมมอง 252ปีที่แล้ว
I'm starting to get the deck fittings in place. She's starting to look much better now 🙂
H.M.S. Snake - Part 4
มุมมอง 338ปีที่แล้ว
It's my first time putting copper tiles on a hull and underestimated just how long it would take. Like a fool, I followed the instructions and mounted the rudder before putting the copper tiles on it. It just made it harder to do. Every days a school day, as they say 🙂
H.M.S. Snake - Part 3
มุมมอง 313ปีที่แล้ว
First is filling and sanding the hull, then adding the wale. Next, the inner bulwark was planked, and the openings trimmed and filed to shape. Finally, the lower quadrant sills were added, and the bulwark was painted red. I used Admiralty Paints Red Ochre from the set I bought with the model.
H.M.S. Snake - Part 2
มุมมอง 432ปีที่แล้ว
I sanded down the first planking and then second planked the hull. I used pins to hold the lower planks in place while the glue dried as the copper tiles will hide the pin holes. I made some DIY clamps from scrap wood to hold the upper planks to keep them clean. Next will be a lot of sanding, filling, and shaping to finish off the hull.
H.M.S. Snake - Part 1
มุมมอง 714ปีที่แล้ว
The first planking is completed. A couple of days sanding the hull to a good shape next before carrying on.
H.M.S. Snake - Unboxing
มุมมอง 574ปีที่แล้ว
From Caldercraft Nelsons Navy range. An 18 carronade sloop of war built in 1797. The kit is 1/64 scale, measuring 910mm long, 610mm high, and 350mm wide. I bought the optional paint set to ensure I got the correct colours.
H.M.S. Tenby - The Build
มุมมอง 692ปีที่แล้ว
Building the Atlantic Models kit of HMS Tenby. Sold as her sister ship HMS Torquay by Atlantic Models. She's a Type 12 A/S Frigate in 1/350 Scale.
H.M.S. Tenby - The Kit
มุมมอง 247ปีที่แล้ว
Built from an Atlantic Models Kit of her sister ship HMS Torquay, a Type 12 A/S Frigate in 1/350 Scale
Agora Bismarck - Partworks Upgrade
มุมมอง 2.2K2 ปีที่แล้ว
I bought a flag set and an Information Plaque from Partworks Upgrades.
Agora Bismarck - Testing the Fifth Circuit Board
มุมมอง 18K2 ปีที่แล้ว
Agora Bismarck - Testing the Fifth Circuit Board
Agora Bismarck - Testing everything at pack 100
มุมมอง 43K2 ปีที่แล้ว
Agora Bismarck - Testing everything at pack 100
SICK!!!!!
Nice model - planning to get it
Looking really good. I'm some way behind you . I hope to finish the inner bullwarks today and final sanding . It's my first build. New subscriber
I like the Jotika kits, I’ve already built a HMBV Granado, I’ve been wanting to buy a Snake for a long time. It's a pity that Jotika stopped making new ships.
Hi Tommy! I bought Snake online and am waiting for delivery. I really like your ship, I think you need to make at least two lifeboats, they can be bought separately. I even plan to supply two ore three lifeboats. They make very good 1/64 boats in Russia, but I don’t know if they are available to you.
Part2😅
Fantastic model, terrible music
Beautiful work
Nice model. However, the White Ensign is never flown from the jackstaff on the bow. At sea, nothing would be raised there. Secured alongside, the Union Jack would be flying from the jackstaff.
Very nice work Tommy. Subscribed.
where did you get this and how long is the ship in cms please
www.scalemates.com/kits/flyhawk-model-fh1110-hms-ajax-1939--1343454
@24cm long
Bellissimo 👍👍👍👍👍
Nice job it’s not an easy kit to build 👍🏻
Que marca hace estos modelos ?? Maravillosos
Haben sich die E-Messgeräte wirklich 360 grad gedreht
Ciao,,la tecca in quale numero si trova
nice kit
How did you put properell, motors , streering weel at Bismarck ship
Gold was a bit iffy at first but you really saved it by the end Shield looks great and the shine is neat Would suggest more weathering just cause I don’t like clean room aesthetics but thats just me And some more detail on the eyes, vents, little things but that’s really it I love the skulls
I'm not that good at weathering and I didn't want to mess it up. I thought about some more shading but it's big and doesn't look the same as a small figure.
@@tommybowler1700 Understandable Overall, what you did do came out great
Nice work! shade it..
On the cards lol
If it's already prepainted and pretty much assembly not difficult at all. Where's the skill at?
Alla fine del modello nave,c'è la possibilità di avere la sua teca per conservarlo? Fatemi sapere grazie
I really enjoyed doing the rigging on this. It was time consuming and frustrating at times but I really liked how they laid it out in the instructions so it wasn’t overwhelming to do 😊
I loved that build! Looks wonderful!
great video ,music awful .😢
this is fucking awesome
I wish you would have turned that aggravating music off while you were going through the sounds, otherwise very nice.
good ship!!!
Fantasticaaaaaaaa
Do you by chance have any gaps between the hull and the deck? I didn't see any on your model but on mine I have a significant gap in which the aft superstructure doesn't sit correctly on the hull.
Yes, but not so bad once the strengtheners were added.
When I did a test of the Turret it worked fine. When I hooked it up to the main box and ran a test on everything it gets stuck now and points either to starboard or port when I hit the S1 button to turn it off. I have checked to see if anything may be obstructing it and I don't see anything. I also took it apart from the deck and put it back in place and it still doesn't work properly. Any ideas what may be causing this?
I can feel you buddy, mine also has problems. The A main gun turret isn't responding as its supposed to. It only turns on 1 side and gets stuck there. Gun barrels are not elevating or move in and out. You are not the only one that faces problems. I also have to idea why the electronics have problems but i assume its from the factory since all connections are right. Quite sad for such a model to have problems such as.
@@chrismots6479 mine sort of work now. The 3rd turret does not go up or down nor back and forth. I'm leaving it the way it is because I'm tired of taking them apart and putting them back together.
@@tokyo-ghoul-6712 glad it works. Hope mine will fix itself somehow. Maybe when the final control board comes everything will work as its supposed to since the control boards that are used to test the functional parts are temporary.
I found that if the screws were even the slightest bit too tight it wouldn't work. Some things worked straight away and some things needed loads of adjustment.
Impressive!
It is a great works👍
Muy buen modelo
very expensive toy!!
Bonjours ou commander la maquette merci
The music in this video is overbearing and out of place relative the nature of the content.
What online shop di you buy it through?
www.agoramodels.com/bismarck/
Beri dimana itu pak?
www.agoramodels.com/bismarck/?gclid=Cj0KCQjwvqeUBhCBARIsAOdt45ZDXGzDt-sbCIILRaVETDbVVyWwYYV2eHebSh2JtBAGJSGG6bSvVF0aAhyaEALw_wcB
Beri dimana itu pak?
Wow !! Beautiful model, love it
Beautiful model !! Lots of work and beautiful done. I assume the main turrets barrels were meant to elevate, yes ?? Can’t wait to see her finished
They do. This test was just a simple test.
Very impressive. Now all it needs is a model of Admiral Lutjens making bad decisions on the bridge. A) not to finish off the PofW; and B) sail to France instead of Norway after the battle. ☮
Nice battle Ship You Got There Dude
How was That Possible
*Very nice Bismarck! You did a great job! Thank you for the great video!~~~^^*
Ciao dove l hai comprata? Quanto costa?
www.agoramodels.com/bismarck/?gclid=Cj0KCQjwyMiTBhDKARIsAAJ-9Vty5HrucZ4LsvpNk5qd1etFSL-43cdpGVTnWIfaZlTMBBXqjiQK64gaAjD4EALw_wcB
WOW! I'm really amazed. If I can be rich in the future, I will buy this model from you. Nice work!
Saw the list price, $1200. Yikes. And it’s not r/c.
Does it float?
No, just table top 🙂
*What a nice bismarck! That's amazing!*
Thanks 😊 I am just doing the rigging. I have some flags on order and will post a final video when it's all done 🙂 mine doesn't float like yours 😃
@@tommybowler1700 dove la posso comprare? Quanto costa?
@@carlomaxcarlomax1413 www.agoramodels.com/bismarck/?gclid=Cj0KCQjwyMiTBhDKARIsAAJ-9Vty5HrucZ4LsvpNk5qd1etFSL-43cdpGVTnWIfaZlTMBBXqjiQK64gaAjD4EALw_wcB