วีดีโอ

We had a similar problem - drum wouldn’t turn at all when you press start. It just makes a humming noise tried changing the start capacitor that didn’t help so I’m replacing the motor.

We had a similar problem - drum wouldn’t turn at all when you press start. It just makes a humming noise tried changing the start capacitor that didn’t help so I’m replacing the motor.

Motor was good capacitor makes the noise

Who can tell me how to bypass the prewash of that washing machine in this video?

Who can tell me how to bypass the prewash of that washing machine in this video?

I am new to your channel, but your videos are extremely helpful.

If you’re constantly greasing industrial or farm equipment things, then yes, it’s worth the investment. But if you use it for here and there and every once in a while, then my $40 manual grease gun works just fine.

small one is a 12V not a 20V

Ahh, The dreaded vertical camera.

great videos, fellow owner up north in WI, if you need anything call Seth at Laundry systems of Wisconsin. I had to get all of those maytag dryers out as they just kept having issues

If you would have heated up that hose in a dryer for a few minutes, it would have been more maleable. You would be able to get it to shape/bend at the drain end like you wanted it to. You can use a hairdryer or heat gun for the same effect. Be careful and don't melt it or burn your fingers. 🤔

Very clear explanation.

Great video

What size bags do you get?

I give you liks but it never shows ups it stays at 0

How much would that cost??

Do you use draino on the pits to clear it or something else???

Where do you buy the parts for the dexter washers and driers??

Is there a course you took to work on the dexter machines?? If so which one??

Giant Laundromats , You deserve more subscribers, wanna collab and grow together?

Thanks for the video.

Thanks for the videos very helpful

I thought nerd gumballs were made no longer??

I didn't know this before. Thank you for your easy tips 😊❤

Nice facility. It does need new machines though.

Those are a pain to get to

Very good explanation you just got a new sub 👍🏼

We actually had this same problem at the laundromat that I volunteer work at. We have older Dexter washers, and they don't have emergency stop buttons. What I did is that I had to shut the breaker off, open the person's machine, take their clothes out (they were really hot too), and pry out 3 screws. It could have seriously did a lot of damage to the machine if I wasn't there. Would've had a broken belt, motor may have caught fire, etc. Luckiest moment we've had at the laundromat. Now, every time I'm there, I check the drums on ALL the washers and dryers, and if I even see a loose screw or nail bouncing around, I throw it away. This video is really helpful. 👍

Cool laundromat! It's very upsetting that all the equipment is Maytag though. Especially those soft-mount front load "commercial" machines. ☹️ Hopefully y'all can get everything up and running again.

Problem is with dexter pay, speed queen, app, is then they have access to all your stores data/sales. These companies also build laundromats that they also sell to investors. I think you're basically just giving them free sales data and don't be surprised if a store pops up nearby. I'd rather use laundroworks, cents or another company that doesn't build laundromats.

Dryers are gas-powered? Is that efficient as opposed to electrical?

How did you all start buying laundromats

No 🔥 and that's a good thing! 😉

People of the Algorithm, Assemble!

Smell doesn’t mean clean

Nice

Its pop. Its always been pop. Always will be pop. 😂

Here before this blows up

Now get that Nickel out for us 😎

jUsT mAkE dRuGs LegAl, BrO

💐 P R O M O S M

Thanks for the video

I have the exact same Irwin snap ring pliers, had to buy one to remove the snap ring on my Maytag dryer from 1974 to remove the drum to lubricate the wicking material for the drum bearing a few years back. Also familiar with the pulleys on the back as well, I always clean and lubricate everything while the rear panel is removed to be sure everything runs quietly and smoothly. I suspect the motor bearings failed from lack of lubrication, possibly from the slider/tensioner mechanism not having any grease on it which keeps proper tension. If the tension is too tight, will put extra strain on the motor bearings, too loose will cause it not to tumble properly.

Skittles baby Ruth snickers do well at my location hot chips butter butter do pretty good honey buns grandma cookies

What-sells-the-best-is-the-slot-that-has-a-item-that-got-stuck-so-you-get-2-for-the-price-of-1🤣🤪😎🤠🥳🤡💩💀👻👹👽

Nice 😊

This is the TH-cam channel I’ve been waiting to find. Great info. Invaluable. Thanks. You have a new follower

Nice plz provide this types of maintenance video, it will help us.

What kind of floor covering is that?

Looks really really good👍 Great job😊