วีดีโอ

@@goochfitness26 Definitely have to bleed the calipers after changing it. Air in the lines causes the brakes not to work. If you fluid reservoir empties while bleeding you have to start all over. The master cylinder could also be faulty. I had two bad brake boosters for this vehicle. Try bleeding your calipers all around. It may take quite sometime. It takes me a while sometimes as well.

@@equalizedsoundautorepair48 thank you I started the process but one of my bleeder screws had the threading just peeling off so it wasn’t staying in so I gotta go get new bleeder screws. Honestly that could’ve been my issue from the start

@@adela8775 Thank you!! I appreciate the compliment. I'm glad i was able to help you!! Thanks for watching 💯 🙏🏻

@manofYahweh10 Awesome my guy!! Excellent price I'm glad I was helpful. Thanks for watching!!

@@LindseyClear-xj2ke The A/C went from cold to blowing warm air. It could fix the problem if it doesn't there is another issue. I'm may just need a recharge or could have a faulty A/C compressor.

@@lanemichael6608 Thank you my guy I appreciate you!! Definitely glad the video helped you. I'm doing well and wish the same to you.🙏🏼

@@ABCDNelson93 Thank you & you're welcome!!

@@TheCalvinHackett You're welcome my guy 💯

@@moniquesapp9319 Thank you!! You're welcome glad the video helped you!!

@shaneadams5456 You're welcome!! 👌

@armanx2 Thank you. I appreciate the compliment! It's nothing I want to do again lol. It can be a complicated job, lots to remember. So I made the installation video as well. I wish you the best option for your vehicle. Thanks for watching I appreciate you 🙏🏻💯

@Daniel-s9w4o Yes the catalytic converter will throw the same code. Always start cheap, then work your way up. I hope you don't have a cat issue. They are expensive I hope the best for your vehicle. 💯🙏🏻

@Mason-nk8gv Thank you. My guy ordered the kit a week later. I can't remember the exact one, but you should be able to find it on Amazon. They have a feature you can put in your license plate. It will help you find the one you need.👍🏻

@ultra_minecraft7827 No issues, the eco light may come on from time to time. It's says it's normal. I had to change the 82 ohm to the 100 ohm. The eco light came back and stayed. Once I changed it. It came on a couple of times, then went away. I've been using it since the video. The engine will start to adjust after it's driven a while. I guess it's cleaning the build up around the other pistons. They don't move as much, so i got the muzzler. It kept feeling like the engine was rough when in exo mode. Not in a bad way. Just not smooth. Other than that it's running smoothly without that stumble jerk.

@ultra_minecraft7827 Awesome, thank you!! I'm glad I was helpful definitely glad it wasn't the transmission 💯🙏🏻

@ultra_minecraft7827 I order mine off of Amazon. Type in VCM Muzzler for your vehicle. It's plenty of options, just do go to cheap 👍🏻

@Iismrgreen Thanks a lot! I'm glad my video was helpful, it's ugly on repair cost these days.

@yvonnecoleman6695 You are very welcome my friend!!

@@hulonpolk7224 Thank you my guy I appreciate the compliment. I'm extremely happy the video helped you with the mission 🙏🏻💯

@@samkitty5894 Hey , yes you do it just recently learned about that. I haven't looked up the procedure yet. I definitely will next time I come across these type of brakes to service. I'll look up the process with my computer. Thanks for asking and watching 👍

@@ivjr1 Thank you I appreciate it. Yes you must jack up the vehicle. Lol I ment to say quarts but all good it's on the jug. Thanks for watching and glad the video was helpful 👍

@@swthero Right on my guy. I had to repair that axle, upper control arm, tie rod ends and struts. The bolts rusted on the shocks and the pegs would just spin. I had to cut them out it sucked. The axle was the mission until hell visited me with all the other crap lol. I've sold that truck since this video. Thanks for watching and good eye my guy!!

@@armondhammer9 Thanks my guy 💯

@@jameerj5733 I'm sorry my guy I believe it's two different rotor sizes for that vehicle. I don't have the parts number it's been a while since I donr this job. I take one of the old pads to the parts store with me to match it up. I bought those from Autozone. Apologies for not showing or posting the parts number.

@@carlosalbertomunoz7930 It's a 6.2 inch screen

@wjm3018 That's wasup we all do something different. Neither is wrong or will hurt the vehicle. Thanks for commenting

@StanleyYe7nats You're welcome my guy!

@@AL197845w34832479823 Thank you

@@cmanhandymanreviews5 Yes

@gabriellara3182 Can't quite remember I believe I scrapped & and grounded to the body. Sometimes I unscrew the bolt to the rear seat. It helps to ground it better. I've been doing that to a really solid ground point in vehicles. I'm may change your issues & hope it does so. Please reply details good or bad. Hope this was helpful 🙏🏻!!

@@equalizedsoundautorepair48 OK sounds good. I will definitely try that. Thank you so much.

@@gabriellara3182 You're welcome 👌

@jkenney940 Thank you my guy! I appreciate the feedback & anything to help others to get the job done! I appreciate your other technique to help as well. Be safe and know you're appreciated 🙏🏻 💯

Also I remove the EGR valve first. Sometimes, they are rusty and break [bolts]. So I remove it first in case so the bolts don't break. It's ugly if they do.

@@Grief0032 Thank you for your response and feedback. I'd go synthetic if it's over 120,000 miles. It probably will help it run smoother during winter. Both of them will still do the job no matter what.

@ryanschindler923 Thank you! I'm glad it was helpful!!

@@johnryker8242 You're welcome!! 👌

Hi friend, what is the number part of the top and bottom sparkplugs?

@@franchezkoeskobar6116 I'm sorry my guy. I don't know the exact parts number at this moment. The plugs I used are [ NGK Iridium spark plugs]. As long as you know your year, make and model. You should be good at the parts store. Your registration has your vin # as well. I hope I was able to help!!

@johnryker8242 Thank you! I appreciate your feedback and I'm glad the video was helpful. I hope you're successful without any issues my guy 💯

@ethandewall2358 This part isn't connected to the thermostat. The housing surrounds the thermostat. The thermostat is inside the housing. This part has no thermostat in it. This is a separate part in the thermostat area.

@@equalizedsoundautorepair48 look it up on orileys exact name for the part

@ethandewall2358 OK my guy I appreciate it. I looked it up it's called [ Coolant water outlet]. Thanks for the info.

@@mstewart6204 You're welcome!! I'll make a list of tools for you to purchase.

@mstewart6204 You'll need a 1/2 inch breaker bar and a 19mm to remove your tire. You can also use a 4-way tire iron. 3/8 ratchet kit or wrench set. A large flat head screwdriver. C clamp or a Brake caliper kit. 18mm socket or wrench to remove the rotors. I'd grab a 1/2 inch socket set to cover all the sizes for future repairs.

@@equalizedsoundautorepair48 thank you so much for your response

@robertippoliti5186 If you just need the 0.2 of a quart, just buy it my guy. $8 to $10 for the little extra oil isn't necessary.

@@claycomb556 Thanks my guy I appreciate it! I hope you're successful!👍

@@equalizedsoundautorepair48 got it out and went for a socket and oil sending unit , thanks to you , I would of never seen that or knew how to replace it , again thanks 🙏🏻

@@xxsniperdragon1 Google or Siri for yourself, they both can be used my guy.

@@xxsniperdragon1 Dude you can use either its oil not water. If the video helped you cool if not watch another channels. It's always one person got something to say, and don't know what they're talking about. Thanks for the feedback though.

@taitedwards544 Thank you I appreciate it. 🙏🏻 I'm glad the video was helpful my guy!

@@christianlopez5009 I grounded it to the reverse light. Positive on one side and negative on the other.

thank you. Appreciate it!

@@christianlopez5009 You're welcome my guy 🙏🏻

@@00alan024 You're welcome I'm glad my video was helpful!👍