วีดีโอ

Thats a damn fine looking body. I wonder if itd fit my enduro sendero hd? I'm not overly keen on the cab and roll cage look.

At 10:47, I think the radio is a Turbo Racing 4 channel receiver. Btw, I have the gray one.

Nice work!

Looks good buddy!

Mean looking rig!

Nice video bro

just got one today really nice, i had the older 6s version years ago. this ones just as nice

Great insight on the rig and recomendations.

Mount the servo under the servo plate

U must jus suck at drivein ive beat on all my armmas an not sayin they dont break an i dont launch em to high mayb 10' at most but yea ther much tougher then your clamin

I was just setting here doing the same thing to the Nitto Trail Grapplers that came stock on my rtr Deadbolt. I figured since they're glued might as hack on them. Lol I've got the same General Grabbers and wheels that came stock on the Ecto.

Some guys were saying these don’t fit with most bead lock wheels?

I just bought the same one, do u know where i can buy new bodies for it?

Thanks for being Honest. Very helpful for my decision.

Nice truck! Thoughts on this vs the Sendero HD? I am getting my first 10th scale truck soon (have a few 24th scales) and at the moment are between those two. I get the impression this one is probably not quite as capable as a crawler since it's so heavy...but it sure does look nice. I really want to be able to put a driver in and would need to do some interior work on the Sendero to get that to work. Edit: also not totally opposed to getting the element builders kit 2 then putting a different body on with better electronics.

Wow thanks. Footage of using them?

2 words. Super glue. Shock never pops apart again.

You can definitely mount hyrax or any other proline tires on those wheels. It's a pain but it can be done. The grabbers are not a "rock" tire. They are a really, really good copy of the actual full size grabbers. They are a mud tire. I've found that they perform very, very well in stock form but only after being worn in a bit. I have also cut a couple of sets and they perform really well out of the gate but found that my worn stock tires out perform my worn cut tires. But I've also learned that if I'm building or wanting a rock oriented truck, I'll op for proline crawlers or super swampers and be done with it lol. I prefer a scale tire just because it's fun. 😂.

sounds like you just need to learn how to set toe. you should retry man! just remove the bar, thread each end out 1x and reinstall. i just messed with mine more of an annoyance then anything

Mount your servo on the bottom. You will get the clearance. If you watch his video on TH-cam about this servo he puts it in an element and does it through the bottom.

Nice review! Digging the channel, just subbed!

I have the vorteks and I break something every time I drive it. And I don't jump it..it cost me $10 every time I drive it..

They went up because of the dollar inflation.

Hey bud good video.i have the 3s typhon and have had some of the same problems.it is one of the cheapest cars in my collection so I'm not afraid to really hammer on the thing.

If I'm not using Pro-Line wheels with their foams, I always grind off the inside locating rib(the hump of blue foam that runs around the inside of the blue part). It's only there to center the foam on a Pro-Line wheel. Other than that I really like their two-stage foams. They make a big difference over stock foams for me, especially when a rig starts to gain weight from brass/aluminum upgrades. Also, if you leave the inner locating ring on, you may have some side to side movement after they are mounted, especially with wider tires. I just use a dremmel to take it off.

The extrem hight goes straight into the drive shafts. You better put spacers into the shocks to shorten them.

Stock generals are pretty great tires once broken in quite a bit and are great on wet rock. Ive never had the HD body but Ive heard a lot of complaints about it being thin. I had the trailwalker, trailrunner, gatekeeper and then got a kit and been building element kits ever since lol. SSD knuckles are my go to as well. Nice and beefy. The treal diff cover is the heaviest I have found out of SSD, Samix, Hot racing and Treal. Samix being the lightest. Nice upgrades so far!

Being in that location doing what you love is so relaxing

New Sub..Jim

Nice!

This is my first basher & totally agree with your review currently it's down due to front shock issue. One thing that is really annoying me is small stones blocking the steering it either blocks turning completely or limit it I can't drive for straight five minutes without coming back to clear the stones and debris from steering area and the whole chassis in order for it to steer well. I tried the duct tape fix/mod with no much luck as the environment where I bash is gravel.

Nice run liked and subbed 👍👊

Nicev💪👍

It's been awhile so I hope you're all square now, but just in case or for anyone else who might see this: The shock shafts can be reinserted with gorilla glue, so if you get a spare set for cheap you can just keep rotating them and regluing them as they pop apart and that works pretty well. I got tired of that though and bought some zd shocks basically amazon special. They're only slightly taller and have adjustable preload. Or 6s Typhon shocks fit if you want name brand. The driveshafts once they pop are done. After playing with the slipper and going from too loose to too tight and 3 sets of drive shafts and a crap ton of vids on how to do it "right" I bought the arrma cvds and as long as you don't have that slipper cranked all the way tight you'll be fine with those in the rear. Speaking of the slipper, find where you want it and then put a drop of RED lock tight in the back and then set it. The blue does not always seal strongly enough to keep it from self loosening. I bought the slipper repair set and even though the v3 does not technically need it, I use the additional locknut in the back that comes in the bag to ensure the slipper stays right where I put it. The spur is borderline sealed in if you see black dust in there the spur is scraping against the housing. You can pick up shims for a couple bucks to keep the spur free. I leave it plastic as it's cheap and fast to replace, so it works for me as the weak point in the drive train. The 4s line was discontinued, probably in part because making these rigs 4s takes this design beyond the scope of its capabilities imo. Ran as a 2s truck with some occasional 3s shenanigans will keep it running longer but screw that 😂 Mine has all the stuff I mentioned above done to it from running into the same issues as you, metal diffs front and back and the 6s spectrum esc in it now. I could have had a 6s rig given the money I dumped into it getting to do what I want but that's part of the fun 😎 plus I didn't have to throw down that big check all at once. But yeah if you wanna run em like the TH-cam guys do, get a 6s or prepare to spend some $ over time until it's where you want

We feel your pain, and have been thru the same experience you shared. Our kits and products resolve those issues. For high speed bashing, We recommend our HighPerformance Chassis kit. For abusive Jumping/stunting…we recommend our ExtremeDuty Chassis kit.

Nice video brother!

Thank for the video.

Absolute worst RC, hands down

What I do to mount is to make the tire inside out and stretch it over. Especially for single stage closed cell foams

Thanks, I been running these on my Gatekeeper for about 2 weeks. Seriously thinking about trimming like you have done. I just wish they would hook on the edge of a rock and pull. They can be just over the edge and spin rather than bite. I have 2 stage foams that was a huge improvement. But I would like a bit more from these tires. I am waiting for Duratrax Deep woods 1.9 to come back in stock. But I think opening the lug spacing is the trick to put these on par. They actually do a super job and are soft enough and seem to be wearing just fine. They just need a little extra.

You can put the traxxas max roof skid that fits pretty well and looks good. Only six bucks. M2c racing 17 mm hub convention. Badlands mx28.

Nice trail :)

very interesting, been looking at these but wasn't sure what the benefit was,now you say side hilling i get it,good vid bro👍👍👌

nice wheels dude👌subscribed 👍 👍 😎

Looks awesome!

Looks good dude!! Never sure about high clearance links. I’m running my enduro no springs, stock links almost flat. I just got some toe out though with my new hex extenders. Maybe the club 5 steering link will be perfect. Real good job! Like the bumpers, and bed!!

Please put them next to the stock trx4 tires. I am curious if they are the same size. The original Mudslingers 1.9XL are so much smaller.

Got mine last week and on the 1st run the shock post came out of the cup so I didn’t even get a full battery run. And it corners like shit. But the truck is fast as hell out the box and would recommend it.

I love my stainless hardware kit!

I can't wait to see how those tires do