วีดีโอ

Gonzalez Nancy Lopez Brenda Robinson Deborah

What wire did you use to Secure your tapping screw from backing out. Because I am scared to use tapper screws for the fear of them backing back out?

What wire did you use to Secure your tapping screw from backing out. Because I am scared to use tapper screws for the fear of them backing back out?

Hard as shit. Use the steering grommet. Make sure you route over your cab mounts along the beam. I didnt bother removing old inserts, shim seemed useless but I may come back and drill and pin them. But my shim slipped out even after installed

Do you think the Hulk hook would work good for using with a kinetic recovery rope? Also - what have you used it for?

Exhaust is always higher. And keep it so it can drip and not cause damage to surrounding stuff like siding and whatever you have on the ground. Also that screen, replace it with hardware cloth with 1/2" squares. Works much much better, and you can cut to conform. Great video. Loved the music. I just redid my venting today and i used my weather station to check wind direction for the past year. I based intake and exhaust off of that.

Question, how are your recon white lights doing? Are they leaking into your truck trying to get some and I heard from everybody they do unless you silicone the holes

Your bulbs that are in the truck are regular bulbs. They are not switch back so your switch back LEDs will not work.

Carolina wrens love to build nests inside of exhaust opening so some kind of non corrosive "netting" should be used.

Can you tell me what distribution box you used? Also, did you use a 30 or 40 amp fuse in the box an d another 80 amp near the battery?

Looks good except the driver's side is upside down.

Easy to install to existing horns or do I need to drill ?

If no one has remarked yet,....it's pretty obvious the HD lights of 2019+ are not same as 2019+ 1500. The exterior shape is clearly different, irrelevant to the mounting points.

Did you need the extra cables to reach the rear fenders? I have a truck,and need to know.

There are lights that fit in the 90 deg u that have white running light the yellow for turn signal. Also saw ram letter that have LED. If interested reply and I'll try to find them again or you can search like i did.

Sweet! Just got my custom tailgate and hood badges from Ikonic. Can’t wait to get them out on.

How is it holding up still about to order the matching grille one also for my ram. But was wondering how it’s holding up.

hey friend im like you.i have a 2019 ram.and when the weather get better i will also be putting on the underglow lights.i live in a cold area like you.NY so i have to wait till spring.but thanks for the tips you shared👍👍...th-cam.com/video/ASUFIIoky6s/w-d-xo.html

🥳🥳👍👍

I need to do this exact thing. My furnace has failed to fire a few times because my pipes get buried in snow... thanks for making this video!

i have that same exact "gang switch"👍👍🤩🤩

Wow!!😮you were a lot of help.i have a 19ram and i will be installing those undercarriage lights also.thanks a bunch.now i know what and how to do,i see your from ohio.im from NY.its so cold out im going to have to wait till spring.i have a garage.but the truck is to big to fit.but thanks any ways a bunch🤩...oh P.s im like you.."DIY"😆.....and i used the "GangSwitch again like you.....th-cam.com/video/ASUFIIoky6s/w-d-xo.html

I'm no rocket scientist but making the exhaust push through a freezing pipe will condense or freeze condensation will flow back into the line potentially causing a problem. If enough freezing happens the exhaust may become blocked. We just experienced -20F with 30mph winds my exhaust comes directly out the wall and I have a 3' ice mound below it now.

maria🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰

what do they call the thing over the intake at 6:38 it is some kind of filter but what do they call it so i can look for one, am getting a restriction from snow

Can you explain the remote modes? I have mine but can’t figure out all the modes

love the cab lights from RECON in white they look awesome

What bumpers do you have....love the clean look

What’s the app

At about 8:30 when you said the screws were coming loose did you lock tight them? Just wondering if I should use rivets for mine when they come in

My 2 year old decided to throw some rocks inside my pipes. My pipes do not come off like yours do, they gotta be glued. How can I remove some of the tubes so I can unclog it?

I noticed that the pipes were reversed afterwards. The one that looks like a basket was originally on the right. Does it matter?

Work hard hahahaha if u really wanna try working hard for try roofing and make sure to replace those that have 5 layers of shingles resting on each other and the 2nd layer is organic shingles lol now that's hard work lol jk man great work wish u the best health. White is too bright I agree make them look all purple hahahahahaha

Do you work on the airplanes?

Awesome video my man!👊🏽

You posted this a year ago lights still holding up and how’s the sponsorship go?

Hi, Looking to paint my hood badges (2022 Ram 3500) and tailgate emblem. If I provide you with the parts, how much would you charge me boss? Thx in advance

What did you find was the toughest part of wiring? Any advice for somebody who is nervous about splicing into current lights? Lol. Beautiful truck man!!!

How often did they send u stuff I just got sponsored by them

What app are you running to get white? Im not seeing it on the one that comes with the QR code

How much for a wheels sr!!?? (The chrome ones)

You just earned another subscriber.

they have switchback bulbs for turnsignal lights, so your markers are white running lights, signals are yellow for turning and 4ways

Badass Cummins man I like it

Ideally your flue pipe should be 12" higher then the intake. Also, you should have it pointing away from the home to prevent the corrosive flue gasses from saturating the building materials which can cause staining/rusting for some materials.

Now that’s a Fn lift! Love that it can’t even get the tip in the garage!!

I have a question I bought a 2021 ram 1500 v6 do you any recommendations to make it feel more peppy and just any over all things I could do to the truck thanks

Yea i used to work hard.. until a damn old lady took her buick out on the highway, fell asleep and drove into oncoming traffic and picked me to hit.. was actually on my way to a remodle job i was finishing up .. never made it.. old bitch broke my back, which broke my business, broke mt wallet, broke my mortgage.. broke apart my family.. broke my damn life.. she was fine.. no insurance so i didnt get a dime from her.. my insurance dropped me both health and car.. hell of a day.. now im just a shell feels like.. cant do anything longer than 30 mins otherwise my damn back will kill me over. So work till i pass out, means cant do ladder work anymore.. oh well.. ole walker is my friend now.. keeps me looking up, kinda..

dirty max jack would be proud!!

I have them on my Dodge Ram and the just don’t seem as bright as everyone else’s.....maybe I should add two per wheel well....what ya think?