วีดีโอ

Thank you. I had to watch the VSA part several times.

If only I could see where exactly the horn plug goes

If you don’t have to mess with the rotors, can you just take the brake pads off and just put new ones on?

do you got through all the gears in s mode or just to 2nd, I saw another video that indicated just to 2nd gear.

Great video. I have some clunking noise from the front end when I turn the wheels either to the right or left. When the turning point reaches its limit. Im hoping is not the axles. Car has only 65k miles.

I have 09 EXL. With Dipstick 😂. I change it every 30k. No problem

Terrible advice, to return the proper amount of fluid you should remove the overfill plug and fill the CVT till oil runs out of the plug.

Why even check it? If it holds 3.5 qts put 3.5 qts.

Víte co je zajímavé že já mám 2020 a jsou tam dvoupístkové třmeny, má někdo vysvetlení , kupováno v české republice

Great work, nice details... does it matter if I do my front pads before or after a front end alignment? I have lunch wagered on your answer... LOL Thanks

My local Honda dealership wants $300 to do this. What a rip off SMH!

Is it safe to hammer the axle in like that? Wouldn’t it damage the tiny clip? Just wondering bc I just went through 10 different videos and some stated you have to be careful not to hammer it or the ring will catch onto the spline

Should I do this 3 times to flush all dirty ATF out...?

For all those interested the ZF-9 fluid made by ZF for the multi use 9 speed transmission in other brand vehicles is the same as Honda 3.1. Fluid.

I can't get above M2 when I try to paddle shift to M3 or M4 it just blinks while in VSA maintenance mode. Ideas? - Thanks

Does this 19 homda need a filter replacement. Also not sure why after you filled the transmission fluid you drained a second olplug but did not out fluid in that spot.

lousy audio

Any idea how to stop brake knocking?

Just bought a tlx 2021 a spec, and im having problems with the screen, it flashes blue and doesnt give any signal

Is going through the VSA mode necessary? Or can I drain, fill, check and then drive?

That looks like a fairly new pump ? Was it installed wrong ?

Where do you buy the steering wheel ?

Thanks very useful !!!

Hi. Great video. Have a question… Which kind of drill and which tools do I have to buy in order to pull out the center bolt of the steering wheel?? Thanks.

Thank you for sharing your skills and knowledge. It looks you’ve been in Honda for long time and I can see how you work like a Pro. I hope you do more video specially on CRV2018 and PILOT2023. Thanks a lot and more power. ❤

thanks for the video. I will be replacing mines soon. Your one of the only ones that did not take off the camber bolts that might mess with alignment. 2 questions. Was the diff overfilled?. I saw some fluid come out when taking out the CV. Will I need to top off if diff fluid comes out? Also what is the torque spec for the axle nut.

Finally found the Car Care Nut but for Honda’s

I have disc brakes but for 2016 can I put them on a 2017 car?

Is going through the VCA mode necessary? If I drain and fill then drive the vehicle so that the transmission goes through all the gears, will this be sufficient?

Thank you

So, I ordered a new axle, I got everything on but the axle nut is half way screwed on. Possible that I received the wrong part?

Isn't there a filter (or filters) to change?

Bs video

These fing procedures to reset light, release auto ebrake, be able to run on lift, is beyond rediculous. The fact that in this day and age you need to drop atf at oil changes shows how terrible autos are, but we are forced into no stick options.

It would be super helpful if you included plug size so only gaskets could be replaced. Not paying 100usd for three screws

Is it the same process for the crv hybrid? I only ask cuz I’ve never done brakes on a hybrid with regenerative braking

Great video jump right into it

Great vid thanks. I used to just do my 19 Odyssey. Loved the drain plug torque to spec then no mention of what torque was. Lol. I looked around and found it to be 26 foot pounds. Figured that would work not being too crazy. Sometimes posted torques are way out of line.

Your telling me I've been dealing with my infotainment screen loosing signal and cutting in and out as well as that annoying crackling noise from my speaker for months because the clips for the tuner module on my Acura TLX and this is all it needs? Wth

Why are people hung up on torque? This is not a torque wrench or impact, it's a ratchet.

Thanks for the video.Just drove a 2022 pilot and when radio is turned off and or volume turned all way down I can here static.Believe any and all recalls performed.Any help would be appreciated.

My father in law has a 2018 CRV and the passenger rear and rear middle won't latch any idea?

3 different mechanics checked my CR-V and I spent a lot of money changing parts. The noise is gone, thank you.

Nice job... clear and concise.

Nice video! Maybe Someone can help me here with the differential. I have to replace the differential on my 2022 Honda CRV 1.5 turbo EXL. When I search on the internet, two codes appear: 41200-5TG-010 and 41200-5TG-900 Is there any difference between both parts? or both fits my car? I´m not in the US (different VIN) and the dealership does not give me the information I need

Hope you bring back making new videos!

What dealership do you work at? Looking to get brake pads changed on my 2018 Cr-v

Saying the size and head type of the botls would be really helpful. The same goes for the types of electrical connectors to help people avoid breaking them. The bolts on the side for mine had T-27 Torx heads. You can use a screwdriver to pop off the bottom cover. The black electrical connector for the horn has a push clip that you may need a flathead screwdriver the depress and them pull the connector off. The yellow connector needs to be popped just out of the housing clip and then the black tab just slides back away from the other connector to come off easily. The center bolt on the steering wheel has 14mm hex head (normal sockets).

Pls remove the 2nd part of the seat?

What are the torque specs?