วีดีโอ

Hai sir,it works without being connected to wifi

Is there any way to change the font to Indian fonts ?

After testing many libraries, about to give up , I found this one. It is great and works. Atleast I am happy that the p3 is not damaged. I just want to display some info in a few lines. However I could add only two lines. The first line is this matrix->setCursor(0,0); matrix->setTextColor(LED_GREEN_HIGH); matrix->print("Dt:"); Second line matrix->setCursor(0,10); matrix->setTextColor(LED_GREEN_HIGH); matrix->print("Th:"); matrix->show(); if I make it matrix->setCursor(0,12); , doesn't show full the character. a few pixels at the bottom get cutooff. further if make it matrix->setCursor(0,30); , it goes to the top, overlapping the first line. Height & width as defined as 64 & 64 What could be the issue ?

Please make a video to create font for this project

Hello. Thank You for all your work and sharing! If I want to use 30-pin ESP43 module (without PCB, I am just talking about pins), will I have all required ports in that less-pins version? Thank You.

Good project but i have a question hub 75 N and LE pin both are GND then how can we connect LE pin to G21 of esp32 which is already connected to sda of DS1307 in your ciicuit diagram in matrix rgb test arora

Ada file bin nya

Waardeloos filmpje. Hier heeft niemand iets aan.

not working for 64x64 32scan led panels

i want to contact with you can you send me your email address or others contact way ?

Gerberfile is not correct.

Hi, you Gerber file is not correct. ESP and matrix connectors on the same side..

Can we control a monochrome p10 module with this library, if yes , how?

good afternoon, I need help writing a sketch. I use P5-2121-RGB 64x32 and ESP 8266 I want to receive data from 2 DS 18 b20 sensors on the display. I want to see the temperature of the water in the pool and the air temperature. Ready to buy :)

In the end, in order to test the example, I also used pin E. But during compilation, an error will appear that the ESP_INTR_FLAG_LEVEL1 variable is not set. It should be located in a file located in the SOC folder. But this folder is nowhere to be found. I found such files and folders, but simply putting them in the library does not solve the problem.

Hello Sir, I Need your help, can you give me your contact number

How to show in code that E connecting to GND? I have DOIT ESP32 DEVKIT V1. And I need to connect SPI (HD card) and I2C (different wether modules). So I have not empty pin for E. I tested my device with other libraries. It works, but libraries very poor.

aurdino code ?

Can someome share the code base for this project ?

I would like to change the sketch so that the text (variable) can be sent via Bluetooth (BT terminal or Android app). Can you help me with this?🤗

ok

Nice

Which lib do you use for the sd card?

Very Nice. Thanks for sharing.

OoOo Nice work

Great !!!!

Ok

wonderful brother. but i wondering how you can add a new font to smart matrix library

Good morning, I still don't have an answer to my question, it's a shame This is a project that I carried out but which still has the problem of the summer/winter time change. I hope that finally someone can help me solve this problem because unfortunately I am not a computer expert. Thank you very much in advance

can i make this in 64x32 matrix panels of two? how?

Do you have the code available for this project? I could not find a link. I would love to build this!

Ok. Everything is very good. But how does it enclose the hex file?

nice example

Incredible!! I have one question did you process the gif before added to the sd card? And if is the case what change did you do?

this looks exactly what i was looking for, but no audio makes it too tough to follow.

Perfect..sir make the code available??

What diffuser material did U use ?

Can this be made to scroll text In between gifs?

Hello! Your projects always very interesting to me! :) A question: seems that there is no link to resources / files?

Perfect, can you send me the schematic and scratch for esp32? I will be very grateful

The pin numbers in MatrixHardware_ESP32_V0.h and the pin numbers in the circuit diagram do not match. Will it really happen like this? mhV0.h circutDiagram R1 pin 25 27 G1 pin 26 26 B1 pin 27 14 R2 pin 12 12 G2 pin 13 25 B2 pin 14 15 A pin 15 32 B pin 16 17 C pin 17 33 D pin 4 16 E pin 5 5 Lat pin 32 2 Oe pin 33 4 Clk pin 0 0 Which one is correct or should we leave it like this? I also have esp32 devboard V1, when I run it "SmartMatrix-master\src\esp32_i2s_parallel.c:384:69: error: 'ESP_INTR_FLAG_LEVEL1' undeclared (first use in this function); did you mean 'ESP_ERR_FLASH_BASE'?" It gave malfunctions such as. I selected the board version 1.0.6 from the "board manager" and the malfunctions disappeared, but there was no work. In this case, which version of fastled should be chosen? Thanks for your effort and information. Instead of such a detailed project, can we do a simpler project as an example? For example, just a scrolling text on a 128x64 panel, so it will be simpler to see whether the library is running on our card.

Hi bro, I have problem with DS 1307 and Wemos D1 mini. After uploading this library and set up the time I see this: 45:165:85 Thursday, 165 Friday 2165 45:165:85 Thursday, 165 Friday 2165 45:165:85 Thursday, 165 Friday 2165 etc. It displays wrong date and no incrementing time. What is wrong?

What is the value of R26?

Have you seen that the ESP32-S3 executes 16 bit fixed FFT 10 times faster?? using their "AI" vector registers.

Thanks! Good work

salam momkinn tsawblia wahd albroji on khalsak

Hello, how to customize the GPIO in esp32 board?

Are the 2812b displays or the p4 dipslay better?

Excellent job! I've already made several attempts but without success. I adjusted the GPIOs according to the scheme and nothing. where am I failing? if I make it. I will contribute. so that you can continue to provide us with more projects Thanks.

Reduce the brightness to get good video of the spectrum.