วีดีโอ

Thank you, very helpful 👍👍

Thank you Rick !!! Very helpful video, following your instructions made my DeLonghi EN520.S working again 🙂 Based on your video I have done the following: - Use toothbrush to clean inside the brewing unit as you show in your video - Putting the machine upside down and used hot water to flush from outside (where the coffee leaves the machine) to inside - Same as with hot water, I was also blowing air (by mouth) from outside to inside

tons of love! i am an engineer and didn't find this Problem. sometimes you should search for the simple things! i disassembled it completely a few times, changed also the flowmeter because of an other defect. finally, my 12 year old machine runs perfectly again!

Thank you for the useful info - and for taking the trouble to do it in English, much appreciated!

Thank you for this. I can't believe that a simple thing like cleaning the filter solved this problem 🙏🙏🙏

Thank you

It worked for me thanks again. If the toothbrush is not enough, put the machine upside down in a sink and flush hot water into the tube , you’ll see a lot of coffee residue will fall down.

It worked for me thanks again. If the toothbrush is not enough, put the machine upside down in a sink and flush hot water into the tube , you’ll see a lot of coffee residue will fall down.

It worked for me thanks again. If the toothbrush is not enough, put the machine upside down in a sink and flush hot water into the tube , you’ll see a lot of coffee residue will fall down.

Wonderful, thank you

Thanks so much for your video! You just saved me buying a new machine!! Brilliant

Worked like a charm! Thank you so much Rick!

I had the same issue... whenever I was setting a cup of espresso around 1/5 of the coffee ended up in the cup container. Did follow the official cleaning steps delivered by Nespresso with the official descale products but nothing did help... but after cleaning the machine no drop of coffee was ending up in the cup container! Thanks Rick!

Hoi rick je spreekt met sander uit Nederland ik woon in Haarlem bedankt voor je video ik heb nog een vraagje ik heb een delonghi nespresso en750.mb iets andere type Ik heb Brouwunit Zetgroep vervangen maar zins die tijd doet hij het niet meer als ik hem aan doe dan branden heel even de lampjes die daar na uit gaan verschijnt op de display reparatie nodig Wat kan dat zijn ik hoop dat je verder kan helpen ik kan hem niet meer gebruikt het was een duur apparaat echt balen Gr sander

You are The boss👍 I got a lot of grey hairs with this problem😅. KING!!!!

Thank you Rick - this was incredibly helpful. I think I've worked out why this works as a fix - after the coffee has come out of the capsule, it goes into the spout. In the spout, there are four tiny holes through which the coffee as to pass to get out the nozzle. If these holes are blocked, then the coffee backs up in the spout and then pours out into the pod container. So the compressed air / toothpick is clearing these holes. Two things gave me this hunch: firstly, it was coffee that was leaking, rather than water, which implied the coffee was coming out the other side of the capsule. Secondly, there was a delay from when coffee would start brewing to when it started pouring into the pod container. I ended up opening up the machine using this video: th-cam.com/video/Ck-O_8p1z68/w-d-xo.html, which was helpful. Then was able to take the spout off the dispenser, and then could see that the four holes were completely blocked with coffee residue. Gave this a scrub, put it back together and bingo - no leaks :)

Thanks sooooo much!!! You saved me $500 on new machine!!!!!! 👍👍👍👍👍

Ik heb in Voorhout gewoond van juni 1970 tot en met juni 1986, ik ken alleen het oude dorp nog. De wijk Oosthout was net klaar in 1986 toen ik naar het buitenland vertrok.

Thank you for sharing. This is an excellent maintenance tip.

Just found this as I was about to buy a new machine. Fixed it and saved me all that money. THANKYOU!!!!!

My machine have a leakage from the back where d water box is

I was about to spend $599 on a new machine (low stock due to pandemic and no sales). The toothbrush and compressed air seems to have fixed the issue! My 5-year-old machine has more life now. Thanks!

Do not forget to check coffee grounds at the outlet + additional plastic due to wrong molding (I had this problem), but for this, you have to disassemble it (back, right and upper cover plates and the capsule press part completely. Here's a good guide: th-cam.com/video/iefNUcJcK4E/w-d-xo.html&ab_channel=HardwareVip

Bedankt, ik ga het ook proberen.

Great vid and very helpful! I have the same DeLonghi EN520.S, but even after cleaning for about 4 hours with a brush and air compressor as suggested, the machine still leaks. I guess it's to buy a new DeLonghi, since mine was bought about 7 years ago.

Toothbrush and compressed air do nothing for me? It still leaks water.

I’ve got an issue where I run the espresso button, only a few drops of water come out of the spout but I end up with a pool of hot water under the base. I’ve tried detaching the bottom panel and blowing into that intake but still no luck. Machine seems like a waste of 300 bucks

Thanks great solution, I also needed to turn machine and use a toothpick to unclog spout and flush through over 7 times

great advice, to much aaaaah aaaaah aaaaaah

Thanks for the video Rick. Our machine was doing exactly the same thing and we had already tried cleaning the inside with a toothbrush which didn't help. But after seeing your video we turned the machine upside down and ran water through the outlet with the tap turned on high and also held the spout of the tap in through the opening on the top of the machine (with the chrome lever fully opened) and washed water through the spout that way. Flushing water both ways cleaned it out and it's now working again without leaking into the used pod container.

Thank you for posting this video! I was able to fix my parents’ machine!

Thank you, machine now works much better. Still leaks a little, rarely, despite scrubbing and blowing air through it. Suspect this happened due to people leaving the capsule in it after use and hardening in the machine. Definitely saved me a few bucks by trying this

Only went and worked, thank you good sir.

This fix worked for my machine. Thank you Rick.

Same story, it's leaking where water supply hose comes into the capsule unit because of the overpressure. Thanks and good luck!

Thank you sir. From 🇬🇧

I was about to search for replacement parts for the capsule compartment, until I saw your video and did exactly as instructed. Now the leaking has stopped!

Thank you very much. You saved me a lot of money. Cheers!!!

Yup brilliant thanks. I had to tip the machine upside down and run hot water into the nozzle.

Good video and thanks for making it. I needed to go a step further however. I took the entire dispense unit out and soaked it overnight in water with a high concentration of bleach. Perfect after that

thank you it works for me too

Thank you Rik, just bought a machine off EBAY and started leaking after 1 week , I did your toothbrush & air compressor trick and now all working 👍. I bet the previous owners sold it because it was leaking and didn’t see your solution, so it was a lose for them and a Win for me 😀

I used a straw cleaner, i think it pretty much did the job.

All I heard was Haaaaaaaaaaa and haaaaaaaaaaaaaaaaaa Then you the haaaaaaaaaaaaaaaaaaaaaaaaaaaa 👎👎👎👎👎👎👎👎👎

Just found your video. Fixed the problem perfectly. Thanks very much

Thanks , excellent advice . followed your tips and machine is working as it should . Saved me throwing it out . thanks .

Thanks for the tip

Thanks Rick, great fix... Glad I came across your video, I'm sure it's helped lots of people.

Thanks! I've been spending hours looking for a solution too! Great fix!

Thanks, this saved me 50 bucks!! 👍🏼👍🏼👍🏼