วีดีโอ

Buy a back up vehicles like a truck and wait until the truck that youre currently driving blows a motor of high rpm or transmission 👍🏻

Sometimes just changing the solenoids fixes the problem Remove transmission oil pan Replace both solenoids for 1/2 gear and 3/4 gear And while you down there also replace filter I did that to my truck @ 200K miles now it has 400K Original motor Original transmission Go Chevy

from what I've seen these trucks have a problem with weak clutches in 3rd and 4th gear. My 2001 Yukon XL 1500 is having the same issue. Probably gonna have to either have it rebuilt or swap it out altogether. Good luck

Ok, this is awesome…I thought I was the only guy who was curious enough to take things apart to discover their functions…bravo! Well done, God made you/us the curious types 😉

Excellent. Thank you!

You ever figure it out I got an 03 avalanche doing the same exact thing

Did you figure it out? I have an 03 Tahoe that’s doing the exact same thing.

Absolute best vid of this common problem with chevy actuator . Whether I replace or fix like you did, you made it crystal clear. Thanks !!!! Will subscribe !

Very industrious and helpful. That little gizmo costs over $100, so it's a worthwhile fix.

Thank you so much for making and posting this video! You are what the internet and youtube should be all about. Great work!!

Good video.

Thx

Lord ....😭😭😭 forgive us for what we are doing🙏🙏🙏😭😭😭

Used Princeton transmission slippage and repair it helps for hard shifting and slippage and where in these vehicles overtime the seals in everything were out and that stuff will help it

How they hold up, Any flickering?

Try to manually shift it with the gear shifter put it in first then shifted up the second then second to third and then third to drive and it might manually shift itself out of second gear you're driving around in second gear at 5000 RPMs i.

my 05 colorado is doing the same damn thing. No idea what to do.

Lol you in Atlanta. Wands fix mine. I’m off godby 🤣🤣

You are an amazing problem solver. Thank you for the video sir.

Great man.

Man my ac being stupid af I give up literally I been trying for weeks get my silverado to blow cold air I tried everything I cleaned the condenser under the dash I changed filters I put 2 stop leak cans in that bitch and still no cold air it gets me mad as hell because it was working better than my house ac I give up on this truck man took the whole dash reset some fuses still my compressor turns on to so it's not that if anyone know wassup lmk I'm bouta just use this truck as a winter truck if I can get the heater running also 🤦‍♂️

awsome video

I appreciate your one-handed work. I would have dropped the stupid thing and gears would have went everywhere. Just changed mine. The main gear was broken. When you said you are using one hand on the camera it reminded me of Richard Brenner's joke about his mom. His mom would get exasperated with him and say "Richard I only have two hands!", Brenner turns to the audience and says "Do other mothers have more hands?". That always gives me a chuckle. Thanks for the video.

That's actually the easiest one to replace try replacing the upper driver side actuator that fails such as hot air blowing on passenger side but cold air on driver side requires removing upper dash I removed the air bag for easier access still a PITA...

By 8:43 I found this to be absolutely eye opening. In short, had you take a picture of that blend door actuator gear prior to dismantling it, all you need to do was re-align it back after making your adjustments. 2nd, Had you cleaned off those contacts and the carbon surface with Isopropyl Alcohol to remove grease on them, plus Re-Grease with synthetic grease the gears, all would likely be as good as new. When you adjust/bend old brush contacts, you risk stressing them and they "may" break before or after re-installation.

Thats a good job. Thanks We have to stick together and share this type of info so the corporate rats dont rip us off

Thank you

Nice job. I actually would not have even thought about trying to fix the actuator. So thanks for taking it apart and showing us how to fix it. Looks like it should work again, and sure is cheaper then buying one!

Thank you, great help.

Really good video. Good explanation, zoom, everything. No music distractions. Perfect

Fantastic Video! Great Camera work - totally amazing that you did this without second person. You showed a perfect view of the actuator blend door and the need to align things when reinstalling. I had already gotten a replacement, but now pulled the old one apart and see the issue - it was the same as yours! Contacts had gotten buggered up with grease. Again - THANK YOU!

Very good detail on your repair. Did it work or did you have to replace the actuator with a new one?

💯. My heater control didn’t work and I “thought” it was the actuator and watched your video. Simple/plain & easy. I’ve paid to replace them before 😂. Turned out that the knobs needed to be pulled off and the knob post needed to be sprayed with electrical cleaning spray and turned back and forth a few times. Cost $7 & 4 minutes and 20 seconds into your video to get er dun! 💪🏾THANKS BRO 😎

Thank you for the info bro. I'm getting ready to take my moms apart in her suv and try this. Greatly appreciated. Looking forward to watching more of your videos. Thank you.

Hey good job but that last screw on the actuater is a real pain on 2004 gmc yukon xl a lot in yoyr way to get to it what is the tool to get to it

Good info bro.. I'm about to go try it, I was told this might be my problem since I get cold in back but not in the front of my 04 denali xl

Great video! Saved me a lot of time and money!!!

good job!

@Crazy or what ○ Often putting antioxidant on the connector contacts will so much good ○ They are making insane profits on these → they are toys that should not be in critical life systems

Thanks for this video. Very good information. I have a different vehicle but this was good information.

"Noiceee!"

will this fit the sub compact xds .40 ?

This is funny because my xd subcompact mod 2 is going to hold 36 😂 with out breaking the spring and just changing the base plate if I broke mine like his it might hold 39

Dem glove don’t always work sumtimes u gotta use rubber gloves with them snow glover

I tried to crimp with the biggest pliers I could find, but wasn't working. then my neighbor said use a hammer... duh

That's coo bro but if u didn't notice some bullets came up slow u might get a mis feed

I need this done asap

I'm not saying that hot is hot. But it's definitely not his

Would this work In the sd40ve bro

Has it ever jammed on you??