วีดีโอ

Will this fit on my 2020 Hatchback EXL?

Do you think with a FK8 lowered on spoon springs I’ll be able to get away with that wheel and tire spec without rubbing? I know spoon springs are not that aggressive when lowered.

🔥🔥🔥

I got myself these today on eBay to match the rear ones. Hope I can do the wiring part, and I inserted the wires on the connector, and they stay on the connector on my rear ones.

Thanks for the support and please consider subscribing if this video is helpful 🫶🏼

What lip you got on?

Whatcha lowered on ?? What size rims are those?

I just connect my to my sidemarker..so easy..

Looking slick bro 💖

HI ok for the indicator already connected, while I would like to connect the white wire to the DRLs, so that they are on during the day and not at night. I have full LED headlights and I set the headlights to automatic mode. What is the pin connector to connect to?

Just so you guys know you don’t have to splice any wires the wiring for the lights comes with pins and you can back pin into the connector. If anyone needs a video made I certainly do that but no need to splice the factory harness.

what bags are you running? love your setup, want to get one so bad 🔥

Blast pipes are the best!!

😢😢 i want have that car

Hi I like that phone mount how did you get it for free

Besides the blast pipes but, just because it’s not my thing doesn’t mean that car still isn’t 🔥 lol

How is your suspension supposed to move when your tire is so close to the fender like that? My car is lowered and I'm getting ready to fix the camber but I have at least an inch and a half before it'll hit the fender. And im concerned about that.

You can take off that nut and gain yourself another quarter inch. The nut closest to the end by the joint. That ball joint threads on in reverse just undo it all and take that nut off and then put it back because that part actually doesn't need to be locked like the other lock nut does. It cant spin.

Was the wiring difficult. So that means it didnt come with instructions

👌👌👌👌

I thought the front wasn’t allowed any tint?

whats that grill?

Where did you get your side skirt? Looks dope🔥

What’s ur tire set up/size to get that stretch

To be honest, the lip makes your car look cheap. There are much better-looking lips for the Civic, but probably need to spend a little money than that ebay special.

How can you find these lights and what are they called?

I have the same lip it’s really not that bad if it’s installed well

Great video man just bought one myself. I noticed you left the stock front lip on and there are some gaps between the new front lip and the actual car causing the white to peek out, is that because you left on the stock lip or just have to push the new one a bit more on onto your car? Thanks

Nice! How long did it take you to get it?

Yo bro, I’m confused on the wiring, is white constant power if you don’t want constant power where do you wire it ? I thought you could just cover it up with electrical tape and it’d be cool but I think it keeps draining my battery, so could you tell me where you put it ? Signal works fine but I think the white wire not being connected to anything is draining my battery

What spring rates are you running?

thank you so much bro for making this video. Now I'm decided to buy the same front lip on your car. It looks clean and aggressive bro.

I really wished this lip was actual bumper material but it’s sadly just some weak flimsy plastic. If you barely I mean likely barely go like 1mph slow like a snail and touch anything like concrete the two outside rear pieces literally get damaged and loose at the ends. It doesn’t get like loose to where it can fall off but the two shaped ends literally start flopping around. This lip does make your front longer and side front longer so your normal judgement should increase. I installed my 2nd one cause it’s cheap to get. But definitely test the led’s first before you install them. The led’s are easily replaced with just two philips. Luckily my first one I didn’t throw away and I transferred it over. But again I hit a curb side ways yesterday and the led plastic broke off exposing led. I am going to use some glue to bind them back together. General tip is be extremely careful and use 2-3 inch double sided tape. Do not use the thin half inch or 1 inch double sided tape or the ends will just adhere to the bumper and not stick after applying. Again the plastic is extremely flimsy where you touch anything it will crack or break. If you are paying anywhere from $150-200 for this lip you are pretty much getting ripped off. Unless their version is actually real bumper material not some flimsy cheap crackable and breakable plastic upon some of the lightest impacts.

Whats your wheel size and offset 🔥🔥

What's the different on the one you got and the ones I see on Ebay?

Just installed mine. But wow anyone else having issues getting the sides to stick? No matter what I do it will not stick. It just literally let’s the side go. I’m not sure if it’s the material as I used the same 3m double sided tape to hold my rear led spoiler and rear top visor.

Hey bro any problems with the camber arms hitting the frame when you would lower it?

How is it holding so far?

Is this a manual sport???

Would this fit on the sedan ?

Saludos una pregunta no removiste el lip original del carro? Yo quiero ponerle un lip así ami civic hatchback 2021 tu cres q funciona

Una pregunta donde compraste el aparato para que baje y suba de posicion, gracias!

LED strips breakdown after a while depending how much you daily it… only had mine for 3 months and already have some light bulbs on the strip not working..

Hey I have a civic 2021 sedan with godspeed camber arms instead but I’m having the same problem you did, basically my right tire sticks out a tiny bit more than the left one and i cant figure out why, did you ever find out why this is happening? I keep researching and cant find an answer

Do you think the front lip would fit on on the after market type r front bumper

Where do u get the front lip?

What’s the specs on the rims?

How long did it took you to install it ? And how is it holding up with just the 3m tape ? Im planning on getting one on my hatch as well. Btw your car is cleaaaan 🔥

I got the front lip for my 2020 hatch but the sides doesn’t flush well to the fenders. Did you have this problem with your install?

Did this solve the rubbing problem? I have the same issue with my 2022 and I’m looking for solutions