วีดีโอ

Not for sale, I bought it brand new and I’m keeping that one. 😉❤️

I actually had a really close friend wrap mine and I think it was about $350 with materials. The vinyl was a bit expensive because I insisted on 3M atomic teal and it was (might still be) discontinued during the pandemic. So my friend called around to dozens of wrap shops around the country to find someone who had enough left for my needs. Not sure if my price is typical or not.

All of the parts are from @steadygarage I used the Chimera U-bomb bar and woodcraft/vortex clip ons.

It stays lit as a normal running light and brightens when the brakes are applied as it should.

@@xtramediumminimoto I was told to connect a wire directly to the battery and one to the 7.5 fuse was this something you did

Absolutely not. Do not connect straight to the battery, just use the original connectors for the brake light and signals.

Thank you! I try to focus on the project and leave myself out of it.

❤️

With the right tire you do not lose any low end. The 12” wheel and tire is lighter weight than the 10” wheel and tire.

Fastest I’ve seen on gps is 64mph. I’m confident I’ve gone faster but that was down a big hill come back from Look Out Mtn outside of Denver, did not have gps on at the time. Does about 60mph in the city with enough room.

I used a flasher relay from 12”o’clock labs. No extra resistors or anything else on mine.

​@@xtramediumminimotonice, do you have a link? How much is it?

All the info is in the video.

It worked for me, without seeing how yours is done and the parts used I can’t say for sure but it’s the best one I’ve found.

I used the Chimera U-bomb bar from steady garage with woodcraft clip ons. Mine are about 2” lower than stock because I used PCX150 lower mounts.

I’m sorry I don’t have a link for you.

@@xtramediumminimoto Really?

Yes really, if I had a link to share I would have posted it two years ago when I built this bike.

@@xtramediumminimoto But there must be a way to get those rims, because they were from Japan, so you just have to know who the manufacturer was and what the name of the item is, that's enough for me!

They were special order at the time and I bought the last 6 that were listed for sale. They also don’t fit with out machine work. You can make 3 piece wheels with any width and offset you want. You don’t need my wheels to build your own.

I’m sorry I don’t have a link for you.

110/70/12 front and rear. These are Kenda KD1 racing.

Basic spade connector sold at any local autoparts store.

These are custom, sorry none for sale here.

Whats the point? It’s in the title and in the video. You can’t use LED lights without the conversion.

I bought the wheels from japan and had them machined to fit the Navi hubs.

@@xtramediumminimoto What is the name of the manufacturer? Can you give me the contact information?

Sorry no, they were special order. But any wheels 2.5-3 can be used if they have the right offset if you machine the center bore out and redrill the bolt pattern.

Thanks! I built this almost 2 years ago, so some of the best answers are in the comments already. The rear shock is wirus win from webike japan, changing the grips is pretty easy. Just make sure to buy 7/8ths sized grips. Removing the old ones is easiest by cutting them off.

The 12” wheel has larger holes than the original 10”, so with the right tire combo you can have less weight and larger overall diameter that will give you more speed. Just using a bigger 10” tire will add too much weight to see a benefit.

Thanks, hope you like it!

I don’t understand your question, it’s all very clearly shown in the video.

It’s from japan for a pcx150 but I had it modified for my Navi.

Thank you!

Awesome! My dealership got 5 more this morning and two of my friends snatched some up.

@@xtramediumminimoto dayummm! I bet that would be fun af! Superminimoto Squad hahaha!

There’s 5 of us so far. The boss HATES it! 🤣

@@xtramediumminimoto hahaha he’ll give in eventually 😝 make him ride one

No, he was definitely angry. Haha and he’s a bit over the size limit. Probably why he hates seeing us have fun! 🤣

It has a good personality! 😝

I have some other details coming soon but won’t be doing all black unless I recreate it from carbon fiber.

Any local autoparts store will have what you need.

Thanks! I’ve made some more updates but life’s gotten in the way and I just need to finish reassembly so I can show it off and ride it again. Hopefully soon!

Not sure I can explain it completely but the Navi is wired very similar to a MUCH older and less complicated bike. It uses AC for the lights because they’ll still function with a dead battery. So it can still be kick started, and ridden even if the battery is dead. It’s a safety function. However it’s ALSO a safety function to upgrade the lights for better vision and to be seen easier.

For the wheel? Looks like they’ve changed the part number so maybe they have more in stock? www.babbittsonline.com/oemparts/p/honda/44650-k74-a00/wheel-sub-assy-fr

All Navis come with drum brakes front and rear. If you’re meaning disc brake, it took a lot of custom work to make it happen on mine. You can find me on IG or half a dozen Navi groups on FB. Xtramedium911 on IG. 👍

They’re custom machined for the Navi hubs. I have the only ones.

Thanks Dana!

That’s included with the OEM windshield. Thats how it’s mounted.

I hope it helped!

Sorry I don’t really know what you mean. The way I show how to do it requires no splicing. I only recommend doing it this way because I’ve done it on several Navi with no problems.

@@xtramediumminimoto I mean if that wire is already in use for something else. Could I splice into the same wire and it would still work?

I have no idea what that wire would already have been used for so I really can’t tell you if it will work or if it’s safe. I’d undo whatever was done previously and start over to make sure it’s all going to work correctly.

Thank you! Both of my Navi have different combinations from SteadyGarage.com. They each have the Chimera U-bomb bar with clip ons. They have 2 options the clip ons and the U-bomb bar comes in black or polished, narrow or wide. I have different combinations on each Navi and like them both. Lots of adjustment.

Waiting on one more part and I’ll be able to show off the new lights and other details. Hopefully it arrives today or tomorrow so I can finish it this weekend.

Hotlap japan. They have more than one option now.

There are a couple easy things to check, make sure it’s not over full on oil, tires have good pressure and brakes are adjusted and not dragging.

Thank you! I’m hoping to having something even better soon. The Bride pattern is almost too big for the little seat. Haha

@xtramediumminimoto I was going to say, "I have some in my garage, but the lettering is about 8" wide" Your seat still looks pretty good. I'll trade you my stock one, lol.

I actually did two. And gave the better one to coworker and mines a little crooked.

I used a solid stainless steel bar that was a little shorter than the original so the pegs would sit perfectly in the body. It really depends on the pegs you use because you don’t want them to stick out further than the originals.

Thank you! More updates very soon!

Chimera U-bomb and clip ons from Steady garage. They have several options.

Sorry I made this videos so long ago I don’t remember exactly but believe it’s 12 or 14.

@xtramediumminimoto no worries. I actually looked at the wire on the "add a circuit" and it said 16 awg.. which means that its a 16 gauge. So I figured it out 😅 only problem is the female disconnects I bought were wrong and don't fit to the brown wire I popped out. I think I need specifically a female "spade" connector. I just put the project to sleep last night. Gonna continue on today.

Sounds like you’ve got it figured out. 🤙🏻 II think I used 14g because it’s what I had in my garage already.

I generally keep mine tuned to stock idle but this one doesn’t have a tach so I can’t say with good confidence what it is.

This is 1000% the best case scenario. Most people could just ask a friend for help and they already know someone with the needed stuff in their tool box. 👌

@@xtramediumminimoto I did have to cut the battery cover a little since it wouldn’t fully close. But that just a minor cut to make space for the fuse jumper.

That’s a personal preference mod really. Not super important to make it close but I did something similar on one of mine.

I’m happy to see so many people people excited about them. It should encourage Honda to bring all the others to the US soon!