DigitalDesign Forum
DigitalDesign Forum
  • 144
  • 215 803
Revit Westerpunt Observation Modeling #3 : with Twinmotion | by Studio MOTO
이번 영상에서는 지금까지 Revit으로 제작한 Westerpunt Observation을 Twinmotion과 실시간으로 연동하여 간단한 동영상을 제작하는 방법을 소개합니다. Revit에서 수정된 내용이 Twinmotion에 즉시 반영되기 때문에 작업 효율을 크게 향상시킬 수 있습니다. 또한, 실시간 렌더링 기능을 활용해 더 직관적이고 생생한 디자인 검토가 가능합니다. 영상에서는 Revit과 Twinmotion 간의 연동 설정 방법, 변경 사항이 실시간으로 반영되는 과정을 보여드리고, 이를 활용한 프레젠테이션 제작 팁도 함께 공유합니다. 지금부터 시작해 보세요!
💡 영상에서 다룰 내용:
[00:40] 레빗에서 다이렉트 링크로 트윈모션과 실시간 연동하기
[01:10] 필요없는 객체 삭제하기
[01:37] 커버 재질 설정하기
[05:22] 레빗에서 간단한 모델링 추가하기
[08:58] 레빗에서 연동된 객체에 재질 설정하기
[12:27] 랜드스케이프 디자인하고 수목 식재하기
[18:42] 바다 표현하기
[22:27] 비디오 작성하기
[28:30] 영상 내보내기
❤️이 영상이 도움이 되었다면 좋아요와 구독 부탁드립니다! ❤️
더 많은 콘텐츠를 위해 알림 설정도 잊지 마세요.
📥 더 많은 정보는 아래를 참고하세요:
온라인 건축 강의 : nosasu.com
건축 실무자 커뮤니티 : digitaldesignforum.com
📌 관련 링크:
Studio MOTO : studiomoto.be/
#revit #건축모델링 #WesterpuntObservation #StudioMOTO #archidaily
มุมมอง: 93

วีดีโอ

Revit Westerpunt Observation Modeling #2 | by Studio MOTO
มุมมอง 14928 วันที่ผ่านมา
이 영상에서는 Studio MOTO가 설계한 Westerpunt Observation을 오토데스크 레빗(Autodesk Revit)으로 모델링하는 과정을 보여드립니다. 특히 계단을 중심으로 독창적인 커버 디자인을 구현하며, 레빗을 활용한 모델링 기법과 그 무한한 가능성을 함께 확인해보세요. 💡 영상에서 다룰 내용: [00:37] 가이드라인 수정 [03:09] 바깥쪽 커버 작성 [22:58] 안쪽 커버 작성 [29:26] 하단 커버 작성 ❤️이 영상이 도움이 되었다면 좋아요와 구독 부탁드립니다! ❤️ 더 많은 콘텐츠를 위해 알림 설정도 잊지 마세요. 📥 더 많은 정보는 아래를 참고하세요: 온라인 건축 강의 : nosasu.com 건축 실무자 커뮤니티 : digitaldesignforum.com 📌 관련 ...
Revit Westerpunt Observation Modeling #1 | by Studio MOTO
มุมมอง 231หลายเดือนก่อน
이 영상에서는 Studio MOTO가 설계한 Westerpunt Observation을 오토데스크 레빗(Autodesk Revit)으로 모델링하는 과정을 보여드립니다. 특히 계단을 중심으로 독창적인 커버 디자인을 구현하며, 레빗을 활용한 모델링 기법과 그 무한한 가능성을 함께 확인해보세요. 💡 영상에서 다룰 내용: [00:21] 형태 살펴보기 [02:50] 가이드 라인 작성 [07:55] 슬래브를 활용한 지형 작성 [12:38] 레벨 설정 [13:11] 콘크리트 계단 작성 ❤️이 영상이 도움이 되었다면 좋아요와 구독 부탁드립니다! ❤️ 더 많은 콘텐츠를 위해 알림 설정도 잊지 마세요. 📥 더 많은 정보는 아래를 참고하세요: 온라인 건축 강의 : nosasu.com 건축 실무자 커뮤니티 : digital...
Revit 2025.3 주요 업데이트 5가지 | New Features
มุมมอง 194หลายเดือนก่อน
Autodesk Revit 2025.3 업데이트에서 추가된 5가지 주요 신기능을 소개합니다! 작업 효율성과 편리성을 높이는 다양한 기능을 함께 살펴보세요. 1.애드인 매니저: 플러그인을 쉽게 관리하고 로딩 시간을 확인하여 Revit 성능을 최적화하세요. [0:00] 2.오타 검수 기능: 실시간 오타 감지로 문서 작업의 정확성을 높일 수 있습니다. (현재 영문만 지원) [1:40] 3.레이어 복제: 복합 요소 내 레이어를 간편하게 복제하여 작업 시간을 절약할 수 있습니다. [2:30] 4.룸 참조선 태그 중심 정렬: 복잡한 다이나모 스크립트 없이도 간단하게 룸 참조선과 태그를 중심에 정렬할 수 있습니다. [3:23] 5.PDF 백그라운드 작업: PDF 내보내기 중에도 상태 표시와 함께 모델 작업을 계속할...
레빗 2025 신 기능 | 주요 업데이트 7가지 소개 [What's new In Revit 2025]
มุมมอง 1.2K8 หลายเดือนก่อน
건축 실무 강좌 1.패밀리 배열 기능 개선 0:22 2.빠른 정렬 기능 추가 0:54 3. 시트 컬렉션 기능 추가 1:22 4. 벽체 끝단부 마무리 기능 개선 : 02:59 5. 룸 둘레 측정 개선 : 03:44 6. 벽체 자동결합 및 잠금 기능 추가 4:44 7. 멀리언 프로파일 다중루프 기능 : 5:50 Software Version -Revit : 2024,2025 Information Website : digitaldesignforum.com Learning : nosasu.com Instagram : hi.nosasu
레빗 2025 신 기능 | 지형(Toposolid)관련 8가지 신기능 [What's new In Revit 2025]
มุมมอง 1.4K8 หลายเดือนก่อน
건축 실무 강좌 지형 굴착(Excavate)기능 추가 0:22 샤프트 오프닝 기능 개선 3:35 굴착된 포토솔리드 위 패밀리 배치 4:45 편집모드에서 스냅기능 추가 5:47 지형의 부드러운 음영처리 6:41 매스 면에 지형 솔리드 생성 07:05 편집 시 등고선 화면 표시 07:36 빌딩패드의 부활? 08:09 Software Version -Revit : 2024,2025 Information Website : digitaldesignforum.com Learning : nosasu.com Instagram : hi.nosasu
[다이나모] 파라메트릭 타워 디자인-1 | #dynamo
มุมมอง 723ปีที่แล้ว
[디지털디자인포럼러닝] 해당 영상은 "다이나모 입문에서 실무 활용까지" 커리큘럼에 포함된 강의입니다. 전체과정 보러가기 : bit.ly/3qfQDSU 프로젝트 정보 프로젝트명 : NEF Kagithane 03 디자인 : ADDON 위치 : Kagithane, Istanbul 관련 정보 -온라인 교육 : nosasu.com -커뮤니티 : digitaldesignforum.com/ -블로그 : blog.naver.com/digitaldesignforum -인스타그램 : hi.nosasu
Revit Tip | 레빗에서 꺾인 형태의 3D 단면 만들기!! (Split 3D Section Box)
มุมมอง 1.7Kปีที่แล้ว
건축 실무 강좌 Software Version -Revit : 2021.1.3 Information Website : digitaldesignforum.com Learning : nosasu.com Instagram : hi.nosasu
Revit Tip | 레빗 피난거리 검토하기!! (Path of Travel?)
มุมมอง 923ปีที่แล้ว
건축 실무 강좌 Software Version -Revit : 2021.1.3 Information Website : digitaldesignforum.com Learning : nosasu.com Instagram : hi.nosasu
Revit Tip | 레빗 스코프 박스 완전 정복!! (Scope box, What is it?)
มุมมอง 1.6Kปีที่แล้ว
Revit Tip | 레빗 스코프 박스 완전 정복!! (Scope box, What is it?)
Revit Tip | 2D 사람 패밀리로 단면도 꾸미기!! (Create interesting sections with the 2D Human Family)
มุมมอง 684ปีที่แล้ว
Revit Tip | 2D 사람 패밀리로 단면도 꾸미기!! (Create interesting sections with the 2D Human Family)
레빗 2024 신 기능 | 지형(Toposolid) 만들기 [What's new In Revit 2024]
มุมมอง 11Kปีที่แล้ว
레빗 2024 신 기능 | 지형(Toposolid) 만들기 [What's new In Revit 2024]
Revit Tip | 곡선 주차 경사로 만들기, 주차 램프 만들기 (Create curved parking ramp with structural frames)
มุมมอง 9Kปีที่แล้ว
Revit Tip | 곡선 주차 경사로 만들기, 주차 램프 만들기 (Create curved parking ramp with structural frames)
Revit Tip | Topography Cut and Fill (Using Graded Region)
มุมมอง 9K2 ปีที่แล้ว
Revit Tip | Topography Cut and Fill (Using Graded Region)
Revit Tip | Export Revit hatch pattern to CAD hatch patten
มุมมอง 2.2K2 ปีที่แล้ว
Revit Tip | Export Revit hatch pattern to CAD hatch patten
[Revit 패밀리 강좌] 템플릿으로 턴&틸트 창 만들기 | 다운로드
มุมมอง 2002 ปีที่แล้ว
[Revit 패밀리 강좌] 템플릿으로 턴&틸트 창 만들기 | 다운로드
[Revit 패밀리 강좌] 템플릿으로 프로젝트 창 만들기 | 다운로드
มุมมอง 7232 ปีที่แล้ว
[Revit 패밀리 강좌] 템플릿으로 프로젝트 창 만들기 | 다운로드
[Revit 패밀리 강좌] 템플릿으로 풀다운(틸트) 창 만들기 | 다운로드
มุมมอง 1882 ปีที่แล้ว
[Revit 패밀리 강좌] 템플릿으로 풀다운(틸트) 창 만들기 | 다운로드
[Revit Window Family] Create Casement Window with Template | Subtitle & Download
มุมมอง 4672 ปีที่แล้ว
[Revit Window Family] Create Casement Window with Template | Subtitle & Download
[Revit Window Template] Pull Down Window Family | Download
มุมมอง 1452 ปีที่แล้ว
[Revit Window Template] Pull Down Window Family | Download
[Revit Window Template] Project Window Family | Download
มุมมอง 2382 ปีที่แล้ว
[Revit Window Template] Project Window Family | Download
[Revit Window Template] Fixed Window Family | Download
มุมมอง 1302 ปีที่แล้ว
[Revit Window Template] Fixed Window Family | Download
[Revit Window Template] Casement Window Family | Download
มุมมอง 1472 ปีที่แล้ว
[Revit Window Template] Casement Window Family | Download
How to make haunch slab edge [ Q&A]
มุมมอง 8392 ปีที่แล้ว
How to make haunch slab edge [ Q&A]
[Revit Family #14] System Louver Window Type B| Subtitle & Download
มุมมอง 2402 ปีที่แล้ว
[Revit Family #14] System Louver Window Type B| Subtitle & Download
[Revit Family #13] Louver Window | Subtitle & Download
มุมมอง 4102 ปีที่แล้ว
[Revit Family #13] Louver Window | Subtitle & Download
[Revit Family #12] Double Sliding Window | Subtitle & Download
มุมมอง 3552 ปีที่แล้ว
[Revit Family #12] Double Sliding Window | Subtitle & Download
[Revit Family #11] Single Sliding Window | Subtitle & Download
มุมมอง 4222 ปีที่แล้ว
[Revit Family #11] Single Sliding Window | Subtitle & Download
[Revit Family #10] Pivot Single Door | Subtitle & Download
มุมมอง 2212 ปีที่แล้ว
[Revit Family #10] Pivot Single Door | Subtitle & Download
[Revit Family #09] Pocket Single Door | Subtitle & Download
มุมมอง 4722 ปีที่แล้ว
[Revit Family #09] Pocket Single Door | Subtitle & Download

ความคิดเห็น

  • @강성열-r6y
    @강성열-r6y 22 วันที่ผ่านมา

    영상감사합니다. 다운로드 링크에 주소로 들어가면 "Oops! That page can’t be found." 뜹니다. 재업로드 부탁드립니다!!

    • @digitaldesignforum
      @digitaldesignforum 22 วันที่ผ่านมา

      안녕하세요! 홈페이지 개편하면서 누락된 링크들이 많이 있는 것 같네요ㅜㅜ 조만간 정리해서 포럼 홈페이지에 올리도록 하겠습니다 :)

    • @강성열-r6y
      @강성열-r6y 21 วันที่ผ่านมา

      ​@@digitaldesignforum 감사합니다!! 가능하시다면 빠른 업로드 부탁드려요 🥹🥹

    • @digitaldesignforum
      @digitaldesignforum 19 วันที่ผ่านมา

      @강성열-r6y 포럼 홈페이지에 업로드 했습니다 확인한번 해보셔용~

  • @mofi3641
    @mofi3641 23 วันที่ผ่านมา

    what a waste of time.

  • @클릭-r5v
    @클릭-r5v 26 วันที่ผ่านมา

    이렇게 매스로 모델링한 객체도 재료수량산출이 나올까요?

    • @digitaldesignforum
      @digitaldesignforum 23 วันที่ผ่านมา

      안녕하세요 재료 수량 산출을 원하시면 벽체와 지붕을 활용하셔야 할 것 같습니다!

  • @MertoSan
    @MertoSan 28 วันที่ผ่านมา

    super thanx a lot

  • @JoaquinJVVentura
    @JoaquinJVVentura 28 วันที่ผ่านมา

    Hi can I have a copy of the script?

    • @digitaldesignforum
      @digitaldesignforum 23 วันที่ผ่านมา

      It seems the download link has broken since the website was renewed. The code isn’t very long, so you can easily recreate it by watching the video. I will remove the "Read More" link. Thank you for your understanding!

  • @airfortry
    @airfortry 29 วันที่ผ่านมา

    안녕하세요 ! 혹시 존별 지층 토공량을 구하려면.. 존별로 모델작성 방법 밖에 없을까요 ?

    • @digitaldesignforum
      @digitaldesignforum 23 วันที่ผ่านมา

      안녕하세요! 제 생각에는 말씀하신 방법밖에 없을 것 같은데요... 혹시 모르니 한번 테스트 해보고 포스팅 해보겠습니다 :)

  • @cgm-e5u
    @cgm-e5u 2 หลายเดือนก่อน

    찾고있던 정보였는데 감사합니다!

  • @자이-y8j
    @자이-y8j 2 หลายเดือนก่อน

    혹시 교육도하시나요?

    • @digitaldesignforum
      @digitaldesignforum 2 หลายเดือนก่อน

      안녕하세요! nosasu.com에서 레빗관련 온라인 강의를 하고 있습니다 :)

    • @자이-y8j
      @자이-y8j 2 หลายเดือนก่อน

      @@digitaldesignforum 참조하겠습니다

  • @janitraradea
    @janitraradea 2 หลายเดือนก่อน

    great

  • @자이-y8j
    @자이-y8j 2 หลายเดือนก่อน

    레빗있으면 굳이 캐드필요한가요?

    • @digitaldesignforum
      @digitaldesignforum 2 หลายเดือนก่อน

      안녕하세요! 레빗만으로도 다 할 수 있지만 작업효율등을 따졌을때 캐드가 필요한 경우 선택적으로 사용하시면 될것 같습니다 :)

    • @자이-y8j
      @자이-y8j 2 หลายเดือนก่อน

      @@digitaldesignforum 답변고마워요!

  • @킹민석
    @킹민석 2 หลายเดือนก่อน

    뭉탱이

  • @msk6239
    @msk6239 3 หลายเดือนก่อน

    좋은 내용 감사합니다. 혹시.. Revit에서 주차장 램프와 같은 원형 구조의 단면을 자를 때, 직각이 아닌 곡선 또는 원형 형태로 단면을 자를 수 있는 방법이 있나요?

    • @digitaldesignforum
      @digitaldesignforum 3 หลายเดือนก่อน

      안녕하세요! 아쉽지만 현재 레빗으로는 불가능합니다 ㅜㅜ

    • @msk6239
      @msk6239 3 หลายเดือนก่อน

      @@digitaldesignforum 답변 감사합니다. ^^

  • @자이-y8j
    @자이-y8j 3 หลายเดือนก่อน

    레빗으로 건축설계를 하거나 수정한 내용을 내역서로 옴길수있다고들었는데 그런영상도혹시부탁드려도되나요😂

    • @digitaldesignforum
      @digitaldesignforum 3 หลายเดือนก่อน

      넵 최근에 영상 업로드를 못하고 있는데 리스트에 추가해서 준비해보겠습니다 감사합니다 :)

    • @자이-y8j
      @자이-y8j 3 หลายเดือนก่อน

      @@digitaldesignforum 오!!기대하겠쯥니다

  • @leonardoacuebos174
    @leonardoacuebos174 5 หลายเดือนก่อน

    If nothing to say stop that shit sound does not help!

  • @msk6239
    @msk6239 6 หลายเดือนก่อน

    Q. 단면상자도 건물의 기울기에 맞춰서 수정을 할 수 있나요?

    • @digitaldesignforum
      @digitaldesignforum 5 หลายเดือนก่อน

      안녕하세요! 스코프 박스는 평면에서는 돌릴수 있지만 입,단면에서는 기울기에 맞춰서 돌려도 적용이 되지 않습니다.

  • @msk6239
    @msk6239 6 หลายเดือนก่อน

    강의 감사합니다. ^^

  • @vasubhadania
    @vasubhadania 6 หลายเดือนก่อน

    How do we use this family in a project or work sheet...!?

  • @이강수-y7w
    @이강수-y7w 6 หลายเดือนก่อน

    항상 영상 잘보고 있습니다 감사합니다

  • @Moosepindwalakafan
    @Moosepindwalakafan 7 หลายเดือนก่อน

    Brother I got this error while I practice with your video please help me 🙏🙏

  • @Moosepindwalakafan
    @Moosepindwalakafan 7 หลายเดือนก่อน

    Parameters fixed distance cannot be changed because it's defined by formula 1000 mm

  • @JoHyeongSeok
    @JoHyeongSeok 7 หลายเดือนก่อน

    하단의 모디파이 버튼이 활성화가 안 되어서 클릭을 못하는데, 뭐가 잘못된걸까요?

    • @digitaldesignforum
      @digitaldesignforum 7 หลายเดือนก่อน

      좌측하단의 뷰를 section: modify type으로 바꾸셔야 합니다!

  • @Moosepindwalakafan
    @Moosepindwalakafan 7 หลายเดือนก่อน

    🌹🌹👍👍🙏🙏 from India

  • @ThanhTrung_0501
    @ThanhTrung_0501 7 หลายเดือนก่อน

    Can I get drawhatch 12.5 lisp file? tks u

    • @digitaldesignforum
      @digitaldesignforum 23 วันที่ผ่านมา

      Sorry, I don't think it's supported anymore.

  • @JoHyeongSeok
    @JoHyeongSeok 8 หลายเดือนก่อน

    객체 선택 후 3d 뷰 한 다음, 다시 처음처럼 전체 3d뷰로 보고싶은데 어떻게 해야할까요?

    • @digitaldesignforum
      @digitaldesignforum 8 หลายเดือนก่อน

      안녕하세요! 특성창에서 section box에 체크를 해제하시면 됩니다:)

    • @JoHyeongSeok
      @JoHyeongSeok 8 หลายเดือนก่อน

      @@digitaldesignforum 감사합니다!

  • @salmamahmoud7755
    @salmamahmoud7755 8 หลายเดือนก่อน

    i cant find model category picker, can anyone help?

    • @digitaldesignforum
      @digitaldesignforum 23 วันที่ผ่านมา

      Sorry for the delay; it's now changed from "Model Category Picker" to "Built-in Categories.

  • @jp5862
    @jp5862 8 หลายเดือนก่อน

    늘 좋은영상 감사합니다!

  • @page_101
    @page_101 8 หลายเดือนก่อน

    안녕하세요! 강의 감사히 잘 봤습니다. 혹시 피난거리 태그를 걸려면 어떻게 해야할까요? 관련 태그 작성 방법에 대해서도 올려주실 수 있을지 부탁드립니다. 감사합니다.

    • @digitaldesignforum
      @digitaldesignforum 8 หลายเดือนก่อน

      안녕하세요 태그 작성 방법을 아래 링크에 첨부해 두었으니 확인해보세요 ! 감사합니다 :) digitaldesignforum.com/Forum_03/391

  • @DalilaFlores-kd9uw
    @DalilaFlores-kd9uw 8 หลายเดือนก่อน

    the "type" part when i clicked on generic models i didn't find the option "Dor Pannel" can somebody help me please

    • @digitaldesignforum
      @digitaldesignforum 8 หลายเดือนก่อน

      You have to make adaptive component first. Like this 0:10

  • @sim8973
    @sim8973 9 หลายเดือนก่อน

    감사드립니다

  • @kwangjohh
    @kwangjohh 9 หลายเดือนก่อน

    감사합니다. 원하던 콘텐츠입니다.

  • @Damitall-
    @Damitall- 9 หลายเดือนก่อน

    Do you have a video explaining the procedure on how you created this?

    • @digitaldesignforum
      @digitaldesignforum 9 หลายเดือนก่อน

      Sorry, but there are currently no related videos yet.

    • @Damitall-
      @Damitall- 9 หลายเดือนก่อน

      @@digitaldesignforum Dang. Thank you. Is there a way to purchase this script?

    • @digitaldesignforum
      @digitaldesignforum 22 วันที่ผ่านมา

      @@Damitall- Sorry, it is currently available only as a paid online tutorial in Korean.

    • @dimitriosk2219
      @dimitriosk2219 21 วันที่ผ่านมา

      @@digitaldesignforum Can you please forward to me the link for purchasing the paid tutorial in Korean?

    • @digitaldesignforum
      @digitaldesignforum 20 วันที่ผ่านมา

      @@dimitriosk2219 Please refer to this link : nosasu.com/product/dynamo-01

  • @노권필
    @노권필 9 หลายเดือนก่อน

    좋은 내용에 감사합니다.

  • @노권필
    @노권필 9 หลายเดือนก่อน

    멋진 팁입니다. 잘 활용하도록 하겠습니다. 감사합니다.

  • @mariabeatriz1389
    @mariabeatriz1389 10 หลายเดือนก่อน

    I can't locate the "buildpipes". Is this a pluggin? Or something like this

  • @RenderMaster
    @RenderMaster 10 หลายเดือนก่อน

    thanks for the tutorial

  • @siveribrahim-bf2lu
    @siveribrahim-bf2lu 11 หลายเดือนก่อน

    actually useful thank you

  • @seongha411
    @seongha411 ปีที่แล้ว

    감사합니다

  • @1insp3ru16
    @1insp3ru16 ปีที่แล้ว

    wowwwwww

  • @danielmichinnn
    @danielmichinnn ปีที่แล้ว

    Can someone share the grasshopper script please? And tell me what plug-in I need to download and maybe if you have the link for it? Thank you In advance

    • @digitaldesignforum
      @digitaldesignforum ปีที่แล้ว

      This is a plugin called Rhino-inside working in Revit. And you can see the script in this video. Thank you

  • @seongha411
    @seongha411 ปีที่แล้ว

    영상 속 파라펫 두겁 패밀리 파일은 어디서 다운받을 수 있나요? 혹은 어떻게 직접 만들면 되나요?

    • @digitaldesignforum
      @digitaldesignforum ปีที่แล้ว

      안녕하세요! 프로파일 패밀리를 따로 만드셔서 추가해야 합니다.

  • @anthonyirons6679
    @anthonyirons6679 ปีที่แล้ว

    잘봤습니다! 감사합니다.

  • @얼음땡0_0
    @얼음땡0_0 ปีที่แล้ว

    말씀해주신대로 벽체로 지형절단해보려하는데 절단 기능을 누르고 지형선택하면 벽체는 눌러지지도않고 절단도안됩니다 ㅠㅠ

    • @digitaldesignforum
      @digitaldesignforum ปีที่แล้ว

      혹시 2024버전이 맞으신가요?? 만약 이전버전 지형을 가져오셨다면 토포서페이스를 토포솔리드로 바꾸셔야 합니다!

  • @CENSORED_검열됨
    @CENSORED_검열됨 ปีที่แล้ว

    자료 감사합니다 덕분에 강박증이 해소되었습니다

  • @nelsonlee9003
    @nelsonlee9003 ปีที่แล้ว

    Hi, If i want to applied serval family into facade, how to make the componenet GH in RIR and thanks

    • @digitaldesignforum
      @digitaldesignforum ปีที่แล้ว

      If it is just geometry of Rhino not the Family of Revit, you can import it into Revit through the Direct Shape component.

    • @nelsonlee9003
      @nelsonlee9003 ปีที่แล้ว

      @@digitaldesignforum if I want applied family

  • @nelsonlee9003
    @nelsonlee9003 ปีที่แล้ว

    Great and useful, i expert you can provide created family for curtain wall turorial

  • @nelsonlee9003
    @nelsonlee9003 ปีที่แล้ว

    Great

  • @nelsonlee9003
    @nelsonlee9003 ปีที่แล้ว

    Hi, I can,t save the mass and use into Revit when closed the Rhino + GH, what can i do ?

  • @hanlee1602
    @hanlee1602 ปีที่แล้ว

    안녕하세요 혹시 model category picker가 나타나지 않는데 이럴 땐 어떻게 해야하나요?

    • @digitaldesignforum
      @digitaldesignforum ปีที่แล้ว

      안녕하세요 인사이드가 업데이트 되면서 노드가 많이 바뀌었습니다. built-in category노드를 사용하시면 됩니다!

  • @sahalbahabri9609
    @sahalbahabri9609 ปีที่แล้ว

    i the "type" part when i clicked on generic models i didnt find the option "Dor Pannel" what is the sloution?

    • @digitaldesignforum
      @digitaldesignforum 8 หลายเดือนก่อน

      Sorry for late. You have to make and load adaptive family first 0:10

  • @abrahaodeoliveira8899
    @abrahaodeoliveira8899 ปีที่แล้ว

    Could you tell me if there is a way to export a Dynamo animation like these from Revit to 3Ds MAX?

    • @digitaldesignforum
      @digitaldesignforum ปีที่แล้ว

      I'm sorry, but I don't know Max well. But if you want to do it in dynamo, look for Dynanimator package. Thanks :)