![Will in the Woods](/img/default-banner.jpg)
- 255
- 372 735
Will in the Woods
United Kingdom
เข้าร่วมเมื่อ 2 พ.ย. 2011
We live in the woods and we are keen on the wood.
We are also building a house in the woods.
We are also building a house in the woods.
วีดีโอ
foundation dig day 6 and 7 we finally get faster
มุมมอง 2778 หลายเดือนก่อน
After a very slow start we finally make progress at a better speed. The foundations will get dug in time for the concrete delivery if we can maintain the rate of digging. This has been a steep learning curve and the biggest single task on the digger so far.
hydraulic hose burst on foundation dig day 5
มุมมอง 1K8 หลายเดือนก่อน
We thought we were ok, then we had a massive hydraulic hose leak. How are we going to dig our foundations now?
foundation dig day 4 of 9 plant room sump and more strip
มุมมอง 2218 หลายเดือนก่อน
The Kubota U27-4 digger digging more of the foundations for our forever home selfbuild. We nearly forgot to dig the drainage sump for the plant room.
foundations day 3 of 9 made a decent start
มุมมอง 3432 ปีที่แล้ว
There is no stopping our Kubota U27-4 digger now. we are digging mostly to 700mm and progress is speeding up
digging foundations building inspector came
มุมมอง 1.2K2 ปีที่แล้ว
It has been 2 years since we took the roof off the old bungalow. The Kubota U27-4 digger finally gets to dig some proper foundations after the building control inspector has visited to give us an indication of what he wants.
finally digging foundations but run into a buried swimming pool
มุมมอง 7102 ปีที่แล้ว
This is it! Formal breaking ground day 15 May 2022. We already excavated a swimming pool here but it turns out that the foundations go a bit further than we calculated so we still ended up having to dig through a small part of them, making this part of the foundation 1.85m deep. We fell the destructive phase is over and are enjoying the move to actual construction. It has been 2 years since we ...
digging plant room slab to surveyed lines
มุมมอง 2532 ปีที่แล้ว
Now we have surveyed points on the ground we can finish the plant room slab to its final size with our Kubota U27-3 3 ton digger. The soil will provide the shuttering on 3 sides and a timber construction will finish the 3rd side.
adjusting the layout to match later drawings from architect
มุมมอง 522 ปีที่แล้ว
The day that the surveyor measured and marked all the points where the centre lines of the foundations meet the architect updated his drawing in a few crucial but thankfully minor ways. However, this meant we needed to move about 8 of the rebar pins.
surveyor marking out the foundations
มุมมอง 3592 ปีที่แล้ว
Before we dig our foundations we need to have marks for exactly where to dig them. The surveyor came today and measured all the points where the centre lines of the foundations meet. He hammered in short lengths of rebar so we can put up string lines and make paint marks to help us get them in exactly the right place. The outside of our building has 7 angles and only one of them is 90 degrees. ...
getting ready for the layout surveyor
มุมมอง 1342 ปีที่แล้ว
We are almost ready for the layout to be marked on our build area, but first we want to move heavy stuff with the Kubota U27-3 3 ton digger and make it all a but easier to work on by being all at the same level and free of junk. It was a wet day so I stayed in the digger a fair bit.
drive inspection by timber frame driver to see if waggon can get in
มุมมอง 742 ปีที่แล้ว
Our timber frame house will come on 4 or 5 11.5m flatbed rigid trucks stacked up to 4.5m high. The timber frame company were concerned about access so they sent one of their drivers to assess the driveway and approach.
digging small service trench for telecom & electricity
มุมมอง 5232 ปีที่แล้ว
We dug this service trench for power and telephone, but probably need to dig it deeper to allow for heat pipe to pellet boiler. We are self builders so quite slow and methodical due to lack of experience. We are also committed to removing plastic and other contaminants from the site where we can. This time-lapse makes sure it is not too slow to watch & my voice over hopefully give a bit of back...
plant room dig finds a large rock
มุมมอง 2322 ปีที่แล้ว
We have a big plant room that we are digging the slab area for today with the Kubota U27-3 3 ton digger. we dug up a fairly large piece of sandstone in the process. we are grading the area flat too using a laser level to get it horizontal. We are self builders so quite slow and methodical due to lack of experience. this time-lapse makes sure it is not too slow to watch & my voice over hopefully...
digging down site to final level & grading it flat
มุมมอง 4042 ปีที่แล้ว
Kaubota U27-4 grading a building plot including removing a lot of soil. The ground is quite hard with embedded stones so it was tough to get it as accrue as we wanted without a lot of hand work. would have been better to go down another 75mm and reduce the accuracy.
laying out the gabions and clipping them together first row
มุมมอง 13K2 ปีที่แล้ว
laying out the gabions and clipping them together first row
Gabions arrive and we start wiring up the corners
มุมมอง 9382 ปีที่แล้ว
Gabions arrive and we start wiring up the corners
servicing Kubota U27 4 air filters fuel filter and restarting
มุมมอง 1.8K2 ปีที่แล้ว
servicing Kubota U27 4 air filters fuel filter and restarting
servicing Kubota U27 4 engine oil and mess
มุมมอง 1.3K2 ปีที่แล้ว
servicing Kubota U27 4 engine oil and mess
servicing Kubota U27 4 changing gear oil in both drive units
มุมมอง 2.1K2 ปีที่แล้ว
servicing Kubota U27 4 changing gear oil in both drive units
Kubota U27 4 fixing track control lever limp
มุมมอง 3.4K2 ปีที่แล้ว
Kubota U27 4 fixing track control lever limp
cutting open hydraulic return filter from Kubota U27 4
มุมมอง 2122 ปีที่แล้ว
cutting open hydraulic return filter from Kubota U27 4
servicing Kubota U27 4 changing hydraulic oil and replacing filters
มุมมอง 15K2 ปีที่แล้ว
servicing Kubota U27 4 changing hydraulic oil and replacing filters
servicing Kubota U27 4 adjusting track tension
มุมมอง 4.7K2 ปีที่แล้ว
servicing Kubota U27 4 adjusting track tension
profiling a steep road with Kubota U27 4
มุมมอง 4962 ปีที่แล้ว
profiling a steep road with Kubota U27 4
Kubota U27 4 digs 8m x 5m notch into a steep bank part 4
มุมมอง 4202 ปีที่แล้ว
Kubota U27 4 digs 8m x 5m notch into a steep bank part 4
Kubota U27 4 digs 8m x 5m notch into a steep bank part 3
มุมมอง 1.1K2 ปีที่แล้ว
Kubota U27 4 digs 8m x 5m notch into a steep bank part 3
Kubota U27 4 digs 8m x 5m notch into a steep bank part 2
มุมมอง 7072 ปีที่แล้ว
Kubota U27 4 digs 8m x 5m notch into a steep bank part 2
Kubota U27 4 digs 8m x 5m notch into a steep bank part 1
มุมมอง 7922 ปีที่แล้ว
Kubota U27 4 digs 8m x 5m notch into a steep bank part 1
This is misguided… those are caliper guide pins. Not much torque to get them down for even wear. The caliper bolts are the ones holding the caliper in place for the brakes and piston to work. One of my caliper bolts came off today because I had a buddy work with on it learning how to change a wheel bearing… it was my fault for not checking the bolts after…
Did you get haribo
Thanks for sharing
Quart or gallon size baggie!? Maybe spoon it in.. zip it then cut a corner like frosting? Gonna try myself❤ Good Luck.. Ty😊
I am not a digger driver but have employed many to build tracks on my hill farm. I agree work from the top, but make the cut so the road is on the hard, the soft material gets pushed over the side. You don't make the road by track rolling the loose fill. It will wash away when it rains. Get down to the hard ground.
Dry your mouth out
My lower caliper bracket broke. I cant get one at work camp. Driving is my only option
Such a tease. Bravo. Where's the video of the next level?
Amazing solitary rock hiding away. Where did the rock end up?
What is the oil grade
Gabions definitely aren't the best. It's better to build a wall....
Great video
Why not use the excavator to dig then up to start with? I'm working on a similarly huge patch and have been wondering about renting equipment to dig the roots with.
Конструктора на мыло😂 , видео 👍 мы русские с вами но власти у вас тупые
Beautiful work! I see you have a hydraulic thumb on your excavator, did you make that yourself?
Just take the bumper off 😂
I don’t know how you do it so fast. It takes me ages.
Holy TIME WARP Batman ! ! ! Did we just jump 1 Year ahead to day 4 of 9 . . . I'm hooked ! ! ! SUBBED #483
The same thing just happened to me on the weekend. I had my brakes replaced at a shop, before a road trip, and halfway to my destination I heard rattling, pulled over and realized the top bolt was missing. It had rubbed against the inside of my run, since it wasnt bolted in place! The shop replaced everything for free, but could not figure out what had happened. Lol, what had happened was, you didn't put the bolt back in. Now that it's all replaced, I double checked it myself.
Sorry to hear that
What are u doing ?
Saving stone for another project and making soil easier to compact as backfill later. Easier without big stones in it.
Brother in law just bought this machine. Thank you for sharing all these videos!!!
Thanks for sharing
Did you leave the bark on? I thought I had to take it off.
I left the bark on. Falls off and looks untidy sometimes.
Bet that doesn't work on 30 year old cement lol
It was a very weak mix on bricks 65 years old.
Came looking for a vid on how to replace the pump and after finding your vid I quickly found mine was just blocked with the same gunk and the pump is fine. Thanks 👍
Thanks for the feedback.
Roughly what measurements are the mounts locations on the stick please? Pin centres if thats easier
Are you still after this info? If you are I can measure.
I was wondering this same thing as for some stupid reason mayo is literally _twice_ the price here when it comes from a squeeze bottle instead of a glass jar. Tell me that's not a scam. I bought a set of restaurant style bottles for all my condiments so they take far less room in the fridge with all their goofy shaped bottles. The thin sauces were simple as I just used a funnel but the mayo stumped me. I was already thinking of using a bag before I searched to find this. What worked best for me was putting all the mayo into the bag trying to keep it towards the corner, >>twist and tie<< to seal the bag, then just clipped a corner and squeezed it in like a baker's icing bag. Instead of using the straw simply squeeze the bottle to force some air out then place the bag on it and release the bottle as you squeeze the bag and you have both push and pull action moving it more quickly into the bottle. Keeps the neck from clogging up and stops the mess. Was still a bit clunky but now I have a tall skinny mayo bottle in my door instead of a fat short jar. Not to mention all the other bottles that were all different shapes and only partially full to begin with. 10 minutes of work freed up a good chunk of space in my fridge door.
We should be friends.
@@58wmh It's called being OCD brother. 😆
thank you for your help in posting this video
Kubota original filter are all very expensive, why isn't there a label from other manufacturers, at a better price? Air filter Kubota outdoor TC02016320- MANN FILTER C11003, Air filter Kubota indoor T027093220- MANN FILTER C6001, Fuel filter Kubota 1522143170- MANN FILTER WK812, Oil filter Kubota W21ESO1600- MANN FILTER W814/80, Hydraulic oil filter Kubota RC157-62190- HIFI FILTER SH60772 You save a lot of money and the quality of the filter is at least the same as from Kubota👍
Great video. I only get water through rear washer, even when I use the front. Am sure it's a blocked one-way valve. Thanks for showing how to access
Ultimate cottonmouth
Yeah I got 40 seconds in and couldn't continue 😢
This is NOT asmr
Thanks for the video, but you should disconnect the minus first in order to avoid a short-cut. As the minus is not reachable you can disconnect the minus located on the right side of the battery. The plus pole you disconnect as last and connect as first.
I think your thinking is the wrong way around, remove positive first, either way which ever way you do it there is always a risk to the electrics
@@alankalbarczyk4955 But with the Plus disconnected first you can easily get a short-circuit as the minus is ground and therefore the cars body... This procedure has nothing to do with the electronics safety but to avoid short circuits!
Do you have a part #
Is this in England ?
Yes in the southeast region.
Will, I really enjoy your videos! Thank you for sharing them with us and hope to see more soon!
Thanks Jake. I have lots of footage I need to make into videos, I have been struggling with it.
@@mikehinson5608 your welcome! I understand and hope that it gets easier for you.
Nice video but I wouldn't be doing it in the house. Too much smoke and too much mess
Thank you!
😂😂😂😂 what an absolute pudding why the fuck you drilling an hole in bumper 😂😂😂😂😂😂😂 who ever watches this and copy’s you then they need help like your self delete the video you cabbage
Fair play, this is very informative
Was this from digbits?
It was from www.harrison-industries.co.uk Highly recommend them.
Excellent - thank you.
Where can I order these gabions
We ordered these from www.gabionbaskets.co.uk
Drilling a hole in the bumper?
I thought it would help me get to a hard to reach bolt without taking the whole bumper off. It’s such an old car it doesn’t matter if it has a few holes.
Haha... doing the shortcu😂😂😂
děkuji :)
You are welcome :-)
really enjoying the u27-4 videos, thanks; did you get the 2.6-3.9t thumb, or the smaller one?
Hi, thanks for the encouragement. I haven’t made many videos recently but I have the footage. The thumb was supplied by RSL and was specified by them as suitable for my 2.7ton mostly based on the dimensions of the stick . I suspect it is the bigger one. It weighs 65kg and it would be possible to crash it into the boom ram. Now I am used to it I wouldn’t want it smaller, but I suspect the smaller one would be fine too.
I will go for the bigger one then; I have never been much of a mechanic, but your maintenance videos are quite inspirational; thanks
@@simpleman8374 RSL were very helpful and willing to chat if you need more info. My welder built a bit up on the edges of the stick to give more landing of the thumb when folded away, otherwise it was only half on the stick. The maintenance has been fairly straightforward I found. Always nice to have a hand from my brother with those jobs too. Good luck.
Super video. I was just doing a similar job on a floor. I used a long iron bar to do the levering which gave a shallower angle allowing access to lift the second and third boards. Now I can lift floorboards instead of making a video 👍
No
🅿🆁🅾🅼🅾🆂🅼
This dude has the most drone voice I have ever heard in my life
And the wettest