วีดีโอ

Get her up to higher rpm, she likes it more! Great little saw! 👌✨

I got one slapped a 28-in bar on it with a 3/8 pitch cuts through large cottonwood like butter waiting for the brakes I can buy the 500 I might be waiting forever 😉

Kubota parts are made in China. Think about that before you buy China-made products. I bought a Kioti tractor that is made in south Korea. I'm not sure how Trump's economy will affect imports from Korea?

You live in upper Michigan and you didn't get a cab!!!!😂😂 Damn you're a tough guy I guess?

You could save yourself a lot of time by not letting it auto return.

Thank you, very well explained for a newbie to understand which one to go for and which one works best for my needs. 👍

I have this same saw and it’s awesome.. however I wish I would have gotten the 400c.

Just found your video... Opinion of a guy who's been running a gasser for 8 years. Split wood under 20% is a must. If you have a small heat load increase your temp between on and off to get hotter longer burns(I run 172-192), learn how to clean your stove properly, there is no bad dry wood. I've been burning willow and pine for the last month. Doesn't last as long but works well in the bridge months. Won't run it when it's a high of 0 but why waste the good stuff on a high of 35. Thanks for the video!

DOESN'T MATTER BRAND NAME OF BOILER AND SO ON. WHAT DETERMINES HOW MUCH WOOD YOU BURN UP IS HOW WELL YOUR HOUSE IS INSULATED AND HOW WELL YOUR LINES ARE INSULATED...PERIOD

Thanks for sharing, it inspired me to do it on my own. Take care

how do you easily grease the rear drive line u joint of the rcf2772?

great video, do you have the top link measurements and what size of cylinder? thanks

i use my saw a lot to rip planks. lots of debris ends up in those tank areas. those fuel and oil caps areas are a bad design. getting the caps off and resting them against the body of the saw they always pick up dirt and sawdust. i use a short bristle paint brush but even brushing off the saw the recess around the caps are always dirty and crap ends up in the tanks. out in the field is hard to work around it. is there any better way to deal with the issue out in the field? thank you

No problems with traction?

Looks horrible

Just a tip. Before you remove the bladder, run a permanent marker pen around a horizontal bar at the height you want to cut the bladder. Will give you a perfect line to cut along.

If you mentioned it in the video, I must have missed it, but any idea of the total weight of the tote+firewood ? I do not have a tractor, but am contemplating getting a fork-lift accessory for my ATV. It's rated for 500 lbs., but I suspect we're talking about a lot more weight than that.

Mine came with some extra nuts, washers, and bolts, but without any instructions. There was a diagram on the side of the box that was adequate to figure out the install, but it would have been nice to be aware that extra hardware wouldn't necessarily be needed. No more trying to keep my saw between my feet!

Our Church is paying 3500.00 to have the lot sealed. The contractors NEVER EVER ACTUALLY SEAL THE CRACKS.NEVER. No body seems to realize that spraying a coat over the lot is not going to solve the grass and water going under the asphalt!

That cart is the exact same as the Gorrila cart, only difference is that you have 8 wheels and mine has 4 wheels. Great cart! Here in Canada they are sold at Princess Auto.

Thanks for the video, sir. One piece of advice: as a rule, you aren't supposed to use teflon tape on hydraulic fittings. Most don't require it, and if you do have a leak, use liquid teflon. If a piece of that tape makes its way into your hydraulic system, it can cause severe damage. Most people will go their whole lives without an issue. But if you are one of the unlucky ones, you'll never use that tape again 🙂

How long is the pole in total?

3:40 you're welcome

These hot crack filling machines are junk. Don't waste your money on buying g this hot crack filling machine. Instead buy a hot box 30 gallon. Get a metal galvanized flower pour bucket. Remove the sprinkler part. Use this to pour the hot rubber into cracks. Have 2 people v squeegee the cracks. Much cleaner job. Plus it is way easier to move around pour the hot rubber than a heavy awkward machine.

I'm not sure I would feel as comfortable placing my receiver at such an accessible level. I would want someone to have to work harder taking it and walking off with it than it did my installing it. Awesome job though and I didn't know about the Sika Pro either. Thanks for your video and post mix recommendation. God bless 🙌🙌🙌❤❤❤

I hate to look into your vacuum cleaner hose! Why don't you wash the saw with cleaning solutions ???😊 also brush away from the bar nose not into it

20 minutes? Could have been 20 seconds

I own a Kubota mx 5400 my self I love it my self

Each... are 50 THOUSAND BTU?? 😅 Are you sure that's a "shop" and not an oven??!! That small space doesn't look like it would need more than 30k BTU once up to temperature.

The non pinned one measures at deeper level.

What size hp tractor were you using?

Where did you purchase the bird guard? Tempest make them?

Thanks for the video and explanation. I believe the slight freeplay between the scabbard and the FEL is part of design, to cut down vibration on the saw while traveling over rough ground. Have you found that to be an agrevating distraction? Also, did you use their "standard" U bolt for your FEL or did you need the "larger" size? YourThank you

Thank you for the video. What size bolts did you end up using?

Now that it has been a year or so since you installed the pole and buried the cable, any updates or issues with your installation? How did your pole installation fare over the Winter and the Spring? Anything you would have done differently with your pole installation?

How deep of a hole did you dig for your Starlink Pole to sit in?

Air compressor….. and make sure you clean out the grooves/rails of your bar. And blow them out after and also the oil and grease holes.

Can you burn coal in a traditional or gasification?

Thank you for the video! How is the upload speed? Is it slow during over cast day days or rainy days?

Thank you Sir!

Is it normal for it to be leaking. Wherever I store the chainsaw there’s always an oily mess underneath.

Thank you so much for taking the time to make the video. Great tips! I'm new to the maintenance and this has helped to get me started. I'm hoping you'll be posting a season end video where you get into the nitty gritty of the maintenance process.

I'm tempted but a lack of a permanent display is annoying. The last thing I need is another app to have to look at to check stuff out. I've mounted my cheap station's display on the wall which is great for easy viewing. I suppose you could use a cheap or used tablet instead with Tempest, but yet another device to have to maintain.

Is there a reason why you didn’t get the MX6000?

Thanks for the info. I went tractor shopping this past weekend at my local Colorado dealership. MX5400 with loader $43,500.00 and MX6000 $45,500.00 😮

What type of tires are they? Solid?

I have a 2009 Johnson boiler I burn 12-14 cords per season through it. I want a 760 HDX bad but I got 2 quotes for $19,500 plus delivery and just cannot justify it right now. the Old Johnson burns a lot of wood but it would take me 10 years to realize that 19,500$ back on an HDX unit.

Cool! How long do the cracks stay closed before they re open and it has to be done again? When doing it again do you add more material or just torch the old stuff already there to reseal the crack.

About to upgrade my L2501 to the MX5400 ... this video was wildly helpful, thank you, sir. I am *extra* excited to have the extra lift capacity and MORE implements (ha!)

hi from iowa