- 85
- 162 733
Mad Builds 3D Printing And More
เข้าร่วมเมื่อ 24 ก.ค. 2022
I just have problems with my 3 D printer hopefully it's solved now
I just have problems with my 3 D printer hopefully it's solved now
มุมมอง: 282
วีดีโอ
Why can't I manage to print a good Ironman Helmet
มุมมอง 540ปีที่แล้ว
Why can't I manage to print a good Ironman Helmet
How do I have best set my temperature and Retract the PLA
มุมมอง 44ปีที่แล้ว
How do I have best set my temperature and Retract the PLA
I tried to print a 3d printed flying wing
มุมมอง 1.3Kปีที่แล้ว
I tried to print a 3d printed flying wing
How to remove my suport struts from my first 3d Printet Mandalorian helmet
มุมมอง 623ปีที่แล้ว
How to remove my suport struts from my first 3d Printet Mandalorian helmet
My first Mandalorian Helmet I have 3D printed
มุมมอง 129ปีที่แล้ว
My first Mandalorian Helmet I have 3D printed
Has all the work now been for nothing? Mandalorian 3D Printed props
มุมมอง 61ปีที่แล้ว
Has all the work now been for nothing? Mandalorian 3D Printed props
I 3D print my first slope glider and put it together
มุมมอง 10Kปีที่แล้ว
I 3D print my first slope glider and put it together
How to assemble my Mandalorian Blaster which I 3D Printed
มุมมอง 368ปีที่แล้ว
How to assemble my Mandalorian Blaster which I 3D Printed
Mandalorian blaster Cleaning everything from my 3D printed before you put it together
มุมมอง 116ปีที่แล้ว
Mandalorian blaster Cleaning everything from my 3D printed before you put it together
How I Measure With Mac Me Helmets To 3D Print So They Fit My With only Cura (scale up are down)
มุมมอง 524ปีที่แล้ว
How I Measure With Mac Me Helmets To 3D Print So They Fit My With only Cura (scale up are down)
My first 3d Prints Ironman Helmet in 3D on a Creality CR-10S Pro v2
มุมมอง 2.1Kปีที่แล้ว
My first 3d Prints Ironman Helmet in 3D on a Creality CR-10S Pro v2
My first prints with a 3D Printer What can go wrong
มุมมอง 64ปีที่แล้ว
My first prints with a 3D Printer What can go wrong
Unboxing my first 3 D printer and putting it together
มุมมอง 124ปีที่แล้ว
Unboxing my first 3 D printer and putting it together
Hola que impresora es?
The Print went very wel 👍👍👍
Imagine having a 3D printer without being able to slightly modify the file 🤦
I assume that if I have a file download that it is good so had nothing to do with whether or not you can work with a program and being able to modify the file
need to calibrate your printer's x and y maybe you should of printed a calibration cube first.
The Printer is Calibrate and works fine
Hola me encantan tus vídeos una consulta como puedo adquirir el archivo del modelo del casco! Espero tu respuesta un saludo!!
These helmets are for sale on various sites and there are some that are free
Thank you
👍
920 like🎉
Now 922 👍👍👍
Analytics!
👍
I adjust the speed so it's always slow on the first layer
Ok I gone try it thank you👍
Really cool!
thanks you
Ik hoor aan je Engelse accent dat je uit Nederland komt gwn typisch Nederlands Engels 🤣
Yes NL
@@mad-builds wist het gwn 🤣
@@Stef.0228 Maar dan weet je ook zeker dat het geen AI is he 🤣🤣👍👍
@@mad-buildsja 🤣💯
@@Stef.0228 soms hoor ik me zelf terug.Maar als ik het maakt denk je dat het goed is en dan na de hand als je het weer hoort oeps lig ik zelf in een deuk
Can you help me solve the problem, Raja?
What is your problem?
Hey I'm new to 3d printing and I got a Creality Ender 3 V2 and it works well with Printing the problem is when I try to Print something I created or something off of thingverse or Tinkercad the only thing I can print is the rabbit or the boat but for anything else It doesn't Print Even Though it Shows on the printer Screen It doesn't print but the printing time Moves but no movement from the printer i tried countless times and I was wondering if anyone knows the problem here if so please explain to me have a great day god bless
And what program do you use to put the fill on the sd card
Search "Enabling Ender 3 V2 Neo Model Preview With PrusaSlicer" Creality Experts has a good walkthrough to get those settings saved. Misunderstood your question. You will need to make sure the slicer is properly configured for your printer, so making sure it's on Marlin, the correct bed size, etc. You didn't mention any slicer, so I'm going to guess you moved a .STL file onto the SD card instead of a .GCODE file from the slicer.
Easy fix buy a better printer
😜🤣😂🧐Or stop printing😂😂😂
Add glue
and then which glue
My print got stuck to the extruder after (i think) losing bed adhesion. But since i just got the printer and it still looks very clean u doubt that
👍
How did you remove the lens? Did you need to disassemble the camera?
you can just press the lend with your finger and unscrew the lens and you don't have to damage anything
I did take the camera off the wall for a moment
I cannot get my lens to turn. Did you go counterclockwise or clockwise?
Hi bro can you give the link please
I ordered a few and fit used the rest sent back
Kafuty CCTV 3MP 12 mm Lente de Tablero de Distancia Focal Piezas de Repuesto de vigilancia Inteligente para cámaras de Seguridad Compatible con HD Pi
Lente de c¨¢Mara CCTV Fisheye 5MP M12x0.5 185 ¡ã Gran Angular 1.7 mm Lente Focal de Seguridad Focal para c¨¢Mara de Ojo de pez
Kafuty 1.56mm f / 2.0 5MP HD Lente Ojo de pez 1/2.5 Lente de cámara Profesional Gran Angular de 180 Grados con Hilo M12 para cámara de vigilancia CC
Hoe kan je cura naar nederlands overschakelen?
ALs je Cura opent dan ga je naar links boven Preferences dan klik je op configure Cura dan opent een tabblad dan kies je algemeen en daar kun je te taal veranderen
@@mad-builds aaaah top thanks👌🏻👊🏻
@@vtowndegekste 👍
How did you unscrew the old lense out? What lense did you purchase on amazon...can you give me a link?
If you press a little on the lens with your finder you can unscrew it. I ordered a few until one fit the rest I sent back.
My CR-10S Pro also loves to find new opportunities to stress me out >.>
hahahahaha Here the same
Happy you are back 👍
Thank you Travis 👍
Can put let’s us know exactly how and where you purchased the lens because I had to buy a an entirely new camra
I measured the old lens and then ordered a new one from amazon with the af measurements
I have spent an hour looking for replacement lenses on the web. Can you please post a link for the lens?
I measured the old lens and then ordered a new one from amazon with the af measurements
Thanks, but at least Switch it to english.
they are all in the same tracking order so that should work next time I put it in english
Hey I know it’s been like six months that you made the video and they don’t have the file for free anymore. Would you mind uploading the files so that we can get it for free?
Sorry I am not going to share files that are not mine if you want the file send an email to DO3D I am sure you will get the file from them 👍
Nozzal tem set to 210 & bed tem.set to 45 in pla for any hassle less print
Ok Thank you for the tip
Wait, a lower temp for the bed?
@@ghguyrur7 try it but apply with gluestick 👍
@@H3dTechnologydo we lower the temp with a glas bed and pla? No glue ?
whichever work for you is good. but use prusa slicer will be alot simpler . you can cut and add dowel too
Thanks for the tip B3D 👍
Ummmm
Hi Ashley Ummm is good or not good
Does this settings go to the flashforge adventurer 3?
He Dany i dont know
Hey, is this also good for the anycubic kobra 2? Aub een reactie! Bedankt
I wouldn't know that you would have to try this is only for Cura
Mine doesn’t work, it won’t open idk why
there is a new update
@@mad-builds i just had to download a previous version cause the current one isn’t compatible with my mac
@@digregoriocarlottaa1436 I have a Mac M1
@@mad-builds check online the compatibility of ur sistem with the version of cura
@@digregoriocarlottaa1436 I do find that cura crashes often
Yeah man precies you know de manier that it is werken
hahahaha thanks
Thank you
🎉👍
I just use tape, its just barely working on my prints, and i mean it. Its just good enough, also its kinda cheap, not glue cheap but its good.
Ok thank you
I did that for a while until I got the settings right. Now I don’t need anything on the bed at all ever. Make sure your filament is dry as can be even pla benifits from it. I can pick any print and just print. I got it pretty hot in my house too that helps. Ac is out. Do an enclosure for abs petg if it’s too cold in the house. Level bed get z offset perfect. Clean bed really well.
I bought biqu B1 SE Plus...it came with Cura 4.8.0. what's the latest version o can use with this printer? Does it matter? PC is a Lenovo Yoga 730. Core i7 ⁸⁵⁵⁰u @1.8 GHz 2.0 GHz 64 -bit x64 Windows 10 home version 21h2 Experience pack 120.2212.4190.0
Cura is free and its now 5.3.0 and Cura is for Pc and Mac Cura is working beter om PC
Thanks bro
thank you
Bravo. Perfect
Thank you
Do not used the textured side of the glass bed it is a nightmare to get to stick. Flip to the smooth side, clean with alcohol and try to print it will stick much better. Clean a couple of times if it still wont stick.
Thank you for the tip
Use glue
Thank you for the tip
@@mad-builds yeah I always use non toxic Elmer’s glue sticks so it will never come loose.
@@jojodogwater Ok thanks 👍👍👍
@@jojodogwaterI use the same glue. Have my initial layer height set to .2mm and layer height set to .24mm I’m using a .25mm nozzle. My prints still won’t print and just string out mid air like in the video. Do you have a fix for this? I’m using PA6-GF30
@@dev3022 I mean you could maybe try adjusting the heat? I’m not 100% sure because I have a bit of a different printer than you
good work . but make video for that is very batter
I'll think about it in the next video
Didn't know that was in there, tnx. :)
Neither did I until I tried to solve the problem, from there this video
Hi, do you have a link for the part, it's not coming up in Amazon USA
www.amazon.es/dp/B07VXHNN89?psc=1&ref=ppx_yo2ov_dt_b_product_details
I have ordered a few different ones and returned what was not good
@@mad-builds thank you
@@Shangoof Let me know if it worked out.
@@mad-builds the link you sent is currently out of stock but I'll try to find one with similar specs hopefully it will work, thank you again
try using prusa slicer and fix the stl file
ok thank you I'm going to try that what about the settings of that program
Try printing the helmet upside down.
I have tried but then again there are things that do not belong there
Bro speak clearly
Yes thank you
@@mad-builds sorry for being rude I've must've had a bad day,
yes, your hands are growing out of your ass!!! the printer strips, and the gluing curve!
Awesome
yank you
Check for voltage at the z axis motor
that was ok i took the sensor apart and there was the problem thanks for the tip
Wow that's very cool
thank you
Hi! Can you share files for printing?
the fils are on this site www.thingiverse.com
@@mad-builds Thank you!