วีดีโอ

Quick question what brand of cv axle did you use on the ram

Do you remember how many miles were on the Jeep cherokee when you changed the plugs?

Should be a recall

Did you use the same screws to screw in the j channel?

Your video is not flashy but that actually made it very useful for me thank you.

Would a '19 ranger be the same thing?

Thank you so much , what is the part ?I can search this part on ford official website

Looks like this was 3 years ago. How's it holding up? Did it work out okay without the cleanouts at the downspouts? Thanks.

BEAUTIFUL!!!

my spark plug broke @ 18ft/lbs reinstalling a used but in ok condition one. I think the specs for the upper manifold are only 89in/lbs according to jeep service manual. overtime they get stuck in there so not reliable to use the torque amount to take them off. its a pita to get them off if they brake inside the cylinder.

Thanks so much for making this. Not much out there for 2019 F150.

usually those iridium plugs come pre gapped and they say do not gap cuz i suppose you can damage them moreso the iridium part

Awsome bro thanks !!

Looks great. We are just building a new garage/shop and am leaning towards metal cladding. Only concern I have is hanging cabinets or storage shelves. Did you use spacers or what have you used ?

THANK YOU, I just finished and your video was SPOT ON, again THANK YOU

Very Detailed the only person i found thus far that demonstrated correctly how to remove the wire. Great job. Thank you!

Hope to hear about your tune. Following

Liked and subscribe already... soon in. I have same specs of the problem on mine.... following. Will let ya know bud

Thank you this is helped tremendously. I just recently came across this problem in my truck and it’s also a 2019.

Thank you sir- can’t be easy doing all that while making video. Contemplating same material for new shop. Concerned that it will be a pain to bolt wood shelving to though…

Looks great we are in process of starting ours but on the floor is the wall liner going into a J channel. We ordered our wall liner and all materials along with insulation from the place that built the polebarn. Saving thousands doing it ourselves. I am concerned they did not give us enough J Channel for the bottom.

thats a big shameeee

You will notice better mileage after the swap 😊

Do you not have to use a vacuum pump? I seen some videos where they do and some they don’t? And great video by the way

Just read the comments after watching the video. I typically feel pretty comfortable with most of the repairs I've done on my own, but this kind of scares me. 😔

Looks great Jello!

Agree NO PHILLIPS!

Code is 3 ft. from electric meter and 2ft. Under ground. Also, DONT bury until pressure tested. May be a pin hole in pipe itself?? And if it wasn't buried, you could pull the pipe above ground to put the fittings and corrosion tape together. The gas line should be run totally, thru the wall and shut off valve installed so all that needs to be done, is connect the fixture. Also, the pipe needs to be sleeved thru the wall. Just a thought!!??

Getting ready to do this repair myself. Thanks for the video!

Are you fckin kidding me...all this to change spark plugs!

I have a 2018 I've had for over 2 years. Put brand new Cooper Discoverer tires on over a year ago. Now I'm hearing "road noise" sounds like a mud tire. I'm assuming it's the hubs. Is that the sound they make when going bad? The tires seem to wear uneven so I had them rotated and it still makes the noise. Also, if only 1 hub is bad should i still replace both or just replace the bad one?

Awesome video. Thanks for sharing. I have a ‘76 Stingray that I am about to drop in a 383. I have the complete Holley Sniper infection and ignition system. Your video is very informative.

Can you give us an update on how this affected your hunts?

Cool video. Nice setup too.

Enjoyed this video. I like the way you presented it and how you got through it.

"Ford knew nothing about the problem". I work at Ford Truck plant. Bought new F-series every generation since 1989. ALL of them had rear window leaks. My new one this year: rear window leak. Ford Dealership solution? "Park in Garage. Don't drive in the rain." Wow. Can't wait for the new Silverado.

219Jello - Nice going . Easy to follow . --- Jim

How many gallons sap per hour you can evaporate?

In the 4 months I've owned my '19 f150 super crew, I've had to get the panoramic totally gone through to eliminate the grab handle pee'ing on my while driving. I still have a wet driver side floor weeks after their "fix". They're charging me for another visit. They assured me they checked my transmission which has several times failed to go into reverse resulting in the truck rolling forward (backing up the driveway) and almost hitting my wife's car. I'm over $500 into FIXED and still have a wet floor. At least the transmission hasn't acted up since the last visit.

Thank you

How many miles on this 2019 ram when you had to replace this cv?

You deserve 10 thumbs up for having the patience to figure that out. Good work hopefully mine doesn’t drive me crazy too. I ordered the xflow 800 and I’m running it on a sbf with a centrifugal supercharger. Holley has a big sale going right now so I got a really good deal on it. Hopefully.

If you run into the problem of not having the right spark plug puller you can always use the coil pack to pull the plug

Another tip, take a vacuum and and give it at suck at that drain to clear any debris

Thanks for the video. I have the same problem, but I know it's rain water. Do you know it the same spout is used to drain rainwater?

Thank you! This is what I needed I was just getting ready to change mine and this is much better than guessing.

Looks good and I bet it works good too. Why not just slide the pan towards the front by a couple inches, cutting off the round front so it has a flat spot on the top? Put an angle steel bar on the barrel at the top and then you'd only need to do the flat seal at the bottom of the pan. Bonus, the chimney could be moved u a little bit on the back, which would improve the air flow.

Interesting video. Thanks. How were the threads damaged originally. Mishandling ?

Cross thread or not... tight is tight lol.

subpar junk the TPS won't hold the setting under engine compartment temps so it will limp around FUBAR from day 1 they have been selling trash systems for too long hater rant over