วีดีโอ

Did you just buy the drag car?

What is the range you got?

You just need about 2400 volts in the right spot. Not to difficult.

WOW! Thanks for a great video. I love your shop. Carry On.

Lol yep you Caught the hot rod 😂

That's good idia tire in the back for balancing skid steer.

Ahh transfer punchs one of my best purchases, and dam them skull sheilds had been quit popular for a few years. Any one still see them on jobs sites?

Are you from the Kearney area? I swear I've seen that plate before.

Don't chuck on the OD of that hub. Need use the bearing bores...i.e. the running surfaces. Then true all the features to the bearing bores

Love it

i got to flip the compressor motor out to tighten up the belt, so it starts the motor. then flip it back forward, so the belt comes off while its running. let it run for a while, to warm up, then kill it.. only tried pullin the belt off while it was runnin and got the black fingernail, before the one i got now.. amazed i still got all my fingers... when it gets nice again, ill post a video of how it works. i see i got a butt load of views, on it...

Imagine if you put that electric starting motor on a hinge with a handle sticking out, you wouldn't risk your fingers so much

I love it!

Thanks for the video. Cool project but we wanted to see your bobcat in action

Looks like a fun little project. Nice work.

Change your helmets personality..

The project looks good

Your a good engineer. Planning ahead for easier repairs in the future. Give yourself room to remove things when needed.

You may be a great mechanic, but it is hard to tell because you are a bad videographer. No offense intended. I would really like to see what you are doing. Whatever that thing is, it looks interesting.

I’ve seen worse

That tungsten needs some grinding jeez

Unless you had it reverse polarity, it fucks up the tungsten. Sharpen it to a point PARALLEL to stablize the arc and dont dip it in the weld pool. I jabe done tig mig and stick. Tig is def the hardest but makes the best welds. Theres just a lewrning curve. You need to practice not contaminating the tungsten. Make a bunch of them. Take a brake and sharpen them all.

you can go direct to the transmitter with the antenna. it comes with an elbow with a sleeve that locks it straight or slide it off the elbow and it will angle up. still needs to the proper length for the frequency, that you pick... seems to transmitt a little further, using the black cable, especially if you can go up high with it, like into the atic and out on the roof through a vent or pvc pipe with an elbow to keep the weather from getting into the atic.. if you turn the transmit dial, higher,, go for a ride in your car and have somebody play with the power knob, so you can tell them, where it distorts.. .. mine distorts if i go past half way, so i have it set about the 11 oclock position, and gets out half to close to a mile, line of site and sometimes, further, but then, i have to have it on mono, or it fades in and out on sterio.... now days, it seems there a lot more fm stations to deal with, so get in your car or somebodies car, that has a really good fm radio and hit seek and write down all the frequencies it stops on. then pick a frequency area that has the biggest gap, between stations, and dial your transmitter, to that frequency.. i had to move mine twice, to avoid interfeering with other stations that have a lot of power.. also, remember, all fm stations, in the usa, the frequencies all end with an odd number after the dot,,,, like 95.1 or 95.3... these transmitters can transmit on odd and even numbers. not sure if other countries, operate that way, or not... hope this info helped, answer your question... remember to measure the length, for best output signal...

Can you use it without the base, connecting the antenna directly to the transmitter since it is 15 watts?

Here is a easy way to know how long yoour antenna needs to be. m0ukd.com/calculators/quarter-wave-ground-plane-antenna-calculator/

HELLO FRIEND , YOU HAVE PICTURES OF HIM OPEN , YOU KNOW WHICH CI USES , THE PLL .. GRATEFUL

I had a problem with mine if i set the dial to 94.4 i find i am also broadcasting on 92.7 and 89.0

wow this is like a blast from the past...look at that phone. does this unit have bluetooth?

Ihave one i ordered 2 different antennas and they have a wrong end on them. Helpp

Thank you, Thank you!! Your presentation is great and really answered many questions I had.

www.aliexpress.com/item/32881294451.html?spm=2114.12010612.8148356.15.16b967d7et5lZl

www.aliexpress.com/item/32881294451.html?spm=2114.12010612.8148356.15.16b967d7et5lZl

buyer linker: www.aliexpress.com/item/32725169039.html?spm=a2g0o.productlist.0.0.347a3621bdDtNC&algo_pvid=4bc13fc7-aae8-462d-85af-ce840a3dbcce&algo_expid=4bc13fc7-aae8-462d-85af-ce840a3dbcce-1&btsid=0bb47a2215920920598585412e0ac6&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

SAME OLE CHINESE JUNK, BOUGHT TWO, BOTH CRAPPED OUT WITHIN A FEW WEEKS

Interesting the 7 watts one I have has none of this you just set the aerial and use it. good videos

We are setting up an fm transmitter for our church to have drive in style service. Thank you so much.

I use a CZE Transmitter to cover our park with my Smooth Jazz Internet Radio Station at 969theoasis.com. If you run it at 15 watts with an antenna up on an antenna mast outside you can run 15 watts. If you do that depending on how high it is it can get out as much as 20 miles! If you run it at 15 watta inside you get too much RF in the room. I know because I tried it. Watch out with the 15 watts. I was running 7 watts and got a visit from the engineers in town from Alpha Media. At least they weren't the FCC

thanks for making these videos - I just ordered this transmitter and I"m going to try to use it for a drive-in church service that is CoViD-19 social distancing compliant

15W FM transmitter: www.aliexpress.com/item/32881294451.html?spm=2114.12010612.8148356.9.468467d7HQWiZF

The same website can save you some time. It lists all of the unused frequencies in your area as well.

How is this transmitter working today? Do you still like it?

I like to watch these videos and I'm glad to see people are still buying these FM transmitters. I see that they've really come a long way. I have one but I'm not sure of what to do with it.

Retekess TR502 | How does the PC control software work for you? What software do you use? ..... How to video?

PC control connect your computer by USB supporting intelligent broadcasting software;achieve diversification unattended broadcast; You can connect wireless to mobile phones; tablets and other wireless devices

Thx!

Thank you