วีดีโอ

Thank you!!!

Thanks man !

Thanks for the tip! That tile is gorgeous though, I can't believe your ripping it up.

Excellent video. Better than most on you tube.

Outstanding, thank you

Where do I purchase nipple nippers ??

THANK YOU!!!!

I wish you lived by me!! I’d pay you to fix mine!!

if your leak sensor is triggered by accidental water spill/accumulation, and there is no real leaks anywhere, i found the easiest way without flipping the machine and removing the bottom panel, is to remove the side metal kick panel on the right(two screws), that'd give you enough clearance to reach beneath the sensor with your hand(unless you have a giant hand), use paper towel to dry most of water, this should be good enough to stop the flashing alarm. Then use a hair dryer blowing it with cool air for 5m will make it perfectly dry. Enjoy!

There was a problem with the tail light seal in the MLs and rear sam corrosion is common.

Thank you, I followed exactly what you did and fixed my issue.

I’m having the same issue…my dishwasher is less than 2 years old. I have a Samsung refrigerator with water and ice in the door…the ice maker stopped working within a year… a design flaw I was told?! I was never compensated and buy bags of ice now. Even my new X-ray equipment is Samsung … I no longer buy Samsung ANYTHING. Its ALL JUNK

Does anyone know about flashing express 60? I can’t find videos on that

Thanks man, very helpful video.

Thank you so much for making this video. I was able to fix my dishwasher. Thanks again.

dude, any time you in my town, beers on me. I tried everything, taking everything apart, cleaning it out, flushing it out. This did the trick instantly. thank you

I tried this but only fixed it temporarily does this mean I need a new dishwasher ?

Fixed my error without issue. Thanks for the guidance 🙏

HEYA!! I just used this to fix my Moms unit. 100% no cap - directions are 100!! Thank you for saving me hundreds in a service call!!

Thanks u helped me save about 300 dollars buddy on point

Genius

I found this very helpful but I’m still struggling and I cannot afford a repairman. Am I not drying it fully? It resets when I turn breaker back on. Begin to run load, hear water entering dishwasher, trips the error code immediately. Please help :(

I've gotca pair of nipplnippers!

I broke my drain. What do I do now?

Great information, I appreciate your video on this. You saved me a ton of money on repair. I kept plugging and unplugging my dishwasher to reset and the same problem with blinking heavy light and drain constantly running kept happening. I found your video and exactly the problem I have. Thanks again for your time on this. Take care.

Can't thank you enough!! Excellent video!!

Thank you

This was extremely helpful, thank you for taking the time to post. Part of the difficulty of fixing things is not knowing what you may be looking for or challenges you may face (where is that screw?), so having someone patiently record the process makes attacking the challenge so much easier. Once again thank you.

I'm using this to tighten drain on a new shower kit. Thanks

Thank you very much for taking the time and providing this information. I had the same code. I followed your instructions and fixed the problem on my Samsung dishwasher. 👍

Dude this worked thanks 🙏🏼

Thank you. It went just as you showed.

Super easy to follow and TOTALLY saved myself a repair visit. Thank you for empowering some DIY work!

The leak is coming from the tail lights, around the taillights there’s no seal or gasket, and the water just starts little by little leaking in, I thought it was the sunroof drains which could happen, however in my case it’s the taillights seal, which what I say, nothing that a little clear silicone can’t fix.

My clips needed to be pushed out NOT in to remove the motherboard....

Did cleaning the board work?

Thank you! Very helpful. Perfect instructions and it worked perfectly. 🏆

Excellent video. I was about to buy a new dishwasher but decided first to look for a solution on youtube and came across your video. Problem is fixed thanks to you. A million thank you’s. People like you make the world a better place.

Great video on step by step instructions, also cleaned the filters while we were in there. This is a good maintenance practice. Thank you!

It works now! Thank you!

Why would I get flashing lights for WASH and QUICK and the water won't start running. How should I fix it?

thanks for the help bud, i was fixing a blinking code for heavy and normal blinking codes, followed the advice of a youtube video there and when i put everything back i got this blinking code, basically the run off water got into the bottom and i had to drain the water and it fixed this problem. thanks again

Thank you very much 🙏🏼🙏🏼🙏🏼 i had the same issue solved in 30 min

Life-saving* video! Needed this after doing the water wall cleaning procedure**...as enough water must have come out of the 4 hoses to trigger the base pan's leak detector. MANY THANKS! *Our dishwasher's life was in jeopardy when my first repair didn't fix it! **Ref: ApplianceVideo's "Samsung Dishwasher - Water drains out before wash cycle starts - Diagnostic & Repair

Great video. Helped with the stress.

Thanks for this video :D helped me a lot Trouble shooting the exact same issue. Fixed it in under 2 hours.

Do you think that with maybe a different base it would hold up outdoors, too?

Could it also just be a bad pump? My sensor is dry as can be

Thank you

Thanks so much for the video, fix worked perfectly, great tutorial and thank you for saving my family money.