วีดีโอ

Also i have seen where people go into the amp settings and change the mic level and positions... do you do any of that?

@@Daddybell6957 hi, yes. Happy I could help. With mic positions, don’t be afraid to play with it, the Sag, etc. It’s a great pedal, and very underrated.

@@Daddybell6957 I’m planning to make a video making a preset.

Someone else suggested the same thing, so I place it on the high gain side. It worked good for that, but I will play the threshold. Thank you

@@Daddybell6957the Pod Go is limited in it’s functionality and the me-90 is probably better for effects. The Gx100 is both for Amp Sim and effects and functionality, I don’t use amps for my live setup. The gx100 is great for all this.

me-90 is limited in fx-blocks too, not like the gx100 you can put 15 something effects in any order, and 8 i think with the pod go. The gx is a no brainer

@@Setha107 download the manual, shows everything.

@@peted450 Thanks

Make sure they are fully charged, put them in the case and start the charge. Both units should light up and then close the case. Mine last 4 hrs, and I’ve had them for over a year now.

AIO guitars look really nice.

Hi, just a setup. Very amazed with this guitar.

You were saying no xlr out, I have the fender frfr10 and it has a xlr out to go front of house. Just saying what's out there.

My high gain side I did added the noise suppressor. Someone on the channel suggested it, it was perfect. The lower or mid gain side I don’t put a gate or suppressor, when playing lower volumes it can start to cut the sound.

Yea, it’s a great pedal. Boss is really stepping up their game.

How do you copy/ paste patches?

I just got mine and am attempting the same idea.

@d.j.linhart935 whatever patch you want to copy, hit save twice, then your first knob under the screen scroll to whatever number you want to save the patch to.

@@d.j.linhart935 you can then have the dame patch across the whole bank.

What are you running it through?

@@peted450 Through the 1/8” output of the Microtubes x ultra pedal. Sent the NUX back for bad sound quality.

@@lumurumba when I first tried this unit I ran it thru my headphone output on my fender amp to test it, and it was noisy. I lowered the volume on the unit itself and it helped a little, but this isn’t how I intended to use it. When I connected it to the P-16 at church it was quiet, another musician uses it too and loves it also. If you still have the NUX try running it out of the mixer, or a personal monitor, like Axiom or P-16. Directly out of pedals or amps seems to exaggerate noise, almost like high gain distortion pedals. Hope that helps.

Running out of the headphone outs on a soundcraft ui24r. No issues at all. Only “noise” is my music 😇😜😂😂😂

@@FransJCMartins Glad it worked for you. seems to be a hit or a miss after looking at reviews. Cheers

Thanks for the comment, I am using two Edison Professional M-2000 Plus 15" High Power PA Speakers.

Hello, ok this is how… Pick channel you to make change, I do this to all my channels First: select CTL/EXP Next: select CONTROL FUNCTION under CTL 2( or wherever your tuner is) should be knob number 4 and rotate so it reads MAN/TUNER not TUNER/MAN. Exit it out and you should be all set.

@@peted450 Thank you very much.🤘🤘🤘

Hello, I use CHO not CHO PRIM TYPE MONO RATE 50 DEPTH 45 EFFECT LEVEL 85 PRE-DELAY 6.0 ms WAVEFORM TRI LOW CUT 200Hz HIGH CUT 3.15Hz DIRECT LEVEL 100 BPM 85 I have this set up with my amp settings so it might sound different in combination with your amplifier you have selected. Let me know if it works.

Hi, thank you. No, they is no option for doing that in the effects.

@@peted450ah ok thank you for your reply

I try to avoid noise gates, because I tend to play quiet passages at times. I don’t want it kicking in while I play, but the noise I experience is not an issue when playing live. It is a good idea for my high gain side, same as a real amp.

​​@@peted450if you put the gate on threshold 30 and release 30, it doesn't effect the quiet passages but it stops the extra noise. You just have to adjust it so it works like you want. It would clean up your sound a lot.

​@@peted450 Isn't the noise gate like the boss ns-1?

Hey, thank you, I’m not a fan of noise suppression, especially for medium gain sounds. My office tends to be a little noisier even when using my independent pedals into my amp. Live there is very noise, but you could use a noise suppressor. But, you make a good point, I could set that up for my high gain stuff.

The noise supressor built into the GX100 works well... I put it after the amp and it cleans up use of the OD1 or tube screamer really nicely. Worth experimenting with at least.

@@steved1099 I put the noise suppressor after the high gain channel, works great..👍

Hi Stephen, no, there is no tone loss. Essentially it’s equal to having headphones plugged directly into the P-16. What will affect your tone is the type of headphones. Your settings on the P-16 is important also, use the Mid and Frequency in tandem to change your tone.

Hi David, the sound quality is very good. It’s equal to having wired headphones plugged directly. It has plenty volume, currently I connect it to the Behringer P16. Another bandmate just bought it for himself and he loves it. I haven’t experienced any issues with the two of us using them together, they can run up to 10 at the same time. Hope that helps, and your very welcome.