วีดีโอ

Great question and I don’t know. I’ll need to find out

@@WootDini Thanks if you find out please let me know. I believe its in the bios and adapter settings.

So according to the manufacturer they say no. But I know wowlan is set up through windows which needs wol. Personally I have never seen wowlan in a bios before just wol

@@WootDinithanks for looking into it. I have wake on wifi on my msi z690i unify so I was curious if it would be worth swapping.

@@JulianRosadoRios ill check as soon as I rig it up again. But why swap? Its a completely different chipset. U wanting to go AMD?

heya :) what i say?

@WootDini it just Asus B850I board cost 500... ASRock B850I Lightning is only 300

I still have it so I’ll measure tomorrow:) please remind me if I forget

17x17cm

or did u mean "fatness"?

Appreciate you checking it out :)

I cannot comment as I can only go by the experiences I have or what my community informs me of. I have heard there are issues globally, but in my country (South Africa) the local office does well to handle warranty claims.

I dont have the unit anymore unfortunately so I cannot say :( I dont see why it would not allow Linux

That’s maybe my fault. I do translations of title, subtitles and description so it makes it easier for other languages to understand

Hey I’m adding subtitles in 10 languages. Will get to this one soon

To be honest the b650e-i It’s very similar in spec. But just check the PCIe versions etc etc. it’s gonna depend on what cpu etc u going for. But on the surface, that 650 sounds like a better deal

@WootDini thanks, i'm going to put a 7800x3d and a 5080

@@stefanocasarosa7822 you will be more than fine with B650 I promise. Same VRMs and 7800X3D is not taxing on wattage at all

@@WootDini ok, in a 9800x3d scenario? Same ?

@@stefanocasarosa7822 considering the VRM's are the same yes. BUT there are 3 things to consider 1) B850 will work with 9800X3D out of the box, B650 MAY not. Its not a major issue as you can do a powered off flash. 2) Both boards have PCIE5 (Not all B650 do but the one u said does). However, this is speculative but the B850 has support for ram at 8400 and the 650 only 6400. Nothing says the B650 cant do higher and I have many times clocked over board max. But its not "Supported" on the B650 over 6400. BUT 6400 is more than fine currently as past 7400 starts to go bad on most boards and the B850 is included in that equation. 3) This is an expansion on point 2 but BIOS. ASUS will be more likely to support more stable on the B850 as its a different chipset and more effort will go into that BIOS which means you will be able to get better stable frequency THEORETICALLY. Manufacturers want you on the latest. I think B650 (that specific model) will be more than fine. But if you are worried about future RAM then go 850. But I do not see the requirement for 9000 Series going over 7400 before 10000 series launches. If it was me, I would go for 850 if I had the money and was going to 9800X3D but I dont think the B850 or the B650 is the right board for the 9800X3D. Go and watch my video on 7800X3D vs 9800X3D. VRM's are going to be a big factor as 9800X3D produces more wattage and heat which is a big consideration on ITX builds. Personally I would go 7800X3D, B650 if you are just gaming (mainly)

I will have to ask. Mine was not a production unit as far as I know, but rather a pre production sample

Hey In the app or the signal ? If it’s the app, go to your WiFi signals and try find the signal there and connect to it

@WootDini I Will give it a shot, btw yes, my phone cant find the extender after all what I did, but I Will try what you just said

Enable both 2.4Ghz and 5Ghz bands, your phone will connect to 2.4Ghz easily.

Heya Thats going to depend on the game. Laptop CPUs run high naturally so I would not be too worried about that. To take off strain from the CPU (Im not sure if this will work), but try change the render resolution. What this does is take stress off the CPU generation Q and put it on the GPU load

heya to make it easier and understandable for all it was just straight expo/xmp. As the RAM was rated for 8000MT/s I did not have to play with additional settings

@@WootDini so it was auto. im curious if the motherboard defaulted to gear 1 or 2. some motherboards on auto will default to gear 2 the moment you go over 6000(like mine for example). to use gear 1 above 6000 i need to manually set it on the bios because auto is gear 2 when over 6000. eitherway good video. this is the first time i saw someone test 7400.

@@cant_Comment let me check for you I still have it set up but at 7400 im sure it will be 2 PS: On ASRock Taichi Cararra I hit 8000 "semi stable"

literally checked everywhere and unless im loosing my touch, Gear was taken out in this chipset or at least on Giga. I checked advanced, UMC & MRC and nada

@@WootDini gear 1 is uclk=memclk, gear 2 is uclk=memclk/2. 7400 should be gear 2. on my board(gigabyte) auto defaults to gear 2 when i try 6200 or 6400. i had to manually set uclk=memclk to run 6200 at gear 1. unfortunately, my ryzen 7600 cant do 6400 gear 1. sad

Thanks for that :) Yea would love to be able to do more in depth but the problem for me is always time. This channel is now my livelihood (and the production I do for clients), so being able to get to every nuance as a single person is close to impossible.

Im here Message me on social media as seeing the replies here can be tricky

I cant wait :) I just wish we could see ram impact and more stability

I heard that the 780M still will be the iGPU in the next gen CPU. AM6 will have new better versions because AM5 is limited with DDR5

@MotoMario1 The 40 core part is what I am referring to.

@@robertmyers6488 Strix Halo so to say. It will only be available with LPDDR5X RAM, so no AM5. Just mobile.

@ Called Strix Halo yea

You are most welcome!

it will 100% improve your performance :) it wont be "faster" but it will be more stable

@@WootDini does it fix the 100% disk usage? sometimes it happens and slow down my pc a lot. like when installing a game.

@@vincenzuu Its should yes. Remember a HDD is spinning all the time and looking for info in different sectors. I can guarantee that the SSD will be a positive impact. I put a link in primary comment for where you can get (please don't feel obligated and get it where its most convenient, its just my Amazon affiliate store link)

@@WootDini i already ordered it online and waiting for it to arrive, i hope its good.

@@vincenzuu let me know :)

worth every penny

Most welcome :)

Nothing notable from any components.

Heya Try set it up with a short cable closer. It could be the cable

Niiice!

Heya You have to update the firmware then do a soft reset. It will be there after

I’m glad I could help :)

The difference won’t be huge don’t worry 😊 5600g is a great processor

you are right. Unfortunately Nikon is still a camera company so these improvements and ease of use will take time. I do hope the video helps

Sure, your video is helpful and informative, but Nikon and other companies should work on it, especially now when DJI in September is coming with a camera which I’m sure will simplify all these functions. Technology is there, just no push from photo community.

@@voytekj7420 You are correct and DJI with LightCut is so far ahead. Lightcut even makes videos for you in the background.

Heya It should be standard like that. Xiaomi does not have many abilities for fine tuning but 40 is default

Hey So if ASUS kills me its your fault But I opened it up quick Its a 30mm and replacing it should be easy enough. There is just some AS tape that keeps it attached. Ill put some pics on my social media for you

Hey Unify Picks up Mic automatically as its only select mics that have a chip on the PCB allowing Unify to recognize it. So I cannot do that section in reality.

Can you do a review on the wootvision 1440P monitor

@@Asta-s2i That will be up to Wootware :) also love the name. Black Clover !

Heya In the Mi app there should be a WiFi timer

Hey Thanks for the comment. But I have no expertise in those applications to be able to give any advise

Heya So the more walls, floors etc the more interference you will have. Then on 5G not outside. 5G is faster but the signal is weaker than 2.4G so thats normal. Best advice is put the primary node in the most central location you can then mesh thereafter. If you have signal issues then go for backhaul wiring. A basement especially will need a backhaul as you are trying to receive signal through solid concrete.

@@WootDini thank you so much for answering ❤️

It’s R6999 at wootware. No lottery needed :)

I think you can fit 2 in a pizza box

@@WootDini how about 3?

If you cut off the toes