วีดีโอ

75-80 for dual battery e125, 65 for e110 single battery

​Thanks. And with a lower battery percentage?

Alleen matzwart

For the N1S we offer two versions of motherboards with three modes and programming ability with a top speed of 70-75 km/h. The USB programming version is plug and play: escootparts.com/product/n1s-motherboard-75km-h-3-modes-programmable/ Our Bluetooth version requires programming using an app and we will have a programming guide with video. escootparts.com/product/nqi-n1s-motherboard-75kmh-bluetooth-programmable/

Use an external motherboard hardware upgrade is a lot better than a software upgrade because not only does it derestrict the speed but it also increases the performance as a higher capacity motherboard is installed For the N1S we offer two versions of motherboards with three modes and programming ability with a top speed of 70-75 km/h. The USB programming version is plug and play: escootparts.com/product/n1s-motherboard-75km-h-3-modes-programmable/

Yes, we hear about this problem quite often, and you can also use the screen as a replacement

Of course

For the MQI GT / MGT we have a software service, you will have to send us your motherboard to our adress in the Netherlands. After programming we will sent it back to you. The price includes shipping back to the sender. With the software service the scooter is able to go 90+km/h. escootparts.com/product/mgt-90km-h-speed-up-software-service/

For the M+ we offer two versions of motherboards with three modes and programming ability with a top speed of 60-65 km/h. The USB programming version is plug and play: escootparts.com/product/m-motherboard-60km-h-3-modes-programmable/ Our Bluetooth version requires programming using an app and we will have a programming guide with video. escootparts.com/product/mqi-m-motherboard-60kmh-bluetooth-programmable/

Yes

@@escootparts2284 Thanks!

​@@escootparts2284where can I get theese in Spain? Retail price please? Thanks

80+kmh Yes, when dealing with higher levels of ampere this type of plugging is better for heat resistance 60+, can go higher with our 48V batteries but with original that is max

@@escootparts2284 what about the blue dongle? is it required for both for the mobo/controller?

Yes, we even have a extended seat + rear tail box option

Yes, it’s not just a speed lock, but we also increased the performance by increasing the input current (ampere)

escootparts.com/product/uqi-rear-rack/ escootparts.com/product/uqi-uqigt-rear-rack-seat-tailbox/ escootparts.com/product/u-series-double-rear-rack-seat-tailbox/

Message our customer service

The diode inside will balance the differences in the battery percentage level however, it is, of course, best not to have too much of a difference

Yes, the motors in different about the battery voltage it is the motor boards which is programmed at a certain voltage. Therefore, you have to use our motherboards because they are able to change in voltage

If you don’t want to swap the ECU, that is fine, but it’s possible that some features of the newer dashboards will not show on the older ECUs

@@escootparts2284 thanks thats was i afraid of but with urs modified ecu is that possible to work properly?i think the harness and some other parts might different too.another question if i upgrade the hubmotor with stronger one like from ylmotor or qsmotor does ur ecu handle it?and the last one do u build battery packs like lifeop4?

Yes, we have a version for the M models

For the N PRO, NGT and NGTS we have a software service, you will have to send us your motherboard to our adress in the Netherlands. After programming we will sent it back to you. The price includes shipping back to the sender. With the software service the scooter is able to go 90km/h. escootparts.com/product/niu-software-service-ngt-npro/

@@escootparts2284 me have Niu NQI GTS

Yes!

No, you can also, just leave your original motherboard and you will go the same speed however, you will have more range

The instructions are practically in this video 1:20

@@escootparts2284 there are 2 more connectors male and female and what are those

Please make a video about i have that part but have no idea how to install it

120-140KM+-

The motor will only overheat if the ampere is too high, with one battery that is not going to happen.

Send a message on Whatsapp we will help you

I don’t think so. Your best alternative is to buy something like an Apple AirTag, or to buy a separate GPS device.

We have a bluetooth variant 350 euro or a USB variant also 350 euro.

Yes, but keep in mind. The passcode is just another way to start the scooter. It is not mandatory each time you turn on the scooter.

@@escootparts2284 Yes exactly, but a very insecure way of stopping anyone with a reader to just ride off on your bike

escootparts.com/product/mqi-m-motherboard-60kmh-bluetooth-programmable/

Definitely top of the line model for an electric scooter!

@@escootparts2284 I can accelerate faster than my friend on a 300cc motorbike up to about 30mph. Then his engine starts kicking in properly and I'm left behind but it's about the most powerful thing I can ride on my A1 motorcycle license.

You still like it? I am looking for one to comute to work

@@seanpeters3968 yep, get the 3 battery model though, I can get about 50 miles if going very fast but the 2 battery model would drain very fast. It accelerates faster than my brothers 200cc liquid cooled scooter.

EScootParts.com

th-cam.com/video/NaeSgz8WZ8A/w-d-xo.html

You go into apple wallet and add a public transportation card something like a metro card or for the bus. When you swipe the NFC reader it will use that code to verify its the right NFC number

Well I live in China, and you can't select any card as all they will ask is to add money to them, there is no generic card for bus etc. So perhaps it's not going to be so simple.@@escootparts2284

Only a speed up software service for the NGTS. For the N PRO, NGT and NGTS we have a software service, you will have to send us your motherboard to our adress in the Netherlands. After programming we will sent it back to you. The price includes shipping back to the sender. With the software service the scooter is able to go 90km/h. escootparts.com/product/niu-software-service-ngt-npro/

Thank you for the nice comment. Why do you want to loosen up your front brake? Is it because when you are driving the front brake is sticky and keeps braking? If so you can just replace the brake pads since they are probably worn out.

@@escootparts2284 The pads a a bit too close to the disc, so that when the smallest dirt gets on the disc, there is a continuous squeaking while riding (not while braking). Because of that, I use them less, which is not good. So, when I do use them, some of the pads' material gets onto the disc, and the squeaking (while riding, not braking) starts again. From what I've seen on regular bikes, you can make the pads be a bit more apart, further from the disc. They would still work correctly, but the chance of squeaking is less. I have seen how to do it on cars, motorcycles and bikes, but not on the UQi+. You'd have to loosen one of the screws, then hold the brake to its maximum (on the handlebar), retighten the screw, and release the brake. But I don't know which screw to work with...

Its worth a try to replace your brake pads, overtime there is dirt in your brake pads and most likely your brake pads are also slowing down your scooter when it's driving. escootparts.com/product/niu-scooter-brake-pads/ I don’t believe the UQI+ brakes are able to adjust its tightness around the braking disc

We do have parts for the NGT if you want them. The original 60V batteries from NIU can handle 45A maximum each so it could run at 90A, the scooter displayed had an ampere of 70.

@@escootparts2284 gts not the normal ngt or how niu call them.they use the same hardware?all i want to replace this dash for the new one.

​@@dokesz530see this link escootparts.com/product/screen-upgradeset/

Message our customer service, we can get you some. Please contact us on WhatsApp by clicking this link or adding our number and sending a message. This way it is more convenient to talk. wa.me/message/N7KKTJ6XYVEJP1 +31616827332

For the N1S we offer a motherboard with three modes and programming ability, the motherboard will have a top speed of 70-75 km/h. escootparts.com/product/n1s-motherboard-75km-h-3-modes-programmable/

You can, you just have to pull the wire from underneath the seat to the front.

Same voltage is fine