วีดีโอ

There was no meat ruined with this shot placement and this cartridge. 300 blackout is subsonic and does very little meat damage.

Yes absolutely, this does very little damage to the meat.

For food.

The ac maxed out one generator some of the time. About 50/50 it would start but then it would over load. Both of them together never had an issue. Both together can surge over 110 amps for a bit on start up so that’s a ton of power for such a small footprint.

@ ah okay I didn’t realize that you also did the ac aside from the compressor. I’m trying to run a McGraw 1.8 hp compressor, while also running a 12 amp vac/15 amp steamer at the same time. The compressor pulls a good 60+ amps on start up and I know the other two will pull about 20 ish on start up.

Look for these and the genmax 7250 on sale and get two. Then you know you are covered. When you can get these on sale, and it really is either one, you get the best wattage/amperage per dollar you can buy with the option to scale down to one generator for better fuel consumption.

@ I’m going to use the generator for my mobile detailing van. So I don’t think I’ll be able to fit two of them! I’ll have to do some measurements. But I can get these second hand brand new for about $625-$750. Not a bad deal! Just need it to handle about 60-70amp surge from my compressor starting up lol

Should be close. Also look into a starting aid like a hard start or soft start. It may be possible.

And by proper you mean what?

Easy to harm and not kill with any shot you take with any weapon. Missing sometimes is apart of hunt/shooting. Just look at any hunting forum. Lots of deer lost every year. Me I’m 10 for 10 with shots placed in the nervous system.

@ I know about shot placement due to me being a hunter myself but the head shot is always a lot easier to miss or injure the animal due to if it moves. Shooting behind the front leg for a lung shot or heart shot is a lot easier and preferred due too the animal won’t have time to move or duck a “ broadside “ shot. Either way everyone shoots how they want and I’m not knocking either way someone goes about it. I’ve takes two headshots on white tails in my life and got both. I just don’t try to take them shots if I don’t have too.

@ deer can dodge a broadside if you shoot a bow. My point being is that nothing is ever guaranteed. Your point I believe unless I’m way off is that mitigation of risk is worth the reward. Wounding the animal is bad. I agree completely. Unfortunately where we disagree is that a broadside shot is wounding the animal until death which can take anywhere from minutes to hours or never. If I hit my target, it’s lights out instantly. That to me is most ethical. To each there own though. I can appreciate your point of view though it is one we do not completely share.

Correct!!!

I like a challenge lol

Nothing does!

Yeah I like it!

That is a screaming deal! I got these when the genmax was $1700 or so. Gotta love the price fluctuation.

@@TheDailyAmerican It's mainly that WalMart is the 800-lb retail gorilla so they basically went to Genmax and said, "we'll order XX amount of this generator BUT, we want our own exclusive model that no one else can price shop". (I was a manufacturers rep years ago and had a few SKU's with them). This one is spec for spec the exact same thing as their GM7250 that retails for similar to the Pulsar and, from what I've read, they buy/build at the same place. (Identical engines, etc) Either are great gens and good clean power

@@TheDailyAmerican it sure is informative! Great job!

Comment above

Yeah there is always that hahaha

That’s great!!! I hope it serves you as well as it does me! My next video on these will be more explanatory.

That sounds incorrect. During parallel operation, the voltage is the same but the amperage is doubled. Since one generator can produce 25amps per leg, 2 will be more. Hope this helps.

@@TheDailyAmerican I have two inverter generators and have an amp clamps on them both I’ve ran 18 A on just one by itself then when I parallel it and put the amp clamps on each side of the parallel kit, I was pulling 9 A out of each generator I don’t think amp clamp lie, but the main thing is that they stay the same frequency or it can cause damage to your equipment I know you have the 240 V. I am not for sure if they’re different. All I have is 120 v inverter generators 3500 W peak a piece and 3000 continuous my voltage and frequency always stays the same. It’s just when they’re paralleled. I can get up to 50 A at 120 V instead of 25 A on a single unit and we used my cousins fluke amp meter for the testing

@@paultice610I think what you’re saying is that on a fixed load the paralleled units will load share. That is correct. The potential is doubled but actually is halved when a load under max is applied. Say a 20amp load is connected. One generator will apply all 20 but when the generator is paralleled, the load is now split equally between the two. So 10amps each. Is that what you’re asking?

@ thank you that’s the word I was trying to think of earlier. I just wouldn’t for sure if it was the same for the 240 V inverters as well. Because I’ve been watching a bunch of videos because I would like to upgrade so that I can have 120 and 240.

@ your very welcome. I can understand. I like having the most options that I can have within reason. Keep an eye out for these to go on sale. I got them for $949 each.

Excellent point yes this should only be done if at least one generator has a sync board.

Yea thank you for the question. It wasn’t listed but when the generator was heavily loaded, it was powering either the central ac or water heater.

Yea thank you for the question. It wasn’t listed but when the generator was heavily loaded, it was powering either the central ac or water heater. Also they do sync perfectly

No sir not typically. Only if the manufacturer says so but normally they do not.

Hilarious

Surprisingly enough, yes!!

It’s worth the try at least. Good luck!!

Well an rpr but it’s the same deal with that short of a barrel to test. Made a difference though.

You and me both

I apologize I have just now seen this. Let me know if I can still be of assistance

Long tubes into borla turbo mufflers I believe. I agree it sounded awesome!!