วีดีโอ

Stop recording and get that other blower 😂

Dual f16s

Creativity and enovation 😂 🎉

The blow pack 2000 that blow leaves (and something else) in the back

Eww

A RAT WALL??? whats that??

❤🎉🎉🎉

What an awesome machine!

Mmmmhmmm I reckon he's gona need a ambulance

Clean 🧼 as a bar of soap 🧼

Using the clutch like it’s a on off button. Who tf taught you to drive like that?

An important missed trend is that fertility rates in African cities are radically falling, not just declining. In just one generation most will barely stabilize at 2.1

I have had the SAME issue on my 2016 Toro 30 in TimeMaster. It NEVER starts hot. There was a recall to change the crummy paper fuel filter, but i solved that design flaw, where the fuel feed is only 1/2 in drop from the tank outlet to Briggs 120000 series engine carb. I lashed on my Honda GCV190 Tank and a nice long hose, with a Disc filter and Shutoff valve from Home Depot. The Briggs recall is to install a metal HEAT SHIELD between the cyl head and float bowl, to fix hot restarting. I often do better than that, just get some silver foil faced R-MAX foam insulation, maybe cut 3x5in,, smash a recess to fit behind the float bowl with a small hammer, and shove it in place above the black plastic belt guard cover. surfaces, that worked for a few years,then needed to cool things down with Starting fluid or Gumout to restart hot. I then replaced the carbs several times with the inexpensive ones on Amazon. Worked a little better than Briggs OEM. FINALLY, I did replace the Magneto coil and shutoff switch, but yesterday PROVED THE NEW ONE IS INTERMITTENT. Got an adjustable Spark Tester, set for 10KV gap or larger - NO OUTPUT!!!!!!!!!!! Then I took the old one, sanded the pole pieces and TAPED the entire HV lead with 3M Electrical tape, and split the plastic insulator sleeve from my new Spark Tester, covering the CHAFED section where the muffler heatshield abradedi it. BINGO, it finally started! I then checked the Compression cold, but forgot to open the throttle plate - it read almost 30lbs. We also replaced the crummy HEAD GASKET again, with the 2nd gasket in the $42 Amazon kit, which HAS A NICE METAL fire ring, but is for the 223CC Upgraded engine all the Yard Service guys pay $500 new, to finally fix the underpowered temperamental 190. I found the old gasket BLEW OUT near the Exhaust side, a second time, vapor from all my Starting Fluid was coming out. Another telltale sign was the 4 head bolts were NOT TIGHT. I should have retourqued to the 125 in-lbs spec AGAIN after a month. Since 70lbs seems to be the spec for these 190CC motors, I WILL be buying a new Piston, Rings, and Wrist pin set, and the 2 different length Rod bolts to raise the crummy 30lbs that is causing stalling issues. And my friend set the VALVE clearances ay 0.006in, AFTER INSTALLING THE NEW thicker gasket. It starts if I put the choke rod in, but soon I fave to remove it, and flip the choke spring 180 degrees over, to the main governor spring post, r it will bog down too rich! When I get anther $500 saved up, I am going to Toro Menders in ATL to buy a replacement 223CC engine, and a new DECK for another $100. Final note, there is a Hi Lift Blade kit, including a new front V shaped shield that bolts in with the front wheels assy - critically IMPORTANT, IT USED TO just fill the chute with grass. ------------- for the past 8 years it will FILL the bag with even wet grass- My thoughts, nothing else is safe on my sloped back yard, and at 150lbs for me, I can easily handle this 135lb mower. Just skip the $200 more Electric Start option, because it will be clunkier to use there. Just my thoughts after 8 years of Time Master troubles. And I replaced many broken cables, worn bearings, and belts Fyi, Hilary in GA

What did this end up being?

Hell yeah

20 bucks ? Not good too much !! 😂😂😂

?

I don't get it.. it's a 2 sq ft slab.. ??

Thanks for the video ✌️ 👍Happy Labor Day!Did your truck crack the concrete?

When you don't think ahead and plan them all together because it can only be on 1 day planned.

WTF is he doing? You're supposed to rinse the friggin broom off between strokes. Sad.

Grest looking job

Where’s the joints?

Wait till the first frost and ur on ur arse😮

Was the cement drying to quickly? My neighbors put salt on there driveways in winter , i dont do that, i would rather keep up shoveling the snow. Ate up there driveways, now they are crumbling .

Love the look but downfall you can't really shovel the snow off & salt cracks your concrete

Nice

I just bought this mower new last month and so far I am NOT happy. I paid $1500 for it, it takes many pulls to start it, it clumps in heavy grass when mulching and has even run out of gas on me on my small yard (8,200 sq. ft.). I'm on TH-cam looking for answers!

El torero José Tomás es muy guarro para su trabajo

I use mine commercially and for side discharge only so i get the grinder out and cut the side discharge to twice the size. Always wear safety glasses when using the mower after doing this as some debris will fly backwards and get ya.

А зачем, новые ножи изначально идут тупые и никогда не точаться, у них другой принцип работы, скорость вращения😂.

Looks more like 2 yds! Don't get ripped off!!

I've done this using a dingo style skid. Less mess. But well worth the time saved and your workers backs saved.

Bro is barely even moving

Nice angle,if you know you're property.

Drive forward a bit while it's digging. That hole is dug at a slight angle. Makes it hard to level out post in a slanted hole.

Thats a lot of concrete with no joints. Every penetration and outside corner will crack. Also trying to figure out why the concrete is 4” below the chalk line

Shit up and take my money

Nice.

Well, it's better than mine. I use Dewalt drill with a fine stone in it. Yours is faster.

Nice machine I need one . That will save a lot of time

Pretty sick

Is that a echo 9010?

Working in South Texas years ago, I went into an area that was under Quarantine for ticks. When I came back out , hours later, they used a high pressure water hose to wash off my truck. Especially underneath.

What is that

Hate those quarries right after washing your truck they pour that dirty water all over it

Those are usually just for the big trucks, the dump trucks because our tires are so big and we have so many that we track mud from a job site onto the public roads and they don't like that

Save it for boat races

Just buy a bagging mower

What friction device?