วีดีโอ

I believe so, if my memory is correct

@@filigenzilab9613 thanks Sir!

@@alexcosta8062 no problem

all the ones I am dealing with require heat, fyi. There might be certain grades that require no heat.

@@danielstaab1267 ok thanks

Thank you for your question! The general ratio for mixing sand and cement mortar with a water reducer typically falls within these ranges: Sand: 4-6 parts Cement: 1 part Water reducer: 0.5-1% of the cement weight Please note that these ratios can vary depending on specific applications and environmental conditions. For optimal results, a thorough evaluation by our professionals is recommended. For personalized formula/additives support and to achieve the best results, please visit our website: wotaichem.com/cement-additives/

The recommended dosage of the top four additives in our self-leveling applications vary based on your specific application and product grade. For personalized solution, please visit our website www.wotaichem.com for our industry experts who can provide tailored formulation advice!

tried it, pva doesnt have the elasticity or strength to stretch into strands like that -p. parker

@@throwaway9129 thanks, tested it too

No, they cannot be mixed. Chloride ions can cause corrosion and efflorescence. In wall putty formulas, calcium carbonate and calcium hydroxide can be added. Sulphonated naphthalene formaldehyde is a superplasticizer used in concrete. For better results in your construction project, precise products should be incorporated. Feel free to visit our website at wotaichem.com to explore high-quality construction additives. Our experts will provide customized formulas and technical guidance for your project.

Hi! The solubility of calcium formate depends on various factors such as temperature, pressure, and pH levels. Generally, as the temperature increases, the solubility of calcium formate also increases. At room temperature (20°C) and with a neutral pH of 7, approximately 152 grams of water can dissolve 100 grams of calcium formate. However, if the water temperature rises to 60°C, about 100 grams of water can dissolve 100 grams of calcium formate. If you're interested in exploring more about calcium formate and related products, as well as tailored construction solutions, our team of industry experts is here to assist you. Feel free to visit our website at wotaichem.com for more information and customized services. We look forward to helping you with your needs!

The specific addition quantities of calcium formate and cellulose ether in wall putty cement depend on factors such as the formulation requirements, desired properties, and the overall composition of the mix. As a starting point, here's the general dosage for both additives: > Calcium Formate: Typically used in the range of 0.1% to 1% by weight of cementitious material. > Cellulose Ether: Typically used in the range of 0.1% to 0.5% by weight of cementitious material. It is recommended to start with a small percentage of each additive and conduct trials to achieve the desired results. For precise guidance or tailored additives to your project, please consult with our experts at info@wotaichem.com or visit www.wotaichem.com. Our team is committed to providing customized formulation guidance based on your specific needs.

To prepare the HPMC solution, you can use a 1% or 2% water-to-HPMC ratio, depending on the viscosity desired. It's essential to determine the appropriate ratio using a viscometer. If you have more questions about the application of HPMC products, feel free to visit our HPMC page 👉 wotaichem.com/hpmc/ for more information.

For specific usage guidelines, the required amount of (mL) aquadest varies depending on your application. We recommend visiting our website wotaichem.com/ for more HPMC related information. You can also stay updated with more info by following our @WOTAI CHEMICAL social media accounts on Twitter and Facebook. We'll update you with more highlights