- 52
- 232 494
armadillo outdoor adventures
เข้าร่วมเมื่อ 10 ธ.ค. 2014
This channel is for those men women and children who love hunting and fishing or just enjoying Gods gift of the outdoors.We offer tips,tricks,tactics and gear reviews as we try to entertain you with the footage of our adventures.I have been a duck, deer, and general enthusiast to shooting sports as well as a fisherman of any fish in the Texas waters , and many other waters to. Over the years I picked up a few tricks that I will share , and hope you can gain something and help you have some memorable adventures to.I try to post something new on Thursday nights for Friday mornings although I do very occasionally miss the schedule.I am grateful to everyone that watches,likes ,comments, and subscribes, so keep watching,and don't forget to hit the subscribe button. I'll see you on the water.
Bridge crappie fishing late Febuary
Lake fork crappie fishing bridge pileings late Febuary. Spawn is close. Jigs and Mostly minnows. #crappie #lakefork
มุมมอง: 248
วีดีโอ
January Crappie on Bridges Lake Fork
มุมมอง 1Kปีที่แล้ว
I explain how I learn more about crappie fishing. I go into how I put a mess of nice crappie in the boat fishing bridge pileings on Lake Fork. #lakefork #crappie
January Lake Fork Crappie
มุมมอง 6492 ปีที่แล้ว
Catching deep water crappie on Lake Fork using Livescope. Learning how to use Livescope and learning how to catch crappie in open water. Yall check it out as I share what I am learning.
Mud Buddy with Predator 670 Exhaust Mod
มุมมอง 2.6K2 ปีที่แล้ว
I show how I Modified the Exhaust on my Mud Buddy Surface Drive powered by a Predator 670. #cutandweld #predator670 #mudbuddy
Predator 670 Mud buddy Fuel pump replacement
มุมมอง 3.2K2 ปีที่แล้ว
Take the factory pulse pump out of the Predator 670 and install an aftermarket pump on the Mud buddy surface drive
Predator Mud Buddy Carb Tuning
มุมมอง 6K2 ปีที่แล้ว
Mud buddy surface drive with a 670 predator. Adjusting the stock carburetor
November Heats up
มุมมอง 822 ปีที่แล้ว
November the 8th on Lake Fork Texas. Catching nice catfish still pretty shallow. #catfish #lakefork
Halloween Monsters on Lake Fork
มุมมอง 962 ปีที่แล้ว
Halloween morning catching channel catfish on lake fork Texas. #catfish #lakefork
Starting to get chilly
มุมมอง 732 ปีที่แล้ว
Air is starting to get chilly on Lake fork and the bite is heating up. Had a great day catching channel catfish and blue catfish on Lake Fork in Texas. #fallcatfish #lakefork #catfish
Catfish Work Out
มุมมอง 832 ปีที่แล้ว
Fall Transition has started. Catching Channel Catfish on Lake Fork double, triple and even 4 at a time. #lake fork #catfish
A Fire On Lake Fork
มุมมอง 722 ปีที่แล้ว
A Great day of catfishing on lake fork. The channel catfish bite was on fire. First fish on one of my new rods designed for channel cats.
Sun is up Baits are down, First Catfish in the new boat on Lake Fork
มุมมอง 392 ปีที่แล้ว
Sun is up Baits are down, First Catfish in the new boat on Lake Fork
Lake Tawakoni Blues and Channel Catfish
มุมมอง 1542 ปีที่แล้ว
Lake Tawakoni Blues and Channel Catfish
July 25 Catching Shad and Channel Cats on Lake Fork
มุมมอง 782 ปีที่แล้ว
July 25 Catching Shad and Channel Cats on Lake Fork
Turn old mallard hen decoys into wigeons
มุมมอง 11K8 ปีที่แล้ว
Turn old mallard hen decoys into wigeons
How to repaint a Green Wing Teal hen decoy
มุมมอง 3K8 ปีที่แล้ว
How to repaint a Green Wing Teal hen decoy
How to repaint a blue winged teal decoy
มุมมอง 3.1K8 ปีที่แล้ว
How to repaint a blue winged teal decoy
Do you remember about how many turns out from all the way in you did your adjustment screws
It's been a while I can't remember
Dang music is too loud...............
This was one of my early videos, I was still learning
Outstanding job
Thank you for watching
My late uncle was a veteran ❤
Mallards to black ducks also. Old teal decoys to coots. Only find coots in good feed areas
Where you get that throttle setup?
It came with te setup I wish I had more information
Your good American sir. TY MEGA
I appreciate you bud
Thanks for the paper plate trick!
I have front bait and tear live wells that are not working. I’d guess both need to be done the same way. Would it work if I just do it to the discharge line only?
Poor features on all mako boats! I have the 18 lts with the same problem but my live well will not drain and just overflows into the boat mako has known of these problems for years but will not fix them. I will never buy another mako boat again!!
Cut the Fen music
Me and a buddy tried the crappie in 30 ft of water yesterday around 2946 bridge area. No success at all. We don't have livescope. Any suggestions of an area we need to be fishing for crappie?
Try the 515 E Fish off the east side of the bridge about 20 ft
@@armadillooutdooradventures9792 thanks for the info armadillo
Thanks for the info armadillo. Will try it this weekend.
im a veteran and first responder both fire and ems thanks for your videos there were a lot of help
I'm glad to hear it was helpful. Thank you for watching
Great job!
Thanks for watching I will be putting out more content soon.
great idea... good information. hard to hear you with the background music.
Yea that was a while ago, I've learned a lot about editing since. Thank you for watching.
Music is to much. Hard of hearing and not enough volume.
Yea I've learned alot since this video. Much better quality now. Thank you for watching
I have the same problem with both my live wells on my Carolina Skiff. Basically the same setup and I know its a air lock that's causing my issue. Tried rerouting the hoses so that there were no dips or low spots, but that still didn't help much. Now I'm going to try this vent setup as you did and see if that works. Mine goes to a "T" that splits off to the back and forward live bait wells, and if I break the connections at the "T" (pull the hose off) that pump works just fine. I can see the water in the hose that's causing the air lock so the vent should work just like pulling the hose off the "T". Thanks for the idea, it looks like a simple enough fix.
Hope it works out. Thanks for watching
What did you do with the crankcase tube that ran the OEM pump? Did you just leave it venting to atmosphere? I’ve got a built 670 with a 34mm Mikuni flatslide. I’m running an electric fuel pump along with the OEM pulse pump. I’d like to just run directly from the electric pump to the carb, but I’m not sure what to do with the crankcase tube. Any advice?
I want to say I left it open its been a little while
Did you ever figure out what to do with the crank case hose?
@@jadenraleigh1863 It needs to be plugged or you will pull dirt into the engine
this is a common problem with these engines, the stumble. Back both jets in carb out 1 turn
Thanks for watching. I was showing the process I used, there are alot of variables in tuning a carb. The number of turnes could be different depending on altitude barimetric pressure dewpoint in the air etc. I think you just tune until you are happy with the performance. thanks again for watching
Music sucks
I dont know what he had for exhaust. I heard one of these going through the lake sounding like a harley
Yes its a Vtwin with an open exhaust itsgot a beefy sound
What app is that you were using for the mph?
It was just an app I found on Play store I don't remember the name and its in an old phone. I know it was a free app wish I had more info for you
Is there a link for the fuel pump you got from o riellys
I dont have a link to the pump but it was a basic low pressure pump. I just didnt want to go with the same one I puled off.
Thank you sir! How do you like the pro skiff? I’ve been on the fence about getting one.
It has pros and cons just like any other boat. I will say it is very stable in rough water
What is the advantage of doing this?
The factory exhaust is pretty restrictive and we were getting ready to put other mods into the motor
Did you build that surface drive?
No it was a mud nuddy
To much noise to start so I didn't look I got my one music
Interesting
Seems to work pretty good for me. If you try it let me know how it works
How did you make the mud buddy work with the predator? Picking up a mud buddy frame and can’t find any info on it
It was together when I get the motor
I’m so glad to come across your video! I’m in the process of putting a predator on a mud buddy frame. Did you use a 1” to 1 1/8” adapter sleeve?? Did you have to make any other adjustments or modifications to make it work?
I think it has the 1 1/8 shaft
@@armadillooutdooradventures9792 They are 1” unfortunately, and the belt pulley/clutch is 1 1/8”. I’ve read about some people shearing adapter sleeves but yours seems to run well. I’m not sure what I’m going to do.
@@CC-pi6gm I ran it trough all sorts of crap wfo it never gave me any trouble. I sold the motor recently and got an outboard. Will probably be getting a jet foot motor soon. That motor served me well but my needs have changed.
I’m going to buy one of them predator 670cc V twins I was looking at one at Harbour freight and on it it said do not run vertically. Why do they say that
Its in horizontal position here if you turn it up on its side fluids will run out
Duck Commander song
Didnt realize it I just pulled it straight out of the TH-cam audio library
It worked 😊
Thanks for watching
Please don’t play back ground music because we can’t hear you
Sorry for that. It was one of my first videos and I was new to editing. If you see some of my newer ones You will see I have gotten a considerable amount better, Although still could always use improvement. Thank You for watching
They gone say u making liqour
Thats the barrels we hide. Just kidding it would be more like beer.
Great info. I've been doing old mallard and pintail hens. I believe if you have detailed hens it can't hurt.
I believe the more detail the better. Thank you for watching.
Did you film this before or after the freeze?
Right before the freeze
Interesting, dbl jig rig but with a weight on bottom. Not sure I've seen that before.
Had some oldtimers suggest it. Similar to a drop shot. Been working pretty good
@@armadillooutdooradventures9792 Nice I give it a shot I figured that drop shot weight would spook them but I do like that nice big clear target on livescope
Side note: to remove a hook that is swallowed deep, needlenose pliers through the gill plate and twist will get that hook out 99% of the time 😉 Tightlines brother! 🤘😎
I think I will get some forceps, but the through the gill is a good idea
Make sure the info is correct, there are only a few Texas lakes that enforce the rule of retaining ALL crappie caught and not ALL. Also, to help in the future and save a heartache, lose the Crappie sleeve. Local game wardens use a Check-It-Stik to measure length as the sleeves on alot of occasions are off as much as a 1/4 inch. And depending on their mood that day, whether you get a ticket or not. Ask me how I know from a few years back 🤣 Luckily I got a warning, with a 9 3/4" fish that measured 10" with the sleeve. Good video and tightlines! 🤘😎
I spoke directly to Kurt Kelly who is my warden about this. I usually wont keep one that measures less than 11. Thank you for watching and I suggest anyone get to know their warden and ask questions regularly.
they will kill ducks for sure
Do you have a part number for the fuel pump
I don't have the part number but it was the only low pressure precision pump Oreilly had. It was either that one or the Edlbrock I would suggest planning on replacing either one at least once a year especially if you run it much at all. Thanks for watching.
What size boat and what kinda speeds are you seeing
It's a 1648 i'm getting 23 to 24 empty
Sweet I got mine on a 1444 monark 670 with an old Dixie surface drive frame still trying to find that sweet spot in my trim but hopefully I start seeing some speed soon I’ve only hit 16 so far I know it’s got more than that
This is what I done to mine. Replaced the carb with a true mikuni slide carb 38mm. Installed an electric pump just as you did, only I installed an adjustable fuel regulator so it doesn't flood the carb with excess pressure. I also used a relay to power pump instead of powering pump directly through key switch. This will help key switch last allot longer plus prevent smoking wires (fire hazard). This is how big industrial motors are ran. Use small power to control big power. In the case of boats it is dc power which is harder to switch than ac power. Enjoyed your video. Always something to learn. Thanks.
Thanks for watching, The relay is a great idea I believe I'll try it. I have a 38 Mikuni will be installing soon. Going to try to put out the exhaust video this weekend. Keep your eyes open for it.
What fuel pump and fuel regulator did you use?
@@camerongliganic7333 the pump is a Precision low pressure from Oreilly no regulator.
As to the pump and regulator, I used an old Holley canister or in line pump I had from an old hot rod I had years ago. Not a racing one, just one that would feed a quadrajet. I had an old napa brand reg from back in the day with a pressure port for a pressure gauge. It is regulated to around 2 psi. Your set up may have different requirements depending on carb, cam, heads, etc. My engine is NOT stock by any means. It operates from 5 to 6000 rpm but it's still only two cylinders and too much pressure overcomes the float seat and will flood the carb. I'm sure you can find these two items at any AutoZone, advance, O'Reilly's, etc. You will probably have to experiment with your engines pressure requirements at idle and WOT to see how much it needs to keep engine from starving from fuel. Here's a freebie. Mount the fuel pump as close to your fuel tank as possible, as some pumps don't like to much suction head. Obviously take all precautions to make it intrinsically safe. (No sparks.) I would give you guys some part numbers but they're are all wore off. 🤷 Good luck and most of all have some fun.
Can you list everything you did from bone stock?
At the point here all I have done is adjust the carb. Since then I have installed a new fuel pump,that video will be out soon. I have gutted the exhaust and opened it up. I built a pretty cool grab bar and I have a mikuni carb to put on. I have a few videos made just not edited yet and will be making more as I progress. Thanks for checking it out.
Do you have a link for that book
I got the book from a taxidermy supply company vandykes or wasco should have it
First time seeing you I’m going to join please your music is too loud don’t be playing music when you’re talking. I love your details about how to tell us to do things thank you
Thank you for watching and following. Those are early videos I was still very new to editing. It has gotten better I'm still learning tho.
@@armadillooutdooradventures9792 I have several decoys that I bought that I am wanting to paint now canvas thank you
@@garrywaterman7570 Sure hope I have made it easier for you. I've had hundreds of decoys given to me over the years and I had to figure out what to do with them so I just made them fit my needs
Music is WAYYY to loud AND you don't need it. Good info. Thanks!
Thanks for watching
Exelente ❤️🔥😇✌️
Thanks for watching
Great video for helping others out
Glad to help