วีดีโอ

I got one of these recently. It came with a tape loop on a carabiner inside, which obviously you can hang outside. I wish the inner walls had pockets. And i wish they had another clear pocket rather than the useless card holder.

Hi -- happy new year -- just watched your video + subscribed -- yes what a job repairing the 22mm pipe eh -- think we've all had jobs like that ! -- at least the house was empty + no customer standing in the way watching you -- it's easy to say it now coz yes i would have tried soldering the joints -- but our friend speedfit push fittings would have done the job + they would have been hidden ! -- pig about the fill valve too eh -- was not your fault + if you don't charge for renewing it -- wait until you do other jobs for this customer + add it on to any price you give ! -- best way at least you don't lose o ut ..-- take care Jim

it's always the best when you have an empty house to work in. No nosey customers. If only it was always like that

Happy New Year 😊 Don't you find as soon as you have a clear out you need something 😂

Yea I get what your saying about the fill valve I would probably be the same as you ,as it’s an easy swap I would not change but if that was a different one you mite if had to remove the cistern so then I would of charged

HAPPY NEW YEAR!🎉 I hope 2025 is a great year for everyone watching! Health & Happiness🙏

Thank you to everyone that has watched the video, liked and subscribed!

Really good video mate thanks, so basically the primary flow and return from back boiler you have ran tgem into the combi flow and return? Am i right in thinking this?

What tool bag is that? Cracking vid. We all have that one job that causes the headache, usually on a friday at half 4😂

You tried the ridgid 15/22mm combination pipe slice? Would fit nicely in the front pouch

Have one myself that I've never loaded out. Given me some serious tips on that it xan carry...ps the million dollar question is what are you gonna replace it with ???

Thank you to everyone that has watched the video, liked and subscribed!

I love seeing a rad being dragged around on brick paving😩

gr8 job, i couldn't see the vent pipe, did you sort it, or it's been sorted out already by someone else?

Nicely explained mate, great job.

1000th subscriber goes to me 😂. It was 999 when i clicked, clicked off and i was 1000. Wicked channel thank you

TOP TOP JOB U ARE CLASS MATE

Nice video pal, very neat 👍🏻

Nice and tidy pipe work. keep up the good work👌

Thank you to everyone that has watched the video, liked and subscribed!

Beautiful work 👏 u are by far the best plumber on your so precise and skilled with your touch I'm curious as to know your back story what age are u are u long in bussiness and how and why u became a plumber mate bcos u definmsde the right choice 😉. I'm an apprentice and love this trade I'm 33 and made a career change from ground works.

Really excellent work very neat and professional I like watching skilled craft men like yourself you are far and few between. Weldone sir. 👏 👏

Looks like sediment in mains. Possible repair work out on road done. So its clogged up filter on shower and not working, hence why it needs flushed through

Boys what are yous on about, thats an electric shower, which is run off the mains so its not coil related.

Is it connected to the storage tank outlet in the loft ?

Tidy job👍🏼 my fav boiler! Ive fitted a few combi paired with unvented cylinder jobs on large properties and it works well. Maybe the last plumber had the idea that that system with the cylinder left in would be beneficial to them🤷🏼‍♂️

Ideal boilers are absolute rubbish. Good video though

That old system is dog shite, don't fit 24's it's fine until a cold winter, there is no money in it to go to a 30. Good days work

Thank you to everyone that has watched the video, liked and subscribed!

8.5.23 UTUBE. NSTALLING A DIRECT VENTED HOT WATER CYLINDER. What a dump those flats are. Who threw all the rubbish into that cupboard. if the people living there knew about the billions of pounds squandered by this Govt. Police. Health. Charities. Religions. Law. HM Courts.. Political Orgs.Royals. Media then did something about it rather than sit there watching 'crime' movies they would not be living in that place. Heres what we have been told by EEC Parl- 'Nothing Can Be done About Crrptn 15000 Deaths Cover Up. Police Violence Being Used on You Or The 400 Suicides A Year' etc etc

Thats mixed with heating. Have to replace the cylinder

Coils gone ?

Love the sense of humour and reference to the plumbing gods 🙂 Subbed

That was not your mistake . It is cheap manufactured faucet

It was smart of you to reduce your anxiety and take a break and not let it get to you. If I were doing the job replacing the faucet, as you call it a tap, on the kitchen sink I would have used a scraper to remove that crust and then some lime away or solvent to clean it up or even some 600 grit sandpaper. The way you left the crud under the faucet the customer will not be able to get to it to clean it.

Low budget taps made out of shite

The perils of Vicky Plumbing cheap rubish.

73 year old plumber here and been plumbing since I was 16. I would have put a bit of heat on that nut. Just a bit mind. 👍

What country is this?

Hey, just wanted to say that as an apprentice, I really appreciate the way you explain what you're doing and why you're doing it, it's so helpful - and on top of that you film everything you can. I've learnt so much from watching your videos. Keep it up!

How's things man, just found your channel and having a binge. What do you use to record your videos? Cheers

why do some customers watch? i just tiled a kitchen splashback and for two solid days the customer watched me tile

As soon as the tap broke I would call my wife to say, “ I am running late today”. 😅

A plumber should keep a number of spares in the van at all time - several set of flexi-hoses with isolators should be on that list. I mean they cost £5 each so next time splash out £50 and start being more professional. You looks like a bad DIYer when you have to constantly be popping to the shop to buy a pipe or a connector. As for this tap repair - I hate bathroom taps - they are never ever simple and quick and I feel for you and this could happen to anyone. You should have changed that overflow pipe after you saw the clink.

All the parts seem to be so flimsy these days with no real strength to them. Back in the day parts were quality, strong & robust & lasted decades, not so these days. I’m a sixty one year old lady & way back when I left school I longed to be a plumber but in those days no one was willing to give an apprenticeship to a young lady, thank goodness times have changed in those respects. I also wanted to play football & rugby but it was the same unfortunate story there too, only netball & hockey for the girls then. I enjoy your videos & find them relaxing & informative despite the odd mishap from time to time which happen to the best of us 😎👍⭐️⭐️⭐️⭐️⭐️

Is not 22m to a bath

Just think, you went from bad to worse to worser and it only took you less than 5 minutes. I certainly hole you learn left from right handed threads. I realize you are in a different country but even there they make right handed threads.

Why didn’t you undo one nut then spin the hole tap

'PromoSM' 💋

Feel your pain mate, and every one thinks our jobs are so easy ,