วีดีโอ

Shit guys! Thank you! I wasted 4 hours and this got it out in 5 minutes!

Wherever are you located?

I have toyoya auris semi automatic 2007. Slips to neutral.if off the engine and wait for a while it will engage and the gear fault signal will disappear on the dashboard. I took it for a scan and i got p0810 .it was erased and the gear has not slip to neutral again but when it changes gear,u can feel it. Am really not comfortable because i don't know what damage is happening. Could it be the actuator?

Thanks so so much. done!

Hello Mate , hope you are well , I have a Toyota Yaris 2007 Mmt automatic and it shakes when I stop and at reverse, but mostly in traffic shakes and you feel it from the seats , I have change the clutch, before this problem wasn’t , what it could be please ?

Sometimes mine moves to N . If i off and on the engine it will engage.. it does not happen more often. I did a diagnosis and i saw P0810(clutch adjustment). How much will it cost me to fix this?

Worked Note 2008

It worked!! Thank you

How to od it in glc 2018

How many hours work boss? I put new ventilator and new modul and still not working 😢😢😢

I have this problem currently trying to source suitable parts, Before I go to deeper research for parts are you able to supply me reverse selector Arm and brushes ?

Didnt work for my micra 2006

I have Skoda octiva vrs 2009 DSG once the car has warmed up after around 30-60mims of driving it when am coming to a stop and changing from 2nd to 1st it judders and sometimes evens stalls . I have changed the throttle body and had electrics done but still doing it. Just wondering if you have any advice please

My car no have i botton and is 2008

Just bought a 2008 Honda Civic iShift; there are no problems with the car at the moment, but I wanted to know if you serviced these or could check the state of the actuators. I am taking out breakdown cover but I would rather get the gearbox checked out. I know you are in Harrow, I am in Watford so not too far away.

How much do u charge for dq200 service including mechatronics oil?

I have a car with P0717 error code. I need your help

I'm happy that why he fixed my car they are highly recommended many thanks

Merhaba arabam c 280 2006 model ..radyo teyp ekran açmıyor..ne yapmaliyim lütfen 2 gun sinra 3400 km yol yapacağım ve muzik yok😢

It’s kash here carmax very good garage

Very good WELLDONE

Actually this is NOT TCM , this is just conductor plate

How much would you charge for a job like this.

What's your post code? Your phone number doesn't go through

2007 e350 i got P0715 input turbin speed sensor “A” circuit. Please help how to fix the problem?

Why Toyota Corolla auto Manuel gearbox not enter gear?

Where do u based and what's ur contact

I just got a code that says clutch position sensor today

Works 100% .. Thnxx

Good morning, what is the size of this spare tire?

Thanks you & today 2024

so this is for a standard transmssion only right...? mine is auto trans and getting same P0805 code....what can I do to fix...? 2012 ford fiesta

Hi I have a question. We repaired a faulty gearbox controlunit. The same unit was put back into the car. Now theres a faultcode wth the number 0610. Y3/9N1 Do you know what that mean? Mercedes benz B170 2009 petrol

Thank you for the info! Would it be better to buy a full Auto civic?

Just did it on my 2015 Audi a5. Absolutely worked. Car would react immediately to stepping on the accelerator or would shift irregularly. Did everything word for word on this video . Car drives/ shifts smoothly and immediately now . Thank you

Where Is First half of video

Rubbish...36 what?..purple bubbles?

Does this work for Honda CRV LX 2017?

Thank you so much great video!

What size

How to program a remote that's not working....first thing he does is operate the unlock button😂

Cheers mate

Min vän jag görde exakt som du säger ,, men inget skillnad 😢

5 hours to replace? 😅😅 My mechanic did a few in 2 hours.

Thanks mate, just about to do mine

Yes i am also having problem getting jack back into compartment, thank you

Joe Flaherty/OEM Auto Audio is a GENIUS! He seemingly knows everything there is to know about car amps and radios, and he's happy to share his knowledge. In my case, Joe remotely diagnosed my Lexus radio's problem (over the phone) and patiently explained to to my mechanic how to make it work again! I am so thankful -- OEM Auto Audio saved me thousands of dollars and a lot of wasted time. The sound in my Lexus RX450h radio abruptly stopped working. Our Lexus dealer estimated $500 to troubleshoot the problem, and $3000- $5000 to fix it. My local mechanic (whom I love but does not do radio diagnostics) suggested going to a car audio specialist, and getting a work-around system: installing a new amp, and possibly replacing the radio head unit with basically a tablet. While a less expensive solution than the dealer's, the work-around meant that my radio would still be there but none of the buttons would do anything; I would have to control my radio, etc with my phone, through apps. Ugh. Neither choice sounded acceptable so I went to the web where I found a TH-cam video (Suburban Ranch) that said OEM Auto Audio had repaired their broken amplifier. See link: th-cam.com/video/H5kH85xiE5g/w-d-xo.htmlfeature=shared I called OEM Auto Audio and left a message. Joe, the owner of OEM, returned my call about an hour later, and as I started to describe my situation, he stopped me, saying, "I know what you're going to tell me. You were listening to the radio and the sound went out, but your screen still works." It was exactly what happened. He explained that my SUV's radio and amp almost NEVER need repair. The solution was far simpler -- simply disconnecting, cleaning, and reconnecting one of two wires between the head-unit and the amplifier. The first connection is located below the center console/shifter area. It needed to be accessed, disconnected, cleaned, and reconnected. Best of all, I could do this one myself. If not that connection, then access the other connection behind the radio head-unit. My problem was not the first one, so I took my car to a shop (pulling out the head-unit is above my pay grade). They removed the head unit, cleaned the connection behind it, reconnected it and that was it!!! This fix cost no more than a few hundred bucks!!! It's rare to find someone in the car repair world who will tell you the truth. Joe is that rare person. I told him I appreciated his honesty, and he explained he'd rather get a phone call and provide helpful information, instead of having an irate person call about their radio still not working even after he worked on it. I was so fortunate to have found him. Thanks, Joe!

Good afternoon Tell me, sometimes this error appears: DF030(0841F3) Rotor position sensor circuit. It's warmer now and she appears even more often. What could it be? Thank you!

Thank you for the information. I plan to test it in my 2008/2009 Audi A4 B8. It seems there might be an issue with the gears or shifting in my Automatic S tronic. While driving, it appears the gears aren't changing automatically in the D drive mode, seemingly stuck in the first gear I guess because I didn't hear any switch gear little noise. Only on Sport mode and manual mode, I notice shifts based on speed that are switching automatically and it looks good. I experienced a noise when starting my audi in P position today, giving gas for 15-30 seconds. Could this have caused the gear switch problem? Any suggestions would be appreciated.

Thanks!