วีดีโอ

Im attempting this, this week. Any tips?

Best tear down guide for the PS2 50000 series on TH-cam

It was my first time tearing down a PS2 Fat I just got off eBay and honestly a pretty good and easy to follow guide can't really go wrong only thing I'd watch out for is the fan plug can be weak/brittle at the metal prongs and can come off easily if not careful but awesome video thanks heaps

This is the best cleanup of the 50001 on TH-cam! I suppose there is no reason to change out the thermal pad on the EE, and probably wouldn't be possible to put Artic Silver on it or the other chips because there wouldn't be any contact or pressure between the chip and heat sink?

well done

EMOTION ENGINE.

Just want to say thanks for this video. Im going to try to fix my pot as well. The disc does spin. And i know when the gamecube is on long enough, im assuming its heating up. It finally reads the disc. So im thinking its the power of the pot weakening.

Would be nice if you told what part you were using

I got one to mod. It had rust on the metal shielding and was really dirty. It's hard to imagine how dirty a person can be to let things get that bad.

Hi, where do I get a thermal fuse? Good video thanks 😊

WOW! Nice job! Really very interesting to watch. Thanks for taking the time. You made it look easy!

Most people just pop out the front panel ribbon cable and leave the board attached to the front face plate, unless the battery needs replacing.

lol I can’t read Chinese writing 😡

I bought a PS2 Slim today for $20 at my local flea market it’s turns out there’s rust inside of it when I put a disc in it and turn it on I don’t hear the disc spinning when I lay my ear on top of the disc tray not sure it’s repairable otherwise i am out of that $20 it’s one of the last version of the PS2 it’s a 2007 model which was made the year after the PS3 was released.

My finger hurt from putting the wood but your tutorial really helped thank you ❤❤❤

Thank you for the awesome guide . Helped a ton

what a stupid ass place for the cmos battery

Hi, after watching your video I realized that my device might have the same issue. I have a WaterPik Water Flosser Model WP-660UK and it stop working suddenly. Where can I get the Part Number for the thermal Fuse for this model? Thanks for the video it is a great help!

Thanks for the video got my Cube working for super smash bros melee again and now I know I need a new laser

Awesome and simple looking! Now time to install the backlight MOD👍

9:50 Is that vinegar

Help! I have this model PS3 and tore it down because the battery needed to be replaced. I was the first person to disassemble it. I’ve had a fair amount of experience with PS2s servicing my Test station, but this was my first time with this revision. Upon reassembly I’m getting no picture output. Scratching my head as to why….

Very nice, works for me thx.

My GameCube's clock is dying so I go into the menu to set it up but then I notice that the game has not loaded and gives me a reading error but after trying it a few times like 1 or 2 times maybe, it works! Is it because of the battery or is it that I also need to adjust the laser power?

Great video. I think you should have strapped the thermal fuse to the body of the motor like it was from the factory. The purpose of the thermal fuse is to open if the motor gets too hot. Just my opinion.

Thank u I assembled all the gun thanks to you 🙏🙏

I have a Nintendo wii

Total shit, recommend buying a real gun from America instead. Probably made by an Indian scemmer

Oddly enough, your teardown and your assembly made more logical sense than others I had seen. Found it largely helpful in my own attempts. I found trouble in certain steps along the way but your teardown and reassembly side steps all the issues with one minor exception the power button but I'm thinking even in a PS2 Fat that is an Ntsc-U/C I'll be able to do much the same even though the power button is attached to the top shell. Thank you.

Moi ça marche pas ça lance une fois sur dix c’est de la merde 29€ bordel

What's that thing you were holding in your hand at 11:05?

Thank you,I fixed my water pik but it was't the fuse. Was the little pump on the botton with mouthrinse crystalised inside,I pull it out several times and it come off. Cleaned ,little vaceline and works perfect.

No glue needed?

What flux do you use?

What are the chances of the old board being the problem in the first place?

BRUH HOW DO I PUT THE NAILS IN

The PANASONIC EYP-2BN109 FUSE, THERMAL is obsolete and no longer available on Amazon. Do you have a recommendation for substitute?

Nice clean up! Just doing one myself at the moment but a bit more slowly. Did you speed up the video or is your watch running fast???

Dude I repair consoles. I can’t stop laughing from the record scratching and the F-up. I hate when that happens and the e is the hardest case to get open. Hahahahaha.

Hi, I have the exact model as you in this video, I truly do not know why, but it has a little rust near of the control connector. Exactly in this minute of the video 8:54 you grab the part of what I am talking about. What kind of scotch pad did you use? I mean, the grade of that scotch pad. Thank you very much for upload this video, and I apologize for my english, I hope that you can understand my comment. :)

Great video thank you. Any reason why despite turning switch off the motor runs very very slowly.

Man, your so underrated. You just gained a subscriber!

Do you know how to flash an Xbox 360 E so you can play games for free?

I wonder if the old DVD-fixing trick of hot water might help to reduce the appearance of scratches on that top piece. You'd need a large pyrex dish with a flat bottom. But since it's nothing more than plastic, you could use boiling water and a longer submerged time. NIce video.

thanks for the video, decided to revive mine and your video was the only good one that matched my ps2, managed to change the battery and clean it a bit

A very big thanks to kinsteco on lG for helping me recover back my Psn account successfully

Great video man!! My waterpik is back to life!! Thanks a lot!!!!!!!

Well done and thanks for the video, i opened my ps2 today to change the internal battery and I'm using your video as a guide. Hope everything will work after i put it back together Sorry for the bad english

Why You didn't change the thermal grease ? After all, it was more important than cleaning all those plastics...

Thanks very much, you help me the replacement the mine 😀😀😀