วีดีโอ

Is that not dangerous with the fumes of gas ? Using a grinder

I ordered the new hose but I gotta get to school for 2-3 days so I’m wrapping mine in duct tape and coating it with flex seal should workmgood

If you had taken out the middle plenum, it would have made it much easier to work and get the injectors out. But yeah, toasted engine. Sorry bro.

If you have bore score a proper full rebuild of the car engine cost around 30.000 $€£... But then you get practically speaking a new better engine bored up with more horsepower that will not get bore score again. Many that get bore score do the quick and "cheep" fix paying 1/5 of a proper build which will make the car run for a short while until next cylinder also get bore score... So they do that and sell the car so the next victim has to deal with that.

I’m doing the same on my bike found it for $25

You can buy a used engine have it installed for way less then 16000

Porsche couldn't even fit a new window regulator correctly. Ditching the dealer was the most liberating day of my life. I wouldn't trust them with any important tasks AT ALL.

Hope you can get it working! Subscribed

I have a 1999 Boxter that I’ve owned for 18 years. 106,000 Miles. Over the years I had to replace different parts that were old and needed replacing. There are always different parts that will continue to get replaced. Porsche Boxter no matter what anyone says, it’s a beautiful fun car to drive. My opinion is for you to make it a hobby car, fix it and make it pretty. For the $1,000 you spent on the purchase, it’s worth it. TH-cam has all the videos you need to fix it.

Lol I have heater hoes leakage and I was desperately following your guidance but disappointed to see none of them works

Not big deal! Buy the tools and do the job yourself

What pedal you used for the dbw?

Bike is a 1971 TR6R Tiger

Great bike. Its probably not a Bonneville with the single carb, but I actually like the single carb TR6 better than the Bonnie. Easier to maintain and they ride a little nicer in my opinion. Did you change the gear oil and primary oil as well as the engine oil?

Ok I'm just a guy in the comments but you'll get way more views if you edit some of this content and start posting to tiktok. Make a story out of this situation but focus on the most drastic parts of the purchase and situation. You'll need some revenue to cover the costs of the build and on youtube that will take forever for you to start getting ad revenue. Tiktok gives you a chance to go viral if you post once a day. A video like this 60 seconds long explaining how your new car is broke and now cost $16k to fix... its gonna go viral if you make the first 15 seconds of the video interesting and go for about 30-60 seconds explaining the story. Then keep up with short updates daily. Anyone else reading this same goes for you if you have a nice car. Wont work for a 2000 honda civic. This boxster story is very interesting because of the cost to repair the damage.

That's not a Bonneville with that head on it.

For an extra$2,000 you would have an MX5 that would run fault less for the next 10 years

Could also be a cracked/failed cylinder liner. I would go for a replacement engine, probably cheaper in the long run. Good luck!

Does that Kawasaki fuel tank hold up with the JB Weld fix? It's been 4 years now and I would like to know if it worked.

I'm not an expert but I'm not sure that is a Bonneville? Bonnies had twin amal carbs not a single Mikuni or Keihine To make sure have a look at the engine number stamped on the left side under the barrels, Sounds as though it needs a good tune up by someone who knows their way around old British bikes No insult intended

Cool video. Good luck.

Part it out bro people in the U.K go crazy for parts .

Idk. Never taken my 996 to a shop yet but when I work on it I swear it would be best to drop the engine to work on it. Fun stuff! Make some cradles and drop the engine my dude.

I sold my 2002 Boxster S even tho it was running well and no major issues because of the fear of future repairs. Bought a 75 Vette and am amazed at how cheap parts are. Boxster is a beautiful and amazing car. But wow. Scary to own for a normal person.

The single carb version is a Tiger (TR6) they are less common than the Bonneville.

Did bro js say the aura from the Motercycle 😭😭😭🙏🏽🙏🏽🙏🏽

Nice, but still a long way to go. Its running on one cylinder.

For $1000 invested drain the oil, refill with walmart oil non synthetic and filter, buy a bottle or two of RED DEVIL head gasket leak fix, follow the instructions to a T. And watch it fix the head gasket leak. Did this to a Ford Windstar and got another full year of running perfect out if it. Or just buy a good used engine for $2,500 and swap it out

You got yourself a runner! Nice job, take care of her.

Suggest getting a copy of the Works Manual. Parts availability is good through people like CBS. Don't expect too much from the brakes ! Good luck.

You drained the oil from the crank case but not from the from tube,that's why it overflowed..there's a drain plug under the frame tube aswell..nice bike..👍

$127!! I just picked up a 76 for $1300. Thought that was a good deal. You can't fid them for much less around here. Nice deal!

When Murphys law doesn't join the party, it's always a good day.👏👏

Sorry about the bad luck!

Check the air/oil separator first before the head gasket. After that check the AOS and the coils for cracks. Old coils cause many misfires. The head gasket would be lower on my list of possible causes, especially at that low miles.

It a 1987 first year made.

Air oil separator can cause white smoke on start up

YO dog man I took a chance on buying a lexus engine I was lucky 😂😅😊

That's just the beginning you need tons of work you need a new engine power

Btw I forgot to mention to you, those rims (turbo twist) alone go for $1000-$3000 depending on condition and size. 18 inch turbo twist in very good condition easily go for $2500 if not more. So $1000 for the car is a steal!

Mate - Porsches are actually very straightforward to work on. However, you do have to approach them in they way they were designed to be worked on which means doing a little research first rather than barrelling straight in. There are things that you can access from the panel behind the front seats, and by removing the rear wheels access is very straight forward. There are not many things in the repair / maintenance of a Boxster that necessitates a full engine removal. Also if fuel is leaking into the cylinder its going to very quickly cause issues with scoring the cylinder walls - even with a 986 - which would not normally suffer.

I want to see more episodes so for the love of god put a jack stand underneath the car.

👍👏👏👏👏👏

Great job

save the car!!

Sorry to hear that man!! Can't wait to see how you figure it out bro These cars are worth saving!

Btw you should definitely look up “common problems” for that car and year. I’ve seen other YT videos all with the same problem for the 996. It might be the same problem for this car since they’re the same year

Subbed…fix and film the car and any other Porsche you get your hands on. Looking forward to watching. Best of luck 🙏✝️

PART IT OUT = BUY A TURBO SUBARU !

It may not be the head gasket. Those cars have a part where cooland and oil run side to side. When it goes bad, the oil gets milky. I'd recommend you chek that out first. JR garage has a few videos about it. Boxters smoking and how they fix them without need of dropping the head.