วีดีโอ

thank you for the comment. and be grateful for what we got. and that i can share this with everyone. and most of all.... Have Fun.

as I. i raced M<X for 40 years and cant ride anymore. and this hobby is right up the alley. so much fun.. accept. you go out to bash and it breakers in the first 5 minute's.. lmao. but mot often. yes love the hobby. have fun.

and yes the XMaxx wins lol

Thanks brou for the comment. the beeping sound is the DX5C transmitter. I have the timer turned on. It's in the stopwatch mode. It's set for when the throttle is applied over .5% it starts the timer. I use the system for how long a battery pack last. much more precise then looking at a clock and not knowing how much time i have really used. I find good battery last about 13-15 minutes. bad last 4-5 minutes. like i said its true timing used. I think that makes sense. im a driver not a writer. LOL. Have Fun

@@readeracingRC oh, ok yea that makes sense. I didn’t know about that function and I thought surely there is no way you were fiddling with it while driving 😆 I’m starting to put more cars on my Rugged. Tired of dragging multiple radios plus I got 2 of them mixed up and spent forever trying to figure out what was up 🤦🏼‍♂️

actually. i been wanting to use the DX5C\Rugged. There is a function that you do fiddle with while driving. Setting the "E" button and use it for sensitivity. So flying up to the ramp, Push the button and the sensitivity will only turn the wheels small adjustment, so you can keeps the Wheels in a straight line. and after the jump let the button back to normal and you can bash with all the steering. now .... does that make sense ...LOL The whole idea is keep the wheels more straight and approaching the ramp and keep from doing the inevitable Ramp Shaver. i don't like to Shave either way. LOL Have Fun ps i know what you mean by grabbing the wrong remote... frustrating .

That's cool. and funny. even if were on the other side of the globe. bash on brou. have fun

thanks. im finding out the more worn out parts make the issues come bake. Bearings, diff housing, drive shafts, outside hub,,etc.etc. when they all because problem it's time for a rebuild any way. have Fun

wow. i watched it again, and didnt realize how much colorful metaphors i used. lol.. and i was laughing my ass off too. have fun

I got ya Back on the sub. thanks

yes it does. thanks for the comment. means a lot to me.. have fun.

thanks brou. nothing better than getting the bug worked out on the practice track, ready for the BMX track. have a wonderful 4th. have Fun

Pimping. lol. Ya that WAS... a good spot to go. i learned my way around the rc's at this park. trucks and drones. But I ran across a couple cry babies about the truck on there precious dirt. and i moved back to my old stomping grounds. turns out the old BMX track is even better. i'm the only one that know about this new spot. so far no cry babies. lol Have fun

yes it does. but it cost me about as much as a 6S Kraton or Outcast EXB. and some crafty workmanship. I think i have an original. prob only one out there. thanks for the comment, always welcome... lol have Fun

i put the commment in the wrong place, now i see what i did. lol this what i meant. I got them from Amazon. The next set I'll buy will be stiffer strings. Now, mind you I put them on because I launch over 100'. And trying to have less body slap and catch the weight of the car from bottoming out. I thought it was going to be have shitty handling driving it. But as I write this I would almost say it helps the handling. I'm going to pay more attention if what I said was right. Thanks for the question and. Comments. The spring on Amazon was: uxcell Compression Spring - 1.2mm Wire Dia , 18mm OD , 50mm Free Length Spring Steel Extension Spring,Black,20Pcs I'm not sure if it is still the right move. But I haven't had a reason to remove them... Have fun.

@@readeracingRC gotcha. Thanks. I thought you were referring to an internal spring like are in the shocks on the Redcat Ascent.

WHY YES IT IS. I BEEN WONDERING WHEN SOMEONE WAS GOING TO SAY THAT. I JUST FOUND OUT IM THE ONLY RC DRIVER THAT GOES THERE. AND THEY JUST LEVELED OUT AND MADE MORE JUMPS. MADE THEM WIDER. ..I'LL TELL YA I HIT A GOLD MIND TO FIND THIS PLACE TO BASH HERE. HAVE FUN. ps. dammit i didnt realize the cap button was on. lol. not yelling lmao.. have fun

i notice the last set of RPM arms i bought they changed there mold and put a section to put droop screws on. yaaa.. i haven't had the issues yet but i was going to buy or make limiting straps. i been wanting to start putting them on my rigs . i think its a better way of limiting the swing arm from going to far and break more parts. thanks for the comment alway want to be helpful in this hobby. good luck but most importantly... have fun.

@@readeracingRC I just use the shock spring tension to allow droop usually

thanks for the comment. i have done 5-6 just on the e6000 and concrete tape. and half a dozen trying different scenarios and seen very little delamination. I thought the same thing. but the system i have done its works perty tight. a little on the contact points but that is whittled and cut away if it does. i think most of mine are over a year old and still look great. thank. and have a terrific day.

thanks for watchin. i did the chassis about a year ago. and that rig has taken a beating. i break arms more than anything. it like it has to have a weakness. and there is. but the chassis is like unbendable. kinda thinking like a leaf spring on a car. thanks have Fun

i appreciate your checking out the channel. it sucks not being able to get parts. i would assume you looked at my vid about the driveshafts' popping out. the drive shafts are to short. removing the red ring and washers help it from popping out. i went to the extremes and ground off about a 1.5 mm off the ends where the red ring was. i have a video explaining this.; I been turning wrenches all my life, even got to turn wrenches with a couple professional mechanic from back in my motocross days.... The videos... well... not so much. i been doing this hobby for 4-5 years, but making a video is like virgin territory for me. Im hoping they will get better as time goes by. I hope you get parts service gets better with time for you. Have Fun ps. yes hex screws. lol

i found that the more the bearing and parts wears, out it makes the problem come back . (only on 60 foot +) launches it popped out. i went to the extreme and ground off another 1.0-1.5mm of the end of the arm.. where the red ring was. glad it helped you out. Have Fun

Those driveshafts don't get anywhere near bottoming out in the cups. I'm not sure why they don't make longer driveshafts! Thanks again for the tips!

oh really. it is the original heatsink wedge and pried and taped onto get it under the top rail bar? i thought i was original. lol you have the 1100kv hobbywing?

@@readeracingRC Indeed I do, I pried it open a bit so it covers the motor. I also shaved the sides down a bit so I could get it over the top rail bar, then used two zip ties to the motor. I also have the stock fan housing, I replaced the stock fans with Rocket Fans, they fit in perfectly.

Hells Ya. true musicians... the music blow my video's out of the mud. the best one is Red Barchetta. and only fits jumping the cars. if your a true Rush Fan you would know that the barchetta is a flying car he takes out for illegal sunday ride into the countryside with the internal combustion engine which are outlawed a hundred years from now. only Neil could write something like this. Have Fun

@@readeracingRC there are so many best ones! But yes that one is really good!

i paced it out with long strides. 75'- real close to 100'. my biggest flight is 115'. thanks for the comment. have fun

Thank you for the kind words about the jumps. been practicing quite a bit. It all started with the mini Maxx. Racing motocross has gave me an advantage of throttle control, especially launching them on and off the ramp. I like the backflip, I also like the stock ones too. But the way i see it, you have to buy them in pairs. I line most of my trucks with BackFlips, just because the the finance reason. There is always a spares. and not having an odd amount of different W/T laying around. good luck but most importantly... Have Fun

My bad... I missed it by a mile. jesus, I had the Outcast on my mind and i put write up with it, instead of the Xmaxx. thanks. as i think about it, i didnt go to bed last night. I marathoned it so i could bash this morning before is started raining again. (which it is ) have fun

@@readeracingRC haha it’s ok I totally understand I have the Outcast on my mind all the time as well haha such a fun rig 😜

@@StraitJacketRC It always brings your heart rate up launching the big black rig then the green pickle. alway more excitement to a bash session. Have Fun

Hells Ya. any metal cover works. it need the support due to the week way it's designed.

Thanks! Will do! I think my 8S Outcast about a year ago, still no cracks. not quite a basher bodie but close.

yes. i think is close to a basher body... (well maybe not quiet) but very durable. the brush is what makes it so much easier. think i took 1.5 tubes of E6000. but well worth it. the first layer can be roughly done, it's the 2nd layer that does it. good luck, and don't get frustrated. it took me a while to get it right, but now i can do any... xmaxx was tricker..lol

wow. i don't see it on amazon anymore. but ebay item number 11563344458. called gpm steel transition input shaft cush drive 7786. shit and it $37 now.. jeeeeze. at the time it wasn't more than $20. have fan

i just reread you comment. i didnt realize you nut and bolted the plastic cover piece on. good idea. next time i tare it down in putting that to use,

Yes it seams. This truck is a beast. i have only broke 1 arm and a couple minor parts.. it is the "Beast Master" of RC's.

Both steering arms have to be equal length. mine are 123mm from screw hole to screw hole. This may not be the same for you, because i have a set of rear turnbuckles on the front. it took some doing but now i have 5mm wide instead of the 3mm stock ones. much stronger. other than that i m not sure if i answered your question. but having 2 or 3 degrees toe out for better steering capabilities.

absolutely. it's a week point,, there is way to many places for it to flex. which is ok i guess,... but the last place you want weakness is exactly at that point. at least the aluminum gives it more rigitray have fun

you using the new RPM wing mount. i think i have 4 of them mounted. and never broke one sense. mounts from the under skid plate to the wing. perty nice. have fun

@readeracing750 thanks for the info. I'll look into that one. Hopefully, it matches up to the new EXB design.

@@mikejacobs8294 oh shit. I don't think the new EXB RTR is that way. The new RTR has a totally different set up. I thought you were talking about the older version. My Bad

@readeracing750 no problem. It is a totally different design and being so new, nobody has come out with a replacement yet. So I'll continue to bash and wait for Arrma or anybody to make the part. Thanks for responding..

thanks brou. have fun

Thanks 👍... thanks brou. it was nice to get out between the rain storms to do my bashing. Have Fun

I hope your weather holding out. you get nice days there to bash.?

@readeracing750 basically we're in the rainy season here in Southern Spain, almost done, but yeah man along of beautiful days

ya it sure makes a berdon on my hobby. lol but to my surprise i wake up and it's snowing. i guess i best get out there and seize the snow bashing. have fun

ya i hear ya. i had a brain fart between the ears. lol

I got ya covered. subed ya... it's the first drive with the bike to really appreciate it. so much different than a 4 wheeler. taking some practice to get used to it. lol Have Fun

THANK YOU...🙏👍@@readeracingRC

Oh, on the felony and cars with that set up, cut a flat piece of rubber and put it inside both ends of the axle carriers to take up the slack. It’s from the hub starting to wear on the diff side. Doesn’t take much. It’s been a while, but it works. Thanks again.

by putting the rubber pieces in the cup, you mean the same idea as putting the ARA311028 spacers. Right? Personally im not sure why they put the red rings on in the first place. i have never or sean anyone that broke a arm at the end of it. by the hinge pin ya. but not the wheel end. nice chat speedo man, i keep hearing your name about this hobby.

@@readeracingRC I’m like an old retired name lol. I overbuild things that have no reason to exist lol. I use old tire and cut it in circles in a pinch on both ends on the typhon and 6 s road cars. I’m a retired street bike stunt rider that got into the hobby. I’m friends with some guys you may know, maybe that’s why you may have heard my name. I apologize, I was looking for fix for the street cars I forgot I already knew about. But your video is so important! That’s a great pointer and needs to be known about. Thank you for showing people. That’s what the community is about buddy, supporting each other and having fun. Great job! 🤘🏆

@@SpeedSyko thats some funny shit right there. im an retired motocross racer of like 30-40 years. i was flying drones and seen some kids with RC rigs and a light bulb went off and off i went. this is like racing but the crashes are quite painless. ill have to catch up on some of your vids for reference's. lol Have Fun

You set your droop screws to set the arm from dropping to far and breaking the piston. T he driveshaft is to short. it need to be about 1.5mm longer. they didnt take into account when they added the red ring. i have never seen an end blow out with or without the red ring. i think it was a bling to make it look better. but that my take on it.

@@readeracingRC lol I agree. I've never had the issue either. 👍😊

That's how I took that as fact or the actual problem, thanks for the info I will do that...I'll put those washers back on and adjust the droop!!! 👍👍

You bet-sha. Have Fun

And they didnt fix the problem even in the latest version if the 6S line. they made it look like they fix the issues by beefing up the drive shafts, but in fact the driveshafts are still the same length and the drive cups. lol oh well.