วีดีโอ

I didn't but if it's zoom65, it should sound similar. Other than that, it will depend on the build you have.

@@lunosama thanks master 🙏

I think it was the stock gateron brown switches that came with the keyboard

Yeah keep it for atleast 5-6 hours. And comes right off. Also don't keep it for too long cuz I did that to one of my screens and the polarizer film peeled off as well

I forgot to film the rest of that part, but it is to remove the anti glare film. You have to keep a wet towel for at least 5-6 hours and peel off the anti glare coat. Don't keep it for too long cuz the polarizer film can peel off too

okay got it!!

Thank you 😊

Yeah, so the small board I mentioned in the video, has a VGA port. I connect that to my pc like how you would for a regular monitor

PC plate, no tape mod but used all foams that came with zoom75 and one of the foam with holes sticks at the back of the pcb like a tape mod. Also used internal metal weight

This video has the full build process, but with WS morandi th-cam.com/video/fNl5mKlJEIk/w-d-xo.htmlsi=44YbfE8lS-GljwXe

Yeah lubing them doesn't make much of a difference. I used mine stock for a good amount of time

Hi, I'm not sure if I translated your comment properly, but if Google translate is correct, you mean to say the board that displays LED lights is made of wood? I thought the same too, until I peeled off the sticker. You have to peel it off, and underneath it is a transparent board that displays the led lights like directions and such

@@lunosama you are right. I finished realizing it only 5 minutes ago. What is true is that it is not weary well explained. Anyway, thank you very much for your comment

@@pierreortais3306 no worries. Glad it helped

Oh they have detailed pictures and description in meletrix's product page. They're well labelled.

You have to type the model name in their website. You'll find all the instructions and codes there

Thank you very much , but we have done this on their site . miniTank Robot upgraded V2. Nr KS0428 . Could not find any code. The tank is ready to drive but the code missing .

Same problem as I have

@@inekelindeman8416 just a second. Lemme find the link

@inekelindeman8416 this link will lead you to their code package. It's from the official site www.dropbox.com/sh/yfip8hquyfmi54m/AABKg9NwAfz0v0mE1xK_vmVHa?e=1&dl=0

Yeah, personally, I make less typos on low profile Keyboards, but the sound, cherry profiles the base standard now

Are you saying the keycaps get stuck and doesn't come up after pressed ? If that's the case, it must be your switch. Try swapping the springs of your switch to a 70-80g spring. That's the cheapest alternative to make it work instead of purchasing a whole set of heavy switches.

@@lunosama No, the switches bring it back up easily, its literally the cerakeys caps lock is too far to the right if that makes sense? It just doesn't fit on the board.

@Squander. ahh. Got it. There are 2 ways to put the caps lock switch. Did you try both ways?

@@lunosama No, that's probably it, I'll try it

@@Squander. yeah hope that works

You can type the model name in their website. You'll find all instructions and code there. Sorry for the late reply

Yeah, it's recommended to use heavier springs. Stock morandis were a bit light for these keycaps.

@@lunosama really for all of them? Even 1U keys? Did they struggle to bounce back with typing or felt sluggish?

@Cloudypoo 1u keys come back fine. It's just that it takes just slight presses to activate it. And the shift keys get stuck at times

@@lunosama awesome bro thanks for the reply

@Cloudypoo just to clarify, I meant stock morandis with cerakeys. With normal pbt or abs keycaps they work just fine. Have a good day 😊

It's a non flex cut. I've never tried a flex cut before which I should one day

Also Very nice video! Thank you

haha, check if you are using the fifine microphone when you're recording. Sometimes, the software you are using will opt for the default microphone which may not be the fifine. Alternatively, you can set the fifine mic as the default one. lemme know if this helps

@@lunosama sadly that isn’t the problem, as i make sure to check that before recording. i have a amazon usb mic that does okay but tends to pick up background noise or sounds like humming or buzzing? even in obs with filters. so was hoping to use this mic instead but even with knob up, and volume plus gain in lbs turned up a bit it doesn’t pick it up

@@blackb3rry02 hmm, im not sure what the problem is. Ill let you know if I find anything

And prolly the only one 🤣

Gateron milky yellows, not so much. You can hardly hear the difference. But switches like KTT Hyacinth linears, huge difference

That's hyper X pudding

@@lunosama ohhhh, i see it now, i like the different sound it has when it bottoms out. thanks!

Oooo, that depends on your preference. For me, I like sound of cherry, xda and osa, and looks wise SA and Osa . Sorry if I confused you haha

Yes they are

Tape does help give that deep sound and it's an easier method. One of the effective way is to paste a little bit of tape on the ends of the stabilizer wires and lube it. Gives a deep sound

Yes it's posted on my channel. I only have a few videos so you'll know by the thumbnail

Yeah they're meant for south facing LEDs so illuminates perfectly.

Yes

Keychron coiled cable

All foam, internal weight, cherry profile pbt keycaps. And I usually use KTT Hyacinth switches for a creamy clacky sound

@@lunosama I love this two switches and I also prefer Hyacinth a bit. Have you got any other alternatives with similar sound?

@@konikop11 i ordered durock l2 67g switches, from other review videos it sounds like ktt hyacinth. Ill compare it when I get them with oil king v2s

Hi, I don't think it's good enough for selling cuz, taking apart this board will prolly only damage the paint and all.