วีดีโอ

have ridden with the phone mounted pretty much daily with my commute and it has not messed up the camera at all. and i’ve gone through two phones since first installing this. the iphone 13 i started with and my now iphone 15. solid work from peak design and even better now with their updated mounts and charging capabilities. - Jon

I did not like the media mod for the reasons you stated. It drains the battery and it was a pain to swap batteries. I have been using the mic adapter and have a power bank in my jacket to keep recording for longer periods.

​@@redhawkadventures8526 But, in several experience when I tried the method what you did, record the footage while charging it affected a little bit lag when I reviewed the result video in my laptop. It made the frame rate of the footage unstable or in other word made the fotage lagging.. So, I decided not to use media mod anymore, then I went to Mic Adapter and I purchased a lot of batteries in e-commerce. Wkwkwkwk... I just waste my money. So fu*k*ng hurt. My wallet is out of money.

I have the pro. I have the link in the first video when I go over the gear. I don’t know the differences between the pro and non-pro. I just a helmet I liked at Cycle Gear.

@@redhawkadventures8526I would like to give my personal view based on my experience and my friend's experience who has HJC RPHA 11 Pro. Because RPHA 11 Pro has already been certified by DOT in Indonesia. But RPHA 11 only has ECE REG 22.05 safety certificates. So, this why RPHA 11 more lighter than RPHA 11 Pro.

Yes, one for the Sena and one for the GoPro.

Thank you. It took some work to setup under a tripod and make sure I could see what I was doing.

They have replaced the 50 utility app with the Sena Motorcycles app now. Look for the new app and it should work.

@@redhawkadventures8526 many thanks will do.

There is a recess in the side of the helmet for the speakers to go so it doesn’t press up against your ear. It also has some Velcro so you can just stick them on. The check pad has a cut out as well so it doesn’t effect the sound at all. I hope that helps.

@@redhawkadventures8526 thank you. I have a shoei x14....will take a look.

The pole I'm missing is the C shaped horizontal pole, it bring out the headroom in the tent. Unfortunately a hiking pole won't work. That is a good idea to bring out the front of the rainfly. I haven't done anything with cycling videos yet but I will keep it in mind. Thank you.

There are two options to add the Aux port, either the media mod or the mic adapter. I was using the media mod for this video. That might be why it looks like it was in the GoPro. -Chris

Thank you. God bless you. -Chris

The updates to the 22 were good, it’s nice Harley listened to riders. The 2023 model has some other updates due to customer feedback. I have looks at upgraded exhausts but haven’t settled on one yet but I’ll check out the V&H, thanks for the tip. -Chris

We have another video with the 50R that shows the installation. The process is the same. I hope that helps.

Yes. I have it connected to my phone and the motorcycle at the same time. I’m pretty sure you can do it to tell phones as well.

@@redhawkadventures8526 what does it says ? When you connecting them ? First time it's says phone pairing and the second times what does it says ? I can't find it anywhere

Thanks for the review I actually ordered one right now

It usually says phone connect then device connected.

@@redhawkadventures8526 thanks a lot I will see.. it's not that important I could do without it but it will be nice if it works cos I use one main phone for calls and music and second for gps

I hear you. It’s been a long year. I’m working on getting a video out soon. Now let’s both get on Jon to get a video going too. -Chris

The GoPro 10 comes with one and Chin Mounts also sells one with the screw in the opposite side. I believe I used the one that came with the GoPro. -Chris

I hear you, that’s why we both went with the Peak Design. The Rockform seems to not be as good quality and Quadlock only recently updated their bulky case after PD came out with their Slim Lock design. PD also now have a ball adapter mount so if you want to use the Ram mounting system you have that available now too. Ride safe and not “too fast” lol -Chris

I agree, they dropped the ball but with the way Triumph is with these limited editions they wouldn’t have done anything by the time I was told the news. The Bond Edition would have been around $21k. In the end I’m happy with the Pan America and glad I ended up with it. -Chris

It’s the Media Mod, it seems to work well but might be draining the battery more than normal. I’ve been trying to get the mic adapter to work that should fix the issue

@@redhawkadventures8526 have you tried any other housings on it with your helmet specifically? Im looking to get some sort of housing but want to make the right choice for it being on my helmet

I haven’t tried anything else on it. Most housing seems bulky or too weak to serve any purpose. Since I have the GoPro subscription they will just replace it if it’s damaged so I’m not too worried about that.

@@redhawkadventures8526 Thank you

could not be happier! scratch that, i could. if only the arm was a teeny bit longer. but other than that 10/10 from me. - Jon

I found that to be true on the first set up but the new Sena app seems to be easier to use and I had less issue with it. I have my Pan Am tied to it as well so I just use the controls on the handbar which is far better than the on device ones. I agree the Sena controls aren’t the best.

I got it from Amazon, it is a basic Olympus ME-15 mic. Works well enough

Hallo, I just used Intercom Ejeas V4 Pro, so, the headset of its, I just modified it by adding an external jack audio straight to the left headset with TRS Jack to the Mic Adapter for GoPro Hero 8 Black.. I bought the intercom at Tokopedia. (Indonesia)

Both have great technology and unique features. The Pam Am is a bigger engine and closer to the Tiger 1200. It’s a little hard to compare the ride for me since I never got the chance to ride the Tiger 900. The Pan Am has been able yo handle what I have put it though so far, love this bike.

I haven’t seen anything on the nt1100 but it looks good. Honda has always made reliable engines. The 900 GT pro is great too. You have some good choices there.

Thanks for the sub! Luckily nothing to disastrous, just thought I would have a few more bikes to record. 100% happy with getting the Pan America, glad to see another Pan Am rider. Those 1200 sportsters are nice, I want a potato-potato machine at some point too. -Chris

Just got it a few days ago and got it all hooked up to my helmet nice and secure. I’m really looking forward to making new videos with it. Glad you enjoyed the video! - Jon

OH MY GOD! First off Max, you’re a genius because this is hands down the IDEAL motorcycle mount and I have no complaints for it as of yet. I am absolutely LOVING it! Chris and I have loved everything Peak Design for some time now and were super stoked to see you guys were releasing the Mobile Line because it meant EVEN MORE awesome stuff to buy and absolutely love! All of your time and hard work really paid off (as usual) because it’s incredible and has me wanting to get pretty much all the accessories from the Mobile Line. I really appreciate you checking out the video and sharing your input! - Jon

I can second that. Huge fan of Peak Design. When we saw that the mobile line was coming out AND had a motorcycle mount our conversations on what mount to get were settled. The case is great and ordering the motorcycle mount for myself very soon. -Chris

@@redhawkadventures8526 Well shucks, thank you to you both for the kind words! I'm really thrilled to hear this! I put a lot of blood and sweat into this product and countless hours prototyping and developing it, and it's really rewarding to see when people like you pick up on the details! Ride safe, hope you continue enjoying it!

Hey Max, are you guys planing on adding a wireless charging mount as well? thanks

I wish there were mounts for 1 1/2 inch bars. That size is pretty common nowadays especially with Harley owners. Either that or a mount that will just screw in to the left or right hand control clusters. I really want one of these but it just won't work for me sadly.

It’s the HJC RPHA 11 Pro Helmet in matte black. I have the link in the description if you want to check it out. -Chris

Thanks. The Bond Edition was the best looking version but on to other things. I may have found another bike already. -Chris

Unfortunately if you want an external mic plugged into the GoPro it will no longer be water tight. This should still be good in rain (I will be testing that). The best option if you want the GoPro water tight would be to record audio separately and sync it in post. -Chris

Thanks! -Chris

Thankfully! Definitely enjoying it so far! -Jon

Spreadsheet are powerful, it makes a great planning tool. Thanks -Chris

They are there so emergency services can remove the helmet while keeping your head secure. It prevent any further or potential head/spine injuries. -Chris

Glad you enjoyed it! The case is super nice and I’d recommend checking out the rest of the Mobile line by Peak Design to see out all the other accessories they have like wall mounts, tripods, dashboard/vent mounts for cars, attachable wallets, and so much more! I can’t wait for the GoPro either ;) - Jon

Thank you! -Chris

Thanks! I’ve been on getting into a proper groove production wise and definitely think I’ve got something locked down for my next video! - Jon