วีดีโอ

Hey I hope you see this asap. If you cut the cable the window will move freely. This way you can pull it up and keep it shut with tape or a wedge. This has worked for other customers. I have also seen where they cut the cable and was able to pull the window up and secure or fasten the cable in a way that keeps the window up. Just depends on your situation but I agree. No way would I want to drive around with the winter weather and the window not working. Best of luck to you.

@@callsforservice219thank you very much for your answer!

It’s likely the regulator not the motor. The motor can go out but it’s more likely the regulator. The cable driven regulators are prone to failure when the cable looses tension.

I suppose if the truck has it equipped it would be behind the seat or under.

Thanks for the feedback

The factory tinted glass (AS3) is cooked into the batch material of the glass. Only the aftermarket tint is film applied to the glass. The factory tint can not be removed unless you replace the glass with a non-tinted glass (AS2)

You are correct. Sorry about that. I don’t recall why I edited it that way. At 3:40 I removed a 10mm bolt. That is the lower fastener that holds that glass in place. Once you remove that bolt you should be able to pull that glass toward the body of the vehicle and remove it. The vent glass is molded together with the rubber around the door glass. We sell those in our eBay store.

Thanks for the feedback. We have R&I the 1/4 with success. I use the GT tool quarter cutter from the inside. I did loose some of the interior where it made sense to pull it. I didn’t remove everything. I’ve had serval I’ve done. The first one was nerve racking for me.

@callsforservice219 I have the shop pull the interior. Might as well since it's a shop that works well with me. I was able to cold knife just the tops from the inside, and then I just ran my Orange bat, and saved all four setting pins on both. Thanks again.

Thanks for this video man it was helpful im from the valley in texas where you from

@@JavierGarza-vb7kw We are in Central Texas. Killeen Texas. Fort Hood.

@@callsforservice219 nice Man ill be watching your videos

I’d say I can sell you some but it would be easier just to go to the source. Equalizer has some on their website.

It’s true. You can’t see out the glass it’s there for cosmetics.

I wish I knew what happened to him. It was 21 years ago this year I think. I’d love to get in contact with him to let him see how much we’ve grown as a company

So if it rolls up and down just fine except for that top inch or so my first guess may be something is getting hung up with the regulator inside the door. Some sort of obstructions.

I believe this one was a 2005. I may be wrong. I know that the 04-10 models is what I was demonstrating

@@callsforservice219 Good job! I just did quarter glass replacement on my 2014 Toyota Sienna L. It was somehow less complicated. th-cam.com/video/jezhhiw0FM8/w-d-xo.html

I was sort of under the impression that he would have to take the limo to Houston to where they assembled it to get that glass replaced.

@@callsforservice219 makes sense. That would be like a 1000$ delivery for glass.

I don’t think it would even make the trip being shipped without getting broken. Even if it did it would have to be a freight company. I said UPS in the video but they would never deliver something like that lol

That’s a bummer. Unfortunately older vehicles with plastic clips breaking has happened to me as well.

Thanks for the feedback

I’ll have to work on that

th-cam.com/video/-LukwUa6lWw/w-d-xo.html - Just did on my Sienna 2014

Thank you for the feedback

I appreciate the feedback. Thanks for watching and glad it helped.

@@callsforservice219 Don't know how it got busted but Toyota wants $385. & going to another place in the morning to see for $275. but I'll let you know. In New Orleans area. Thanks again 👍

@@T-coon Thanks for the feedback. Save me as a seller on ebay. My link for our store is on my youtube page. Glad to get you what you need salvage in the future.

@@callsforservice219 $422 for passenger rear 1/4 window on 04 Sienna CE from Toyota parts; but it was tinted & don't think it even fit; so returned today & going get another tinted😞 put in tomorrow early. They're saying $275. But we'll see. Have everything out of way & plastic board duct tape over opening. I didn't know how to install window to yucky black glue at the same time as the hinge side ? But I will ask the guy at the shop if I can watch or explain so that will be interesting. There's also another item that I'll send pics of a diagram 👍

So based on the info I can look up at the moment, the right rear door in the video is a DD11169YPN. That part will fit the 2007-14 GMC Sierra crew cab as well as the Chevrolet 1500 4 door pickup 2007-2013. It will also fit the 07-13 avalanche, 07-14 Suburban, and the 07-14 GMC Yukon.

I just like to troll Safelite a little here and there.

Thank you for the feedback. Really appreciate it.

@@callsforservice219 instant sub too. :)

The Saturn is another excellent example of vehicle that is trouble for the wiper linkage. I’ve had trouble with those breaking removing the wiper blade as well. Sounds like you may have found an effective repair for that as well.

Wow that’s awesome. Glad I could help

Do you need a glass? I’m pretty sure I can find you another glass from another Saturn?

There was a bad hail storm. I was there to put a new windshield in. The paintless dent repair guys had already dropped the headliner to repair the roof. It’s in the way lol obviously. Minor nuisance to say the least

Wow glad we don't get a lot of hail here. The two craziest windshields I've replaced so far are where a turkey smacked the windshield and where someone accidently shot through the windshield 🤦🏻‍♂️

You have to replace the windshield because the headliner is in the way? Why is that?

@@danielbash3002 Nope I was replacing the windshield because of hail damage. The paintless dent guys got to it first. They dropped the headliner to pop dents. Having the headliner down is a minor nuisance for me. Drives me nuts. lol

@@callsforservice219 oh I understand now. Oof, that would certainly make it more difficult 😬

Holy cow. Thats the best comment on a video I’ve done yet. I really appreciate the feedback. I’ve been doing auto glass since 1998 and really enjoy what I do. So glad you found this video and it helped out.

I literally yelled "thank you sir" when I got the damn plugs out.

Glad it helped

Im going to in a few months

Im falling in love with it more and more

The 2003-2013 avalanche are great trucks. I had a buddy that I met because of his Avalanche.

Nice job 👍

Thanks

It’s the best tool in my box for that lol

They line up a particular way. I have noticed after doing many of these that there is a variety of these headrest holders. Some of them have a flat edge and it faces toward the back of the cab toward the glass. Otherwise look at the stem of it if you will and there is a notch that lines up with the hole that it goes in. Just push to snap in. I should have demonstrated how it goes back together. Thanks for the feedback

I'm working on a 24' LTZ, they're a bit shorter with the leather upholstery., Be careful when putting them back in. Because of the leather, but they face backwards towards the window.