- 27
- 15 887
Eric Hakes
เข้าร่วมเมื่อ 31 ม.ค. 2014
The REAL Southernmost Point of Mainland New Zealand
Taylor and I continue heading south, all the way to what claims to be the southernmost point in New Zealand, and then we continue south to what we think is actually the REAL southernmost point in mainland New Zealand.
มุมมอง: 14
วีดีโอ
Taking a Boat Tour of Milford Sound
มุมมอง 10312 ชั่วโมงที่ผ่านมา
Taylor and I take boat tour of Milford Sounds. The 2 hour tour took us all through the Fiord and we got to see some dolphins along the way. After the boat tour, we drove out of Milford and headed to our camp for the night, which was back towards Te Anau.
West Coast Waterfalls
มุมมอง 8821 ชั่วโมงที่ผ่านมา
Taylor and I found some awesome waterfalls while driving over Haast Pass, through Mt. Aspiring National Park. After a few days of continuous rain, everywhere we looked had water flowing. We made our way over Haast Pass and over to the Queenstown Lakes District.
Exploring Fox Glacier and the Southern Alps
มุมมอง 80วันที่ผ่านมา
Taylor and I see what we can of Fox glacier. The weather made it difficult to get a good view of the Glacier. We did get an awesome view of the Southern Alps and Mt. Cook. We stayed at a nice campsite at Gillespie's Beach which overlooked the mountains and had a cool beach. We did a small hike from our camp to look at an old mining tunnel that leads right to the ocean. The weather never lifted ...
The Best Free View of Franz Josef Glacier
มุมมอง 22814 วันที่ผ่านมา
Taylor and I hike to Alex's Knob to overlook Franz Josef Glacier. We got lucky and had to fight through some snow on our way up. The view was worth the effort and we got to see the Glacier so much better than we did the day before when we just did smaller hikes. Without paying for a helicopter tour, I believe this is the best view we could get.
Exploring Franz Josef Glacier
มุมมอง 21314 วันที่ผ่านมา
Our first day in Franz Josef Glacier, checking out some quick hikes near Franz Josef Glacier. These smaller hikes did not get us a great view of the Glacier, so we are planning to do a larger hike to get us a better view. We then hiked to a old mining tunnel just out side of the Franz Josef Glacier town. It was a cool little hike and we even got to see some glow worms (go pro barely did). The t...
Hokitika Gorge and Hot Springs
มุมมอง 17121 วันที่ผ่านมา
Checking out Hokitika Gorge, near our campsite we stop at a small waterfall before heading to Hokitika Gorge. After Hokitika Gorge, we kept heading South and explored some unnamed hot springs along our route. It took us a minute to find the hot springs.
Pancake Rocks
มุมมอง 4821 วันที่ผ่านมา
Checking out Pancake Rocks Rough weather made for a cool visit
Nelson Lakes National Park
มุมมอง 3921 วันที่ผ่านมา
Checking out Nelson Lakes National Park First stop was Lake Rotoiti, a beautiful lake that reminded me of Glacier National Park in Montana. Next lake was Lake Rotoroa, another sweet lake in the park. We camped on Lake Rotoiti and left the next morning. On the road we stopped to see a couple waterfalls.
Abel Tasman National Park
มุมมอง 6721 วันที่ผ่านมา
Checking out Abel Tasman National Park Taylor and I camped close to Abel Tasman National Park and caught a nice sunrise. Then we hiked along the coast for a few hours and saw some nice beaches. Next day we headed to another area of the park and hiked Wainui Falls and camped on the far end of Abel Tasman National Park
Kauri trees, Suspension bridges, Rivendell
มุมมอง 5528 วันที่ผ่านมา
Heading South to catch the Ferry to the South Island. On the way we stopped and saw the largest Kairi trees in New Zealand, over 2,000 years old. We had a cool camp site near Lake Taupo and then saw where they shot some of the Lord of The Rings
Exploring Cape Reinga and New Zealand's Northlands
มุมมอง 50หลายเดือนก่อน
Exploring the Northland Region of New Zealand. Going to the Northern tip of New Zealand - Cape Reinga, Te Paki Sand Dunes, Skeleton Bay. A bit further South we stay at Matai Bay campground and see the Southern Lights (GoPro missed most of these) and have morning coffee. Finished off the trip with a nice hike up St. Paul's Rock and enjoyed the view. Re-uploading because the first video was messe...
Riding the Cook Strait Ferry - Wellington to Picton
มุมมอง 42หลายเดือนก่อน
Taking the Ferry through Cook Strait from the North Island, Wellington, to the South Island, Picton. Nice ride on the ferry, Taylor found some starfish once we got to the South Island.
New Zealand Fur Seals
มุมมอง 90หลายเดือนก่อน
Heading to Cape Palliser and seeing a bunch of baby Fur Seals. The we head to Wellington and prep for our ferry ride to the South Island. We did a small hike there and saw more Fur Seals.
Peacock Farmhouse Chowder
มุมมอง 45หลายเดือนก่อน
Cooking up some peacock that I hunted in the Northland Region of New Zealand. Taylor and I made a peacock farmhouse chowder, a soup that I've cooked before with chicken. We used just the breast meat for this and it turned out better than expected. Everyone we asked, including the individual that took us hunting, said peacock was horrible, but we wanted to give it a try. This was a younger male ...
New Zealand - Bay of Plenty and Matata beach
มุมมอง 31หลายเดือนก่อน
New Zealand - Bay of Plenty and Matata beach
New Zealand - The Coromandel Peninsula
มุมมอง 110หลายเดือนก่อน
New Zealand - The Coromandel Peninsula
V10 Mustang Wiring work and Test Drive
มุมมอง 524หลายเดือนก่อน
V10 Mustang Wiring work and Test Drive
Volvo S60R walk around, startup, and driving
มุมมอง 1.7K3 หลายเดือนก่อน
Volvo S60R walk around, startup, and driving
V10 Mustang Start Up and Troubleshooting
มุมมอง 3.5K5 หลายเดือนก่อน
V10 Mustang Start Up and Troubleshooting
Kubota B7100 Stump Removal and New Tires
มุมมอง 8K5 หลายเดือนก่อน
Kubota B7100 Stump Removal and New Tires
Everything seem so still & quiet during this time of year.👍
Wow!! Very nice video. The views are awesome. Thanks for sharing. subd & 👍7
Thank you, glad you enjoyed!
Do the mahi get the treats!!! Great work and great views just awesome!!!
Love it! Valve ticks like my v10 excursion too
I'd check the fuel pressure bub
How too use a sewzall with a tractor sitting close by
Very nice video. Thanks for sharing. 👍5
New channel to me, so was wondering how you were going to present the video. Actually enjoyed sitting back and watching you both enjoy a walk along the coast. I'm based in the UK and in my mid seventies, and care for my wife, so don't believe I will ever manage to visit New Zealand.
Thanks! Glad you enjoyed it!
Are those island inhabited? The little ones?
Looks a heck of a lot easier going down!!
Ecu
I tried a different ECU before this wiring work and it didn't run any differently. I am thinking once i get the MAF sensor wiring double checked it would be a good idea to try the other ECU again
Please keep posting updates, im super interested in this project as ive been considering doing the same with a 3 valve in a new edge
Very cool, what driveavility issues were you seeing on that test drive? Also any insight on the mechanical fitment. What did you do about motor mounts? Flip them or move one back and use a relocation bracket and a custom mount? You running the stock v10 manifolds? Stock or tubular K?
Thanks for the comment. No major issues on the test drive besides the engine lagging. In the past, the engine would die at stops if I let off the gas but this most recent test was the most "normal". Motor mounts were aftermarket 4.6l V8 mounts (stock would have worked) and were mounted on the back set of holes. On the passenger side (I think) I had to weld a bracket to move the motor mounts back. The driver side (again i think) had holes in the block for the mounts to bolt right up. The mounts bolted right into the stock k frame, I eventually want a tubular one but haven't wanted to spend the money on it just yet. It has stock manifolds but I heavily modified the driver side to get around the steering linkage. This manifold will not be a realistic ling term option. My modification cuts down on the flow a good bit and I need to get a better manifold made (likely custom).
@erichakes323 very cool!!! I am assembling one and it will be going in a 94 gt. I had the same thoughts as you about one side going in the rear holes and the other needing a steel plate to relocate it further back. I have a UPR tubular K for it to go on for extra room. Good to know about the stock manifolds, I imagine they would be difficult to work with. I may try and use a set of 4.6 bbk long tubes and ratchet the collectors together and add a primary to the front and just tie it into a pipe behind it
U cant replicate what ford did. That was lighting in a bottle
WE WANT V10 MUSTANG RAHHHH
I was looking into doing this swap but all I hear are horror stories. V10s are really cool unfortunately problems aren’t lol
Ford actually made one with a v10 running dual v10 Ecu’s I believe. From the v10 pickup
It was a one off engine. 5.8 with 4v heads. The ecu's ran like two 5 cylinders
🤯
We need more vids of this I got mustang 2004 i wanted to do this swap to
Ford did this as a prototype back when new edge firsr c0ame out. They used a aluminum block with cobra r v10 heads (impossible to find). It had a crossflow dual intake. Powered by 2 ecm's. One for each bank. NA it made nearly 500 horspower. Thanks to Obama this was shelved and a good reason why new edges didn't come with loads of hp from factory.
So awesome!
Any progress on this?
We want to see that V10 mustang lol
Cuh got a teeter hang up, lol cools build I search TH-cam for 2 days until I found this video I want one with a wide body
Dashes indicate loss of pats, did you do a delete? Could be a ground issue too.
Sensors never go bad. Crank nor cam.
That code is because of the misfire, it’s a rabbit trail. Don’t chase the 0340 code.
What trans did you use.
Sounds like fuel delivery problem. What year v10, some years uses consistent rate pump, and fpr, some years used computer controlled pump pressure and fuel pressure sensor
Man keep posting, this is awesome.
Definitely different & interesting swap. Hope you get it sorted out soon.
Guarantee you this was not worth the time TH-cam do not recommend
dont care
How did you setup your motor mounts? Custom? Flip them over? And is this spliced to use the factory mustang gage cluster?
This was not a video on how to remove a stump, rather it was a video on how to abuse a perfectly good Kubota tractor. Suggest you have look at some YT videos on how to remove a stump.
id start by getting a wire schematic of the old truck. then check all your ground wires and make sure to run a ground from the engine to the chassis if you haven't already. just use the K.I.S.S. method. (keep it simple stupid) first grounds, fuel pressure, a data logger to get into the sensors and see what the sensors, fuel trims and what the timing is doing would also help. Good luck!