- 67
- 48 403
Hybrid DIY
เข้าร่วมเมื่อ 11 ก.พ. 2013
How to Install a Ring Video Doorbell Pro | Step-by-Step Guide
In this video, I walk you through the complete installation of my Ring Video Doorbell Pro! I cover everything you need to know, including:
• Turning off the power for a safe installation.
• Connecting the Pro Power Kit inside the doorbell chime.
• Removing the old doorbell switch and prepping for the new one.
• Drilling and mounting the Ring Video Doorbell Pro to your wall.
I also share why I chose the Ring Video Doorbell Pro to work with my existing bell system. Plus, I give a sneak peek of the setup process, which I’ll cover in the next video!
If you’re interested in upgrading your doorbell transformer, check out my previous video on that topic on my channel.
Don’t forget to like, comment, and subscribe for more helpful how-to videos!
#ringdoorbellcamera #ringdoorbell
• Turning off the power for a safe installation.
• Connecting the Pro Power Kit inside the doorbell chime.
• Removing the old doorbell switch and prepping for the new one.
• Drilling and mounting the Ring Video Doorbell Pro to your wall.
I also share why I chose the Ring Video Doorbell Pro to work with my existing bell system. Plus, I give a sneak peek of the setup process, which I’ll cover in the next video!
If you’re interested in upgrading your doorbell transformer, check out my previous video on that topic on my channel.
Don’t forget to like, comment, and subscribe for more helpful how-to videos!
#ringdoorbellcamera #ringdoorbell
มุมมอง: 96
วีดีโอ
How to Upgrade to a Google Nest Thermostat: Wiring Guide for Beginners
มุมมอง 16914 วันที่ผ่านมา
, I’ll guide you through the step-by-step process of upgrading from an old thermostat to a Google Nest thermostat. You’ll learn: • How to identify and connect each wire. • Properly wiring the thermostat to the furnace. • Tips to ensure everything works perfectly after installation. Important: Always turn off the furnace before starting any wiring. Stay tuned for the next video, where I’ll show ...
Upgrading My Doorbell Transformer to Support a Ring Video Doorbell
มุมมอง 1.2K14 วันที่ผ่านมา
In this video, I upgrade my doorbell transformer to prepare for a future installation of a Ring Video Doorbell camera. The Ring doorbell requires a 16V30VA transformer for optimal performance, but my current transformer is only 16V10VA. I walk you through: • Locating the existing doorbell transformer connected to the side of my electrical panel. • Removing the old transformer and installing the...
TPMS SERVICE REQUIRED (MITSUBISHI OUTLANDER) Part1
มุมมอง 188หลายเดือนก่อน
TPMS SERVICE REQUIRED (MITSUBISHI OUTLANDER) Part1
TPMS SERVICE REQUIRED (MITSUBISHI OUTLANDER) Part 2
มุมมอง 168หลายเดือนก่อน
TPMS SERVICE REQUIRED (MITSUBISHI OUTLANDER) Part 2
Do you know why there is no CAN at the DLC?
มุมมอง 406 หลายเดือนก่อน
Do you know why there is no CAN at the DLC?
Ignition coil and spark plug testing with QDB-2A
มุมมอง 2.3K7 หลายเดือนก่อน
Ignition coil and spark plug testing with QDB-2A
Hscope, Hs402 Wifi, Hs502, DIY oscilloscopes
มุมมอง 1.2K10 หลายเดือนก่อน
Hscope, Hs402 Wifi, Hs502, DIY oscilloscopes
How to Change the Oil on a 2014 Honda Civic 1.8L | Step-by-Step DIY Guide
มุมมอง 9610 หลายเดือนก่อน
How to Change the Oil on a 2014 Honda Civic 1.8L | Step-by-Step DIY Guide
Oil change, Routine maintenance reminder reset Mitsubishi Outlander V6, 3.0
มุมมอง 4911 หลายเดือนก่อน
Oil change, Routine maintenance reminder reset Mitsubishi Outlander V6, 3.0
Brake noise, seized caliper pins, Mitsubishi Outlander V6 3.0
มุมมอง 3211 หลายเดือนก่อน
Brake noise, seized caliper pins, Mitsubishi Outlander V6 3.0
Drive belt replacement Mitsubishi Outlander 3.0 (V6, 6B31)
มุมมอง 2.8Kปีที่แล้ว
Drive belt replacement Mitsubishi Outlander 3.0 (V6, 6B31)
xtool anyscan. checking tires pressure on Mitsubishi Outlander
มุมมอง 371ปีที่แล้ว
xtool anyscan. checking tires pressure on Mitsubishi Outlander
Motor mount Mitsubishi Outlander 3.0 S-AWC
มุมมอง 192ปีที่แล้ว
Motor mount Mitsubishi Outlander 3.0 S-AWC
Timing Belt Replacement Mitsu Outlander V6, 6B31. Part2
มุมมอง 2.6K2 ปีที่แล้ว
Timing Belt Replacement Mitsu Outlander V6, 6B31. Part2
Timing Belt Replacement Mitsu Outlander V6, 6B31. Part1
มุมมอง 13K2 ปีที่แล้ว
Timing Belt Replacement Mitsu Outlander V6, 6B31. Part1
Timing belt kit, Mitsu Outlander V6 3.0L 6B31, Aisin kit from Rockauto. 1
มุมมอง 8042 ปีที่แล้ว
Timing belt kit, Mitsu Outlander V6 3.0L 6B31, Aisin kit from Rockauto. 1
I'm curious are those breakers rated for 2 hot conductors under the lug?
Nope. Hack electrician
Good video .
What’s the website
In the video description
Howdy my friend. Can this tool see Fuel Composition and a and a button to reset it?
@@joehall2496 what do you mean?
What is that
Industrial 3 phase breaker
What did you take apart to get to the screw? And did you come the screw from above through the engine compartment?
Which screw?
The front screw who is alone
@ if you’re referring to the third mount, I remember at the end I had to drain the power steering fluid, lose the steering rack from inside the car, and drop the sub frame a little to get the mount out.
would you like to work with our Upgraded one -QDB-3A ?
@@hongwave-c1z yes
Thank you
May I ask which brand of tablet you are using?
Amazon tablet
7ft pound not 30 yikes i feel sorry for the next guy
What's the website for the software
Please i have thinkdiag how can i use it with diagzone
@@Engr.faisal360 just go to the website in the video
9 MOhms @500V is not ground fault
Nice and detailed video, much appreciated❤
What's the website address please
@@rudi330 for the dongle ?
He means the software , where to download
That looks loke a hole. Drill it and plug it
Ахренеть как интересно
How much horsepower
Where did you purchase the tester. I’ve purchased a lot from Martin Lauren but I’ve not seen this piece of test equipment. Thank you if you can help me locate it. 👍. Artie
@@arthurfricchione8119 Ali express
@@arthurfricchione8119 Just found this amazing item on AliExpress. Check it out! C$54.28 | Upgrade QDB-2A 3A Automobile Ignition Coil Tester Car Idle Stepping Motor Solenoid Valve Injector Actuator Fault Detector Driver a.aliexpress.com/_mq7cHcg
@@hybriddiyer6180 so many different price ranges . Have you purchased one ? I guess I’ll purchase the 3A. Such A wide range to select from. Artie 👍
@@arthurfricchione8119 the link is exactly what I got
@@arthurfricchione8119 I will put the link in the description
Cool!
I wish you could change mine
THX!! I couldn't figure it out. I have the D8S and having trouble reading fuel trims, and O2 sensor data. I'll give it a shot-
Can't hear you
Subscribed
Does it seem a lot better than Anyscan, it's nice seeing the topology
thanks for the shoutout Lori:)
It's always good seeing another diy'er with a few HS402's on the desk and other scopes:) I'm subscribing.
eles vendem aqui pro brasil e não funciona nos carros brasileiros é jogar dinheiro no lixo.
Estava pensando em compra no mercado livre mas vc falando não vou mais
@@gleison577 obd2 entra em varios carros brasileiros mais sem muitas funções na linha Honda Toyota bmw nissan ele é bom eu ativei ele só pra Honda e obd2 geral até q da pra ir usando
Did they claim that it could?
Will that fit 2012 Mitsubishi outlander Gt
The 2012 GT has the same engine 6B31. It should fit.
These Foxwell scanners are garbage. Bought both the NT650 elite and NT 710 and neither of them can perform a rear brake replacement on my 2021 Subaru outback. Useless junk
a new project to try thank you!
Have fun!
It's very important to know more about those 6B31 engines
As far as I know, WiFi uses Binary PSK modulation and QAM modulation. Both look slightly different to this.. Are you transmitting over the channel? Let me be frank, I find this very exciting as it's something I've always wanted to do myself. Hope you publish more on it soon!!
I don’t think this is a WiFi signal showing on the scope but a diy scope using WiFi to transmit its measurements to another device to show them… something like these usb scopes that use a computer to show their measurements. Anyway, very interesting still.
@@JuliaMono Oh, that would explain it, haha. But it is indeed quite interesting! Wonder if was all makeshift..
Please make a big video on this 🙏🙏🙏
I have a 2017 covic sedan i need to do my oil change
9:27 u hand tight the new oil filter jist make sure u have a good grip (no oil) and that should be fine no need to torque down the filter just hand tight as hard as u can with a firm non slippery grasp
Which kit did you order from rockauto ? Is it any good ?
I used the Aisin kit from Rockauto. I made another video and showed what comes in this kit.
Timing belt kit, Mitsu Outlander V6 3.0L 6B31, Aisin kit from Rockauto. 1 th-cam.com/video/N9wJ_Vg17l0/w-d-xo.html
It’s Xtool Anyscan A30. It’s a Bluetooth dongle that connect to the car and used the xtool app for android or iOS.
Hello Sir. Id like to know what type of Xtool system are you using? Is that an xtool App or tablet model like D7, D8?
After How Many KM can Change the Timing Belt in a Outlander V6 2011 year?
Every 105 000 miles (168 000 km)
@@hybriddiyer6180 after how many years the belt should be changed for low mileage vehicles? Mine is 60k kms and 7 years old. Dealer said it should be changed but according to the manual this should be done once every 10 years.
@@stpetar213 Every 105 000 miles (168 000km)
@@hybriddiyer6180are you aware of the max time interval for low mileage vehicles?
@@stpetar213 no, sorry
After How Many KM can Change the Timing Belt in a Outlander V6 2011?
You looks like didn't use the Front Hub and Flange Yoke Holder and Crankshaft Wrench?
I couldn’t get one. A powerful impact wrench can be used or a long breaker bar and spin the motor with the starter
Nice video, very detailed. i am going to replace my one later. Hopefully i can get it done without too much issues.
The main issue I had was the bold for the idle pulley. I had to drill and extracted it
I tried the same method to get the crank bolt free and the belt jumped a tooth. Now im really screwed. Cant impact it off and cant grab anything to get it loose... Any ideas?
Maybe rent a big impact or get the tool to hold the pulley
How many miles have you traveled after the time strap change?
I replaced the belt around 250 000 km. Right now I’m at 258 000 km.
Thank you for the video. Great video.
Thank you for posting. Stay gold.
Can you please explain this in detail ? Thank you
New battery, clean connection and it's okay now 🙂