Well if you know the steps to take it’s a duhh Easy Money just No Rushing see he’s in no hurry just doing everything step by step Kudos for Providing Simple Minds there is a OneMan Solution to Everything Employees think it’s Impossible Alone Nahhhhh it just takes longer
@@davidhall2522 thanks for the positive comment. This was a bet my guys were having a hard time working the floor because the rig was leaning slips wouldn’t set.. and the Kelley was hard to push back. I told him I thought I could do it by myself. They said it was impossible. The rest is history far as I know there’s not another video on the Internet globally. That is a true one man connection.
Men like this that built up USA and now giving it away to illegal immigrants to break it down. Deport the lot that are their just to benefit from the state.
@@johnmaclean1322 it went right back to bottom. You’d be down way longer than that to run a wire line survey. But I’m sure that was way before your time pup.
Enviromentalists complain about global warming. Imagine we hadnt sucked up all the explosive gases and liquads all these years. Now that would have been bad
You probably won't believe this but I was a floor hand and worked the floor single handed during a pipe trip one time for about 6 stands of pipe. I do not recall exactly how that happened but the tool pusher was running the rig and me the only floor hand. Mine were much faster than this drillers I can tell you that.
Good job tripping in a joint and then drill ...I would like to see him trip out a stand ,without a derick hand. Now that would be impressive, not that this wasn't.
@@jamiebullfrog I don’t know how y’all do it where you’re from. We dope the joint of pipe we put in the mouse hole .box-end and pin end . You do not have to dope anything when you’re making the connection that is already done..
@@MrSymbolic7 man, I appreciate the positive comments. there are so many men who are passing for roughnecks these days that have no clue what it was really like. And they are the ones talking the most crap . They have no clue what they’re even looking at .in fact like you say, I don’t think 75% of them would make it on a jacket knife break over Derrick with catheads and a spinning chain old school.. the motto then was if you can’t get it, you can’t stay.👍
@ I have worked in the oilfield industry for over 25 years. I broke out as a commercial diver diving off of platforms in the gulf, so no I’m not a “rough neck” never wanted to be one. That’s the lowest guy on the totem pole next to a tender and roustabout.
@@HappyBeagle-ie3sk I could tell by your comment you’ve never roughneck. So if you’ve never done it, we don’t need your opinion. and being a roughneck is a mentality. if you can’t get it, you can’t stay.
@ Mentality? Really? When you can do sat dives we will talk about mentality. Roughnecks are a dime a dozen, nothing but drunk convicts trippin out pipe. Wow, what a hard job. 😂
@@johnnyasmith3425 after all that you want to criticize pipe dope. for your information we dope the pipe when we put it in the mouse hole we do the pen end and the box end and it’s ready to go when we make the connection.
@@johnnyasmith3425 the pen end on the pipe in the mouse hole. That screwed into the one in the rotary table.. had dope on it. I doped it myself. I’m the guy in the video.😎
That fAt azz white hat hasn’t went that long without a coffee in his hand in 10 years, that must’ve been a paycheck bet to get him to move like that again
Back in '06 I used to do one-man tripping for 18 hour shifts. I'd pull thousands of feet of stands, run the monkey board AND break connections all by myself. Just one guy running a triple on the "Ocho" in Wamsutter. Once tripped out from '12,000 by myself - ran the mud tanks, generators, derrick, racked pipe, broke connections, changed bits, ran the forklift, jarred when stuck, replaced cable, and mixed mud/pumped slugs, while I was also company man and tool pusher and ran myself off/got re-hired TWICE- all by myself for 28 days straight in howling winter winds at -57 while keeping the steam plant going all the way to TD all by myself.
This is a baby ass single drilling with freshwater.. also back when I was working floors and motors, if we had a connection that took this long we’d all have been run off on the spot 😂 driller obviously is tight with the pusher and company man, because that took forever!! (Still kudos to the driller though that’s cool!)
@@TheBlueCollarBaller the rig was a triple. You could drill a ten thousand foot well. With it . Now any roughneck that has really roughnecked at all knows that as little double will work you harder than any big rig .
fake news bob. Agree to disagree. I worked in North Dakota, Wyoming and Colorado on several different styles of rigs and different styles of drilling. Drilling 20k+ ft with a horizontal and using invert for drilling fluid is hands down the hardest.. anything else felt like playing softball vs baseball I will say having an iron rough neck and joysticks definitely makes it easier on the driller though, that’s for damn sure.
@@TheBlueCollarBaller I was roughnecking before downhole motors before PDC bits and I roughnecked when you still had to roughneck, the only iron roughneck we had was all the men that worked on the Rig. You might know a lot about what’s going on today, but you have no clue about what went on in the real oilfield. And a double will by far make a a rough neck out of a man. and I’m here to tell you right now 90% of what’s passing for the oilfield today would not stand up in those days.
@@muddydawg47 just how fast is somebody supposed to create history worldwide. there’s not another one on the Internet anywhere. And if one guy built the empire state building. All by himself you would’ve said it took him a long time.. You like the little kid on a car trip (are we there yet?)
@cowboybob5265 well, if one man can do the job, why have all those employees on the payroll, maybe it's time to get rid of all those extra employees, lmao
I worked on drilling rigs all of my life this is no big deal..this guy is slow..we used to make 2 man connections all of the time.2 sleeping on morning tour 2 making conn. No big deal..worked on rigs in 7 rocky moutian states texas oklahoma kansas north dakota california etc...
@@StanKeebler you apparently don’t know much about a drilling rig. Or what it takes to get this done. you’ve just watched history being made. I’m sure this is not the first time this has been done , but it’s the absolute first time it’s ever been on video worldwide.
I sure bet you sleep well after your shift.
@@cds957 👍
That this isn’t automated is a shame. That guy is the equivalent of a revolutionary war soldier with a musket.
@@Tadesan 👍
Ol boy is even filming himself!
@@billydickinson265 that would have been cool.
He had to learn quick, because no one wanted to work for him!!
Well if you know the steps to take it’s a duhh Easy Money just No Rushing see he’s in no hurry just doing everything step by step Kudos for Providing Simple Minds there is a OneMan Solution to Everything Employees think it’s Impossible Alone Nahhhhh it just takes longer
@@Bombarded1n 👍
Awful a Kiwi up in derrick no pants & have to look up
That was well done, but a ton of shortcuts and lots of cord that could easily have tripped the roughneck up. He done good.
Gosh you punks calling him old ? You must think im ancient 😮
Sor might be the hardest working guy on the internet for those 12 mins. Super respect no matter y hes working alone
@@davidhall2522 thanks for the positive comment. This was a bet my guys were having a hard time working the floor because the rig was leaning slips wouldn’t set.. and the Kelley was hard to push back. I told him I thought I could do it by myself. They said it was impossible. The rest is history far as I know there’s not another video on the Internet globally. That is a true one man connection.
Total Respect!! Awesome job.
@@Johnny2step-j7k thanks for the positive comment . You must be or have rough necked before.
Men like this that built up USA and now giving it away to illegal immigrants to break it down. Deport the lot that are their just to benefit from the state.
Working drill collars in the derrick on a double with no aids , blows the cobwebs out
@@benwinter2420 👍
I came to see if there were any feminists claiming they can do it better.
@@SaltineCracker101 probably could.lol 👍
That man ain’t no hand he’s a whole arm 😂😂
@@williambevel3875 👍lol
One man band right there. Making sure her his profits are there!!!
The other dude with the cigarette in his mouth was moving 5x his speed
Meanwhile he's stuck in the hole. Eedjit!
@@johnmaclean1322 it went right back to bottom. You’d be down way longer than that to run a wire line survey. But I’m sure that was way before your time pup.
Enviromentalists complain about global warming. Imagine we hadnt sucked up all the explosive gases and liquads all these years. Now that would have been bad
You probably won't believe this but I was a floor hand and worked the floor single handed during a pipe trip one time for about 6 stands of pipe. I do not recall exactly how that happened but the tool pusher was running the rig and me the only floor hand. Mine were much faster than this drillers I can tell you that.
@@546cowboy6 👍
Good job tripping in a joint and then drill ...I would like to see him trip out a stand ,without a derick hand. Now that would be impressive, not that this wasn't.
Let's see him make a round trip from 15 thou. ft.down by himself 😅😅😅😅
@@electricman69 yeah because then he would really be doing something!👍
If I did that type of work that would be me I like working by myself
Lol😂, gotta be a be with all crew,but all I can say is great job and a one man connection, 👏👏👏 great job drill..
@@yrddi-or8et 👍
Why is he doing this by him self I seen 4 guys do this before Not safe
slowest connection in history
no pipe dope
make em bite worm
@@jamiebullfrog I don’t know how y’all do it where you’re from. We dope the joint of pipe we put in the mouse hole .box-end and pin end . You do not have to dope anything when you’re making the connection that is already done..
@@jamiebullfrog I could’ve carried you around on my shoulder when I made them bite. What are you talking about?.
4:05 good thing he was wearing those big heavy boots.. I hate wearing all that safety crap.. I bet smashed hands are the problem here.
You could not hire 4 hands today that could keep up with this guy , nothing but getting down to Business !
@@MrSymbolic7 man, I appreciate the positive comments. there are so many men who are passing for roughnecks these days that have no clue what it was really like. And they are the ones talking the most crap . They have no clue what they’re even looking at .in fact like you say, I don’t think 75% of them would make it on a jacket knife break over Derrick with catheads and a spinning chain old school.. the motto then was if you can’t get it, you can’t stay.👍
Must be an X eqt company man?
Hell half of them now these days couldn’t even run a rig like that 😝
@@craigbrandon4611 right! 👍
It’s not worth the bragging rights. These companies make millions. Get the help you need and don’t hurt yourself.
@@HappyBeagle-ie3sk you have never been a roughneck
@ I have worked in the oilfield industry for over 25 years. I broke out as a commercial diver diving off of platforms in the gulf, so no I’m not a “rough neck” never wanted to be one. That’s the lowest guy on the totem pole next to a tender and roustabout.
@@HappyBeagle-ie3sk I could tell by your comment you’ve never roughneck. So if you’ve never done it, we don’t need your opinion. and being a roughneck is a mentality. if you can’t get it, you can’t stay.
@ Mentality? Really? When you can do sat dives we will talk about mentality. Roughnecks are a dime a dozen, nothing but drunk convicts trippin out pipe. Wow, what a hard job. 😂
Hmmmm , did anyone else notice no pipe dope ?
@@johnnyasmith3425 after all that you want to criticize pipe dope. for your information we dope the pipe when we put it in the mouse hole we do the pen end and the box end and it’s ready to go when we make the connection.
@cowboybob5265 he didn't dope the box end in the slips , never trust anything other than what you know and do .
@@johnnyasmith3425 the pen end on the pipe in the mouse hole. That screwed into the one in the rotary table.. had dope on it. I doped it myself. I’m the guy in the video.😎
Cool .
You can’t tell this guy anything about your back hurting, he’ll laugh in your face. 😂
@@TexanTalk28 👍
now thats a roughneck !
Exactly they done took his belt
That fAt azz white hat hasn’t went that long without a coffee in his hand in 10 years, that must’ve been a paycheck bet to get him to move like that again
Thats my man.❤😊
@@uwealtersack2733 👍
Some days are just ball breakers huh..Happy holidays.. seen SE NM that Lea county or up into Artesia holes..nice save.🎄👍✌️👌🇨🇱🇺🇸😎🌎😁
@@Banchighostshadow that’s where I I was molded in a roughneck . At the early age of 18 .
@ ah.. yup.. work for Nabirs or McVey .. all those roads are home I’m old school from way back..Stay well and vigilant bud..👍✌️👌🇨🇱🇺🇸🌎😎🎄😇
@@Banchighostshadow yes sir
For those of you not quite sure this is what hard work really looks like. Great job sir.
@@JamesSalie thanks for the positive comment
Back in '06 I used to do one-man tripping for 18 hour shifts. I'd pull thousands of feet of stands, run the monkey board AND break connections all by myself. Just one guy running a triple on the "Ocho" in Wamsutter. Once tripped out from '12,000 by myself - ran the mud tanks, generators, derrick, racked pipe, broke connections, changed bits, ran the forklift, jarred when stuck, replaced cable, and mixed mud/pumped slugs, while I was also company man and tool pusher and ran myself off/got re-hired TWICE- all by myself for 28 days straight in howling winter winds at -57 while keeping the steam plant going all the way to TD all by myself.
@@daktrllcahobl9455 awesome
He probably has a cool name like Red or blackie.
👍
It's not impossible. It's just really hard work. My respect.
@@lar10101 thanks for the positive comment . 👍
This is a baby ass single drilling with freshwater.. also back when I was working floors and motors, if we had a connection that took this long we’d all have been run off on the spot 😂 driller obviously is tight with the pusher and company man, because that took forever!! (Still kudos to the driller though that’s cool!)
@@TheBlueCollarBaller the rig was a triple. You could drill a ten thousand foot well. With it . Now any roughneck that has really roughnecked at all knows that as little double will work you harder than any big rig .
fake news bob. Agree to disagree. I worked in North Dakota, Wyoming and Colorado on several different styles of rigs and different styles of drilling. Drilling 20k+ ft with a horizontal and using invert for drilling fluid is hands down the hardest.. anything else felt like playing softball vs baseball I will say having an iron rough neck and joysticks definitely makes it easier on the driller though, that’s for damn sure.
@@TheBlueCollarBaller I was roughnecking before downhole motors before PDC bits and I roughnecked when you still had to roughneck, the only iron roughneck we had was all the men that worked on the Rig. You might know a lot about what’s going on today, but you have no clue about what went on in the real oilfield. And a double will by far make a a rough neck out of a man. and I’m here to tell you right now 90% of what’s passing for the oilfield today would not stand up in those days.
@ I won’t deny 90% of what you just said bob. But I’m standing behind my statement above. Merry Christmas brother 🙏🏻 god bless
To slow, c,mon man 😂😂😂😂😂😂😂😂😂
@@muddydawg47 just how fast is somebody supposed to create history worldwide. there’s not another one on the Internet anywhere. And if one guy built the empire state building. All by himself you would’ve said it took him a long time.. You like the little kid on a car trip (are we there yet?)
@cowboybob5265 well, if one man can do the job, why have all those employees on the payroll, maybe it's time to get rid of all those extra employees, lmao
ok so you're doin it alone and now everything takes 4-5 times as long to do
@@futten3230 you’re impressed I can tell!! thinking, man I wished I would’ve done that .
I worked on drilling rigs all of my life this is no big deal..this guy is slow..we used to make 2 man connections all of the time.2 sleeping on morning tour 2 making conn. No big deal..worked on rigs in 7 rocky moutian states texas oklahoma kansas north dakota california etc...
@@StanKeebler you apparently don’t know much about a drilling rig. Or what it takes to get this done. you’ve just watched history being made. I’m sure this is not the first time this has been done , but it’s the absolute first time it’s ever been on video worldwide.
this gentleman has tripped more than one piece of drill pipe in his life.
Even his belt and suspenders walked off the job
@@nathansharp3193 oh that’s funny! 👍
Show this to gen z and its ai generated
@@Koof009 I don’t know if I didn’t get the joke. But it’s not AI generated..